Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Музыкальные инструменты - AUDIOGRAM3 (286.33 kb)
Музыкальные инструменты - AUDIOGRAM3 (300.07 kb)
Фрагмент инструкции
After reading the manual, please store it in a safe place. Contents Introduction.................................................................................... 5 Contents.......................................................................................... 5 Features .......................................................................................... 6 Setup............................................................................................... 7 Quick Guide ................................................................................... 8 1. Cubase AI Download .................................................................. 8 2. Connecting to the AUDIOGRAM interface .................................. 8 3. Powering Up the System ............................................................ 9 4. Adjusting Level.......................................................................... 10 5. Audio Setup of the Software ..................................................... 10 Controls and Functions .............................................................. 14 Input Signal Flow .......................................................................... 15 Troubleshooting .......................................................................... 16 Specifications .............................................................................. 23 General Specifications .................................................................. 23 Dimensional Diagrams .................................................................. 23 Block Diagram and Level Diagram ............................................... 24 AUDIOGRAM 3 Owner’s Manual 5 Introduction Features Introduction Features Connect To Your Computer via a Single USB Cable (page 8) The AUDIOGRAM interface connects to your computer via the supplied USB cable. Stereo audio data is transferred in both directions—from the interface to the computer, and vice-versa—via the USB connection (44.1 kHz or 48 kHz sampling frequency). No Driver Installation Required (page 8) The AUDIOGRAM system uses the standard drivers included in your computer’s operating system, so there’s no need to install any extra driver software. 48V Phantom Power (page 14) A PHANTOM switch supplies +48V phantom power to the channel 1 microphone input, so you can use high-quality phantom-powered condenser microphones for superior recording quality. Accessories • Cubase AI Download Instructions • USB cable • Owner’s Manual (this book) 6 AUDIOGRAM 3 Owner’s Manual Setup Be sure to turn the PHANTOM +48V switch (.) on when using a phantom-powered condenser microphone. Microphone Keyboard, etc. Computer Headphones Audio system To connect a device such as a microphone: To connect an instrument such as an electric guitar or bass: USB cable Cubase AI AUDIOGRAM 3 Owner’s Manual 7 Quick Guide Quick Guide Controls and Functions” section on page 14, as well as the pdf manual supplied with the Cubase AI software. Step Cubase AI Download 1 We are offering Cubase AI free for downloading via website, specifically for customers who have purchased Audiogram series. For detailed instructions on downloading, access the URL shown in the Cubase AI Download Instructions leaflet. Step Connecting to the AUDIOGRAM interface 2 OUT LEVEL controlLEVEL controls Be sure to turn the PHAN- TOM +48V switch on when using a phantom-powered condenser microphone. 1 Turn all gear that is to be connected to the AUDIOGRAM off or to standby mode (except the computer), and set the LEVEL controls and OUT LEVEL control to their minimum settings. 2 Connect microphones and/or instruments. For details on making connections refer to the “Setup” section on page 7 and the “Controls and Functions” section on page 14. 3 Set the MIC/INST switch according to the type of device connected to channel 1. Select MIC ( ) if a microphone is connected, or INST ( ) if a guitar or similar instrument is connected. 8 AUDIOGRAM 3 Owner’s Manual Quick Guide Quick Guide Powering Up the System 3 To prevent loud pops and noises, turn on the power to your sound gear starting with the sources (instruments, CD players, etc.) and ending with the audio system (monitor speakers). 1 Turn on the instruments and microphones. 2 If you are using a condenser microphone for the channel 1, turn on the PHANTOM +48V switch. Observe the following precautions when turning on phantom power. • Make sure that the PHANTOM +48V switch is off when phantom power is not CAUTION needed. • When turning the switch on, be sure that only a condenser microphone is connected to the MIC/INST input jack. Other devices may be damaged if connected to phantom power. This precaution does not apply to balanced dynamic microphones or instruments with the phone jack, however, as these will not be affected by phantom power. •To prevent damage to speakers, be sure to turn off audio system (monitor speakers) before turning this switch on or off. We also recommend that you set the OUT L...