Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Save this manual. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. REV 10a SKU 99780-81 For technical questions, please call 1-800-444-3353. Page 2 Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Important SAFETY Information In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. General Safety Warnings WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in explosion, fire and/or serious injury. Save all warnings and instructions for future reference. Work area safety1. Keep work area clean and well lit. a. Cluttered or dark areas invite accidents. Do not operate tools in explosive b. atmospheres, such as in the presence of flammable liquids, gases or dust. Tools become hot which may ignite the dust or fumes. Keep children and bystanders c. away while operating a tool. Distractions can cause you to lose control. Electrical safety2. Tool plugs must match the outlet. a. Never modify the plug in any way. Do not use any adapter plugs with grounded tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose tools to rain or wet c. conditions. Water entering a tool will increase the risk of electric shock. Do not abuse the cord. Never use d. the cord for carrying, pulling or unplugging the tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. If operating a tool in a damp locae. tion is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. Personal safety3. Stay alert, watch what you are doa. ing and use common sense when operating this tool. Do not use this tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating tools may result in serious personal injury. Use personal protective equipb. ment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. c. Ensure the switch is in the off-position before connecting to power source or moving the tool. Do not overreach. Keep proper d. footing and balance at all times. This enables better control of the tool in unexpected situations. Dress properly. Do not wear loose e. clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Only use safety equipment that f. has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Tool use and care4. Do not force the tool. Use the a. correct tool for your application. The correct tool will do the job better and safer at the rate for which it was designed. Do not use the tool if the switch b. does not turn it on and off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. Disconnect the plug from the c. power source of the tool before making any adjustments, changing accessories, or storing tools. Such preventive safety...
Эта инструкция также подходит к моделям:Насосное оборудование - 99781 (1.46 mb)