Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
* Use only the specified AC adaptor (PSA-Series). Panel Description 2. CHECK Indicator This indicator shows whether an effect is ON/OFF, and also doubles as the Battery Check indicator. The indicator lights when an effect is ON. * If this indicator goes dim or no longer lights while an effect is ON, the battery is near exhaustion and should be replaced immediately. For instructions on changing the battery, refer to “Changing the Battery” (p. 12). * The CHECK indicator shows whether the effect is being applied or not. It does not indicate whether the power to the device is on or not. 3. OUTPUT-A (MONO) Jack OUTPUT-B Jack The output jacks are used to connect the unit to an amplifier or another effects unit. 4. INPUT-A (MONO) Jack INPUT-B Jack These jacks accept input signals (coming from a guitar, some other musical instrument, or another effects unit). * The unit’s functions differ according to how it is connected. Refer to “Outputting Only the Effect” (p. 11). * When running the unit on battery power, the INPUT-A (MONO) and INPUT-B jacks double as power switches. Power to the unit is turned on when you plug into the INPUT-A (MONO) or INPUT-B jack; the power is turned off when the cable is unplugged. Be sure to disconnect any cord plugged into the INPUT-A (MONO) or INPUT-B jack when not using this effects device. When the AC adaptor is used, the power remains on at all times, and this function is disabled. Panel Description 5. Pedal Switch Used for switching effects on/off, and for inputting the tempo. 6. Thumbscrew When this screw is loosened, the pedal will open, allowing you to change the battery. * For instructions on changing the battery, refer to “Changing the Battery” (p. 12). 789 10 7. E.LEVEL (effect level) Knob This adjusts the volume of the effect sound. Turn the knob to the right (clockwise) to increase the effect sound. Panel Description 8. TONE Knob This adjusts the tone of the reverb sound. The more you turn the knob to the right (clockwise) of center (standard), the brighter the sound becomes; turn the knob to the left of center to create a sound with greater warmth. 9. TIME Knob This adjusts the length (time) of the reverb sound. 10. MODE Switch Selects the reverb effect and pedal mode. * Immediately after the MODE switch is switched, operating the pedal produces no result. SPRING: This simulates the sound of a guitar amp’s built-in spring reverb. PLATE: This simulates the sound of a plate echo (a type of reverb that uses the vibrations of a metal plate). It provides a metallic-sounding reverberation with an extended high end. HALL: This simulates the reverb sound of a larger hall. ROOM: This simulates the reverb sound of a smaller room. GATE: Produces a uniquely distinctive effect in which the reverberation sound is condensed. MODULATE: This is a completely new reverb that adds modulation to the hall reverb to produce an extremely pleasant reverb sound. Connections AC adaptor Guitar Amplifier OUT DC 9V/200mA BOSS PSA-series (option) Keyboard Electric Guitar * Be sure to lower the output level of any device being connected. Connections * When running the unit on battery power, inserting a plug into the INPUT-A (MONO) or INPUT-B Jack will automatically switch the unit on. * The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type. * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * If there are batteries in the unit while an AC adaptor is being used, normal operation will continue should the line voltage be interrupted (power blackout or power cord disconnection). * Once the connections have been completed (p. 8), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. When powering up: Turn on the power to your guitar amp last. When powering down: Turn off the power to your guitar amp first. * Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction. * When operating on battery power only, the unit’s indicator will become dim when battery power gets too low. Replace the battery as soon as possible. Operating the Unit 5432 1. When you have made the necessary connections (p. 8), depress the pedal switch to turn the effect on. (the CHECK indicator turns red.) * The unit’s functions differ according to how it is connected. Refer to “Outputting Only the Effect” (p. 11). 2. Select the mode with the MODE switch. 3. Adjust the reverb time with the TIME knob. 4. Adjust the tone of the reverb sound with the TONE knob. 5. Adjust the effect volume level with the E.LEVEL knob. Outputting Only th...
Эта инструкция также подходит к моделям:Музыкальные инструменты - RV-5 (601.41 kb)