Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
3-EN Bluetooth SETUP Bluetooth SETUP [ The explanations in this Owner’s Manual mainly describe the following operations from the AV head unit. Bluetooth Setup Operation The following steps 1 to 5 are common to the various Bluetooth functions. For details, refer to each individual function. • When calling, or selecting the Tel. mode or Bluetooth Audio source, Bluetooth Setup operation cannot be performed. • Refer to the Owner’s Manual of the CD Head unit, AV Head Unit or Digital Media Receiver, and set “Bluetooth IN” or “Bluetooth” to ADAPTER, and then perform Bluetooth SETUP operation. 1 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 2 Touch [SOURCE] or [ ] of SOURCE. The SOURCE SETUP screen is displayed. 3 Touch [ ] of BLUETOOTH or BLUETOOTH SETUP. The Bluetooth setup is displayed. 4 Touch [;] / [:] , [ON] / [OFF] or [ ] of the desired item to change its setting. Setting items: PAIRED DEVICES / DEVICE SEARCH / CLEAR DEVICE / VISIBLE MODE / AUTO ANSWER 5 Touch [RETURN] to return to the previous screen. Controlling from a CD Head Unit / Digital Media Receiver: 1 Press and hold SETUP for at least 2 seconds. 2 Turn the Rotary encoder or the Center jog dial to select Bluetooth or Bluetooth IN, and press ENT. 3 Turn the Rotary encoder or the Center jog dial to select the desired setting items and press ENT. Setting items: Bluetooth IN- Paired Device* - Visible Mode* - AUTO Answer* - Clear Device* * When “Bluetooth IN” or “Bluetooth” is set to ADAPTER, the above items are displayed. 4 Turn the Rotary encoder or the Center jog dial to change the settings. 5 Press ENT. (Depending on the connected units, this operation may not be necessary.) 6 Press and hold ESC (or SETUP) or BACK for at least 2 seconds. The SETUP mode is canceled. Setting the Bluetooth Device Select one of 5 connected Bluetooth compatible devices that you previously registered (one registered by guest mode*). Setting item: PAIRED DEVICES 1 Select a Bluetooth compatible device to use (change connection) from the PAIRED DEVICE list. 2 Touch [:]. • If the connection is successfully changed, “CONNECTED/ (Device name)” is displayed for 2 seconds, and then the display returns to the SETUP screen. • If you input the wrong passcode or communications fail, “FAILED” is displayed. • If you want to connect another Bluetooth compatible device, after disconnecting the current Bluetooth compatible device, connect the Bluetooth compatible device you want to change to. The PIN code is fixed as “0000.” * Guest mode: Use this mode for a temporary pairing. Registration (in guest mode) is canceled once the ignition key goes from ACC to off. Controlling from a CD Head Unit / Digital Media Receiver: 1 Turn the Rotary encoder or the Center jog dial to select a Bluetooth compatible device you want to use (you want to change connection). 2 Press ENT. (Depending on the connected units, this operation may not be necessary.) 4-EN Registering the Bluetooth Device (AV Head Unit only) The Bluetooth device is used when a connectable Bluetooth compatible device is searched and connected from an AV head unit, or a new Bluetooth compatible device is registered. Setting item: DEVICE SEARCH 1 When DEVICE SEARCH is selected, “SEARCHING...” is displayed, and searching starts. 2 Touch [:] of a device name to be connected from the DEVICE SEARCH list. 3 If the adapter is successfully connected to a Bluetooth compatible device, a paired device name and a registered number (No. 1 to 4 or guest mode) are displayed, and then the unit returns to normal mode. • If a mobile phone is registered for the first time: Input a passcode when the numeric keypad screen is displayed. • A passcode input on a AV Head Unit is maximum 4-digit. If a passcode on the Bluetooth compatible device exceeds 4 digits, reset the passcode and make this setting again. Deleting a Bluetooth Device from the list You can delete the history of a previously connected Bluetooth compatible device. Setting item: CLEAR DEVICE 1 Touch [:] of the Bluetooth compatible device you want to delete from the CLEAR DEVICE list. A message is displayed. 2 Touch [YES] if you want to delete. • Touching [NO] will cancel the setting. Controlling from a CD Head Unit / Digital Media Receiver: 1 Turn the Rotary encoder or the Center jog dial to select the Bluetooth compatible device to be deleted. 2 Press ENT. (Depending on the connected units, this operation may not be necessary.) Setting the Search Mode You can set whether the KCE-300BT can be recognized or not from a Bluetooth compatible device. Normally set this to ON. Setting item:VISIBLE MODE ON: Enable recognition of the KCE-300BT from the Bluetooth compatible device. OFF: Disable recognition of the KCE-300BT from the Bluetooth compatible device. • Depending on the mobile phone, you may be necessary to input passkey (passcode). For a mobile phone’s passkey (passcode) input operation, refer to the mobile phone’s Owner’s Manual. Setting the Received Calls automa...
Эта инструкция также подходит к моделям:Наушники и микрофоны - KCE-300BT (3.92 mb)