Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
. . . 5.47 Ohms @ 68°F (20°C) Start . . . 5.28 Ohms *Test Conditions for Performance Specifications Test Oil ................ISO VG 10 Shell Temp ..............170.0°F / 76.0°C Condensing Temp.........(I) 130.0°F / 54.4°C .........(II) 105.0°F / 40.6°C Evaporating Temp.........-10.0°F / -23.3°C Ambient Temp............90.0°F / 32.2°C Gas Superheat ...........90.0°F / 32.2°C Liquid Sub-Cooling ........90.0°F / 32.2°C Electrical Accessories'1' Overload Protector Nominal Operating Characteristics Model Name Manufacturer Temperature To Trip Current . . . 4TM319MFBYY Texas Instruments . Open: 239°F ± 9°F / 115°C ± 5°C Close: 142°F ± 16°F / 61°C ± 9°C . @158°F (70°C) 2.70 Amps ± 7.5% @77°F (25°C) 12.0 Amps @ 18 sec. max. P.T.C. Starting Device Nominal Operating Characteristics Model Name Manufacturer Base resistance @ 77°F(25°C) ±20% Power Consumption (max) Operation time Recovery time (max) PTH490C-AS6R8 Murata Mfg. 6.8 3.5 1.0 to 2.7 65 Ohms Watts seconds seconds Run Capacitor — |jF — V tAlthough these accessories are listed by UL/CSA for use with this compressor, Matsushita assumes no responsibility whatsoever for these or any other components sourced by the refrigeration system manufacturer from third parties. Refrigerant Control . . Capillary Tube Evaporator Temp. Range.......-31°F to 23°F / -35°C to -5°C Performance Curves 20 X 3 -40 -30 -20 -10 0 Evaporating Temperature (°F) 10 20 --110°F----120°F 130°F 9 - Point Data Evaporating Temp. Condensing Temp. Rating -30F -10F + 10F 130F Btu/h 259 604 1,086 Watts 87 135 185 Amps 1.35 1.64 2.00 E.E.R. 2.96 4.48 5.89 120F Btu/h 304 638 1,099 Watts 90 133 176 Amps 1.37 1.62 1.93 E.E.R. 3.37 4.79 6.25 110F Btu/h 338 662 1,127 Watts 92 127 164 Amps 1.37 1.59 1.85 E.E.R. 3.66 5.20 6.87 Panasonic' Panasonic Industrial Company Refrigeration Products Department Tel: 201 - 392 - 4249 Fax: 201 - 392 - 4315 Rev#1-5/9 MATSUSHITA Compressor MODEL# DD51C78GBU6 Single Phase 115 V R-134a 60 Hz Dimensions* mm inches Tubes Tube O.D. Wall Material A..................... 201.0 ......... .......... 7.91 Suction ........ . . 0.33 in. / 8.3 mm 0.035 in. / 0.9 mm Copper B ..................... 73.4 .......... .......... 2.89 Process ....... . . 0.33 in. / 8.3 mm 0.035 in. / 0.9 mm Copper C ..................... . 127.6......... .......... 5.02 Discharge ...... . . 0.33 in. / 8.3 mm 0.035 in. / 0.9 mm Copper D ..................... . 83.9.......... .......... 3.30 E ..................... 70.4 .......... .......... 2.77 U.L. File # . . . . .....SA 4615 F ..................... 75.2 .......... .......... 2.96 C.S.A. File #’s . .....LR - 36593 * All dimensions are for reference only This document sets forth certain operational parameters and conditions for operation of this product. If this product is operated outside of the parameters and conditions stated herein, buyer assumes sole and full responsibility and shall indemnify seller with respect to all product failures and all consequences thereof. Operation of the product outside of the parameters and conditions specified herein shall serve to invalidate all seller warranties, if any, with respect to the product. This document is for reference only. For specifications, please contact Panasonic's engineering department. General Data Oil Charge . . 250 cc ± 5 cc / 15.3 cu.in. ± 0.3 cu.in. Net Weight With Oil............18.3 lbs, 8.3 kg Approved Oils: FREOL . . a 10, a 10E, a 15, a 15E, a 22, a 22E ICI .................RL10H, RL15H, RL22H HENKEL ..............ProEco 10S,15S, 22S Residual Moisture...............120 mg max. Impurities ...................... 10 mg max. Displacement ...........5.10 cc. / 0.311 cu. in. Panasonic® Panasonic Industrial Company Refrigeration Products Department Tel: 201 - 392 - 4249 Fax: 201 - 392 - 4315 Rev#1-5/9...