Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Make sure all items listed on the front of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT 3. Study this setup diagram. 4. Place mixer in an appropriate position for operation. 5. Make sure all devices are turned off and all faders are at “zero” 6. Connect all stereo input sources as indicated in the diagram. 7. Connect the stereo outputs to the power amplifier(s) , tape decks, and/or audio sources. 8. Plug your mixer and other devices into AC power. 9. Switch everything on in the following order. • audio input sources (i.e. turntables or CD players) • your mixer • last, any amplifiers 10. When turning off, always reverse this operation by, • turning off amplifiers • your mixer • last, any input devices 11. Go to audio.com for product registration. FRONT PANEL FEATURES 1. Replaceable Crossfader: This slide fader blends audio between channels 1 and 2. Note: This fader is user replaceable if it should ever wear out. Simply remove the face plate and then remove the screws holding it in position. Replace the fader with an authorized replacement from ION Audio Customer Service. 2. Power LED: Illuminates when the mixer is on. 3. Gain: This adjusts the channel’s input level. Turn it up as far as possible without distorting. 4. Cue Select: Use this switch to determine what you hear through the headphones. When set to the left, you will hear Channel 1. When set to the right you will hear Channel 2. At the center, you will hear the Master output, which includes the microphone and crossfader. 5. Input Selector: This toggles what input source is routed to the channel from the rear panel inputs. The left selects the Phono (turntable) or Line (CD Player) and the right selects the USB Audio Input. While using the iCJ01 with your computer, the switch should be right, selecting the USB audio inputs. 6. Mic Level: This knob adjusts the volume of the microphone input. 7. Master: This adjusts the main output volume. 8. Cue Gain: This adjusts the volume level to your headphones. 9. Headphone Jack: Plug in your headphones here. The volume should always be set at its lowest setting while connecting and disconnecting headphones to prevent damage to headphones and/or your hearing. 10. Microphone Input: Microphones with a .” connector can be connected to this jack. REAR PANEL FEATURES 11. USB Input 1/ Master Level Output: This USB jack sends the audio from your computer to Channel 1. This is also the simultaneous master output for recording. This output level is adjusted by the master gain control. 12. USB Input 2/ Record Level Output: This USB jack sends the audio from your computer to Channel 2. This is also the simultaneous fixed recording output for recording. This output level is fixed. NOTE: Your mixer can simultaneously record through the USB Output while it is playing audio sources. For more information refer to the “Using your USB Mixer with a Computer” manual included. 13. Power Switch: Use this swi...
Эта инструкция также подходит к моделям:Музыкальные инструменты - iCJ01 (684.45 kb)