Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
It’s an allrounder with so many features that you hardly need any other equipment. Use it as a guitar combo to deliver 2 x 60 Watts stereo with internal or external loudspeakers. However you use your V-AMPIRE, you will always profit from its enormous flexibility. So enough talk: Nothing will convince you more than what you actually hear and feel when you play your V-AMPIRE. But ... 1.1 ... before you get started Your V-AMPIRE was carefully packed at the assembly plant to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage. Damaged equipment should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery. Otherwise, all claims for replacement/ repair may be rendered invalid. Please always use the original packaging to avoid damage due to storage or shipping. Never let unsupervised children play with the V-AMPIRE or with its packaging. Please dispose of all packaging materials in an environmentally friendly fashion. Please make sure the unit is provided with sufficient ventilation, and never place the V-AMPIRE in the vicinity of heaters to avoid the risk of overheating. Before you connect the unit to the mains, please make sure that the voltage setting on the unit matches the local voltage! Please refer to the important information on this topic given in chapter 8: “INSTALLATION”. Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor from the unit or of the AC power cord. The unit shall always be connected to the mains socket outlet with a protective earthing connection. The MIDI connections (IN, OUT/THRU) are for standard DIN connectors. Data is transferred via ground-free opto-couplers. Further information can be found in chapter 8 “INSTALLATION.” I.I.I Online registration Please do remember to register your new BEHRINGER equipment right after your purchase by visiting (alternatively and kindly read the terms and conditions of our warranty carefully. Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nearest you. A list of distributors can be found in the support area of our website (support). Registering your purchase and equipment with us helps us process your repair claims quicker and more efficiently. Thank you for your cooperation! 1.2 The manual This manual has been designed so that you can get a clear overview of all control elements and at the same time find detailed information on how to use them. To let you quickly get an overview of different topics, we have grouped various control elements according to their function. If you need more information on specific topics, please visit our web site at For example, there you can find complete information about MIDI implementation. 4 I. INTRODUCTION V-AMPIRE LX1200H/LX210 Fig. 2.1: V-AMPIRE’s control elements (front panel LX1200H) 2.1 Front panel m The GAIN control determines the distortion level and the saturation of an amp simulation. I~2~l The VOLUME control determines the volume of the selected preset. l~3~l The BASS control in the EQ section is for boosting or cutting the low-frequency range. I~4~l The MID control is for boosting or cutting the mid-range frequencies. m TREBLE controls the high-frequency range of the selected preset. C The LED rings around the VOLUME, BASS, MID, TREBLE, GAIN, EFFECTS and REVERB controls each have nine LEDs. On each ring either one LED or two neighboring LEDs (in between position) will light up at a time, indicating a total of 17 different positions. If the TAP button [W| is pressed, the TREBLE control functions as a PRESENCE control. This enables you to boost/cut a high-frequency filter tuned to whatever amp model is active, thus simulating the frequency-dependent negative feedback of tube amps. nn The AMPS control is for selecting one of 32 different amplifier simulation models. The control is surrounded by a ring of 16 LEDs. Each LED corresponds to two types of amplifiers. The first 16 simulations can be selected by turning the AMPS control. To select the simulation models 17 - 32, press down the TAP button while making your selection by turning the AMPS control. The LED “17 - 32” in the bottom left-hand corner of the DISPLAY indicat...