Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
This symbol advises the user to read all accompanying literature for safe operation of the unit. Congratulations on your purchase of a Fender Passport PD-250 high performance, self-contained portable audio system. Your Passport includes everything you will need for great sound… Anywhere. Carry your Passport as you would a large sized suit case. Flip open the speaker latches, and you’ll discover two full- range speaker cabinets, a powered mixer, dynamic microphones, plus all the cables you need to get started. Use your Passport to amplify voices, musical instruments, computer sound cards, CD’s, tape playback and more. Passport’s quick and easy set-up, its ability to cover large audiences and simple operation are the hallmarks of this innovative product line. The Passport’s control panel features four mono mic/line inputs and two stereo channels (six channels total). The stereo input channels can be used for either mono or stereo operation allowing superb flexibility in input use. Moreover, the revolutionary speaker technology in each speaker enclosure deliver remarkably clean, full range sound with exceptional audience coverage and remarkable feedback rejection. The self-powered mixer provides a total of 250 watts of high quality stereo sound. For vocal operation, the Passport’s VIP (Vocal Input Priority) feature can be used to reduce or “duck” the background music level as you begin to speak and then restore your background music when you have finished speaking. Experiment with the tone controls, digital reverb and speaker placement and discover the Passport’s incredible power and versatility. IMPORTANT SAFEGUARDS: – WARNING : TO PREVENT DAMAGE, FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. – NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED PERSONNEL ONLY. – THIS UNIT MUST BE EARTH GROUNDED. 3 SAFETY PRECAUTIONS TRANSPORTATION LATCHES TRANSPORTATION LATCHES The Fender Passport sound system is supplied with a detachable power cable with an IEC female connector and a male AC connector. Depending on the territory in which the Passport system is purchased, the power cable will be supplied with one of a number of male AC connectors to accommodate the different safety and code requirements of specific countries. All AC cables supplied with Passport products are three pin grounded types. Under no circumstances should the ground (earth) pin be disconnected or removed. Your Passport System features a Switch-Mode-Power- Supply designed to operate on any AC voltage and line frequency to convert AC power with maximum efficiency. When traveling abroad with the Passport system, as a standard precaution, always check the local voltage and set the voltage selector switch located adjacent to the power input socket on the rear of the mixer / amplifier to the appropriate operating range. This check must be performed before connecting the power cable. The Fender Passport has two range settings: 115 V or 230 V. Failure to select the appropriate voltage range will cause the unit to go into protect mode, void any warranty and may cause damage to the unit. For example, The United States of America is standardized at 117 volts / 60 Hz, Japan operates on 100 volts / 50 Hz. For both of these countries the range selector must be set to 115 V. Countries in the EEC have standardized at 230 volts / 50 Hz., however, there are different types of AC plugs used. For all these countries the selector should be at the 230 V position. When using plug adapters or operating in a territory other than the one in which the unit was purchased, take great care to comply with local safety requirements and electrical codes of practice. If you are not sure of the local voltage, wiring codes & colors, AC grounding, or correct procedures for connection, consult a qualified technician. Warning Under no circumstances should the ground pin on the Passport or on any of your electrical equipment be lifted (cut off or disconnected). By following the correct procedures and safety precautions, risks of severe shock hazard can be minimized. Best of all, avoid operating the system in conjunction with ungrounded or improperly grounded electrical equipment. To open and close your Passport system, simply follow these guidelines: 1. Place your finger tip under the safety latch and gently lift. When the safety latch has disengaged, lift the main latch to remove the speaker. 2. To replace, position the speaker on the tower foot and bring the speaker in to close the engagement with the tower and latch. Position the latch hook over the speaker notch and close the latch. The safety latch will automatically engage. Note: These parts are precision engineered and no force is needed to secure them. Careful alignment of parts will ensure easy operation. 4 5 CHANNNELS 1 - 4 J. LEVEL – Adjusts the volume level of the individual channel. Rotating the knob clockwise increases the respective channel’s contribution to the “Main Out” mix, while rotating...