Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Failure to do so can result in serious injury. Save this manual. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. SKU 99901 For technical questions, please call 1-800-444-3353. Page 2 Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Safety Alert Symbol and Signal Words In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. IMPORTANT SAFETY INSTRUCTIONS Instructions Pertaining to a Risk of Fire, Electric Shock, or Injury to Persons WARNING – When using regulators, basic precautions should always be followed, including the following: General To reduce the risks of electric a. shock, fire, and injury to persons, read all the instructions before using the regulator. Work area Keep the work area clean and well a. lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. Keep bystanders, children, and b. visitors away while operating the regulator. Distractions are able to result in the loss of control of the regulator. Personal safety Stay alert. Watch what you are doa. ing and use common sense when operating the regulator. Do not use the regulator while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the regulator increases the risk of injury to persons. Avoid unintentional starting. Be b. sure the tool switch is off before connecting to the CO2 Regulator. Do not connect the tool to the CO2 Regulator with the switch on. c. Always wear eye protection. Wear ANSI-approved safety goggles. d. Always wear hearing protection when using the regulator. Prolonged exposure to high intensity noise is able to cause hearing loss. Regulator use and care Use only with tools specifically dea. signed for use with bottled gasses. Read tool manual before connecb. tion and/or use. Assemble, use and store in a well-c. ventilated area only. Carbon dioxide gas is invisible and odorless can accumulate in confined spaces. Use with carbon dioxide gas only.d. Attach the Hose properly to the e. Regulator and tool before use. A loose Hose may detach or break during operation. Do not use the regulator if the f. Regulator Control Knob does not function properly. Any regulator that cannot be controlled is dangerous and must be repaired. Disconnect the tool from the COg. 2 Regulator before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally. Turn off and detach the CO2 supply, safely discharge any residual pressure, and release the throttle and/or turn the switch to its off position before leaving the work area. Store the regulator and gas canish. ter when idle out of reach of children and other untrained persons. A regulator is dangerous in the hands of untrained users. Do not exceed 150 PSI input presi. sure. WARNING: The brass compoj. nents of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code 25249.5, et seq.) The warnings and precautions k. discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Service Regulator service must be pera. formed only by qualified repair personnel. Replacement parts are not available for this product. Discard product if it cannot be repaired by techn...