Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
At this time, you do not have to English turn off the power to either device. mLAN8P mLAN (IEEE1394) device IEEE1394 standard cable IEEE1394 standard cable MIDI -OUT-A IN SERIAL I/O RT/ERR ACTIVE mLAN IEEE1394 S200 12I I Macintosh computer that supports FireWire (4) Connecting a Windows computer (serial connection) Use a serial cable to connect the computer’s RS232C jack to the mLAN8P’s SERIAL I/O jack. At this time, make sure that the power to the computer and the mLAN8P is turned off. NOTE Make this serial connection when using the included software on Windows. To use on a Macintosh, connect the mLAN8P’s mLAN jack and the Macintosh’s FireWire port using an IEEE1394 cable. (See “Connecting an mLAN device.”) Use a standard D-SUB 9P ® MINI DIN 8P cable mLAN8P IEEE1394 -IN SERIAL I/O T/ERR CTIVE S200 1I RS-232C (DB9) computer Connections Connections h (5) Connecting analog audio devices (amplifier, speakers, mixer, etc.) Connect ANALOG OUT 1/L and 2/R to two channels on the mixer. mLAN8P CONTRAST ANALOG -I OPTICALCOAXIAL OUT IN OUT DC IN OUT2/R OUT1/L IN2/R (6) Connecting a digital audio device Use digital audio cables to connect a digital audio device, such as a CD player or MD player, to the mLAN8P’s digital in/out. • Using OPTICAL jacks • Using COAXIAL jacks mLAN8P mLAN8P OPTICAL OUTIN CONTRAST ANALOG MIDI OUT-B OUT-A IN SERIAL I/O RT/ERR ACTIVE mLAN IEEE1394 S200 123 OPTICALCOAXIAL OUT IN OUT IN DC IN OUT2/R OUT1/L IN2/R IN1/L OPTICAL OUT OPTICAL IN OUT COAXIAL IN CONTRAST ANALOG MIDI OUT-B OUT-A IN SERIAL I/O RT/ERR ACTIVE mLAN IEEE1394 S200 123 OPTICALCOAXIAL OUT IN OUT IN DC IN OUT2/R OUT1/L IN2/R IN1/L COAXIAL OUT COAXIAL IN digital audio device digital audio device NOTE Select COAXIAL IN jacks or OPTICAL IN jacks. (page 33.) Connections Connections Connecting a pair of headphones Connect a pair of headphones to the PHONES jacks on the front panel of the mLAN8P to monitor the signal output at ANALOG OUT 1/L and 2/R (Stereo Mix). PHONES Turning the Power On/Off Power-On Sequence for Connected Devices When you finish connecting the mLAN8P and necessary devices, make sure that the volume level of the mLAN8P and the audio equipment is set to minimum (0), then turn on the power to the MIDI transmit device, MIDI receive device, and audio equipment (mixer, then amplifier) in this order. To turn off the power to the devices, first lower the level of the audio equipment, then reverse this order. If the devices are connected via mLAN, you do not have to follow the order of turning the power on and off. English Internal Configuration of the mLAN8P Internal Configuration of the mLAN8P h mLAN device (e.g., S80+mLAN8E) MIDI device MIDI IN mLAN8P mLAN audio input*3 Digital Mixer section*1 mLAN MIDI IN MIDI/ mLAN MIDI conversion mLAN MIDI/ MIDI conversion COAXIAL OUT OPTICAL OUT (Digital Out) ANALOG OUT (D/A Out) MIDI OUT-A/B Output destination selection Digital/analog (D/A) conversion mLAN MIDI OUT MIDI device MIDI device e.g., MD e.g., powered speakers 1/L, 2/R (=PHONES) Input mLAN cables mLAN signals non-mLAN cables Output non-mLAN signals Internal Configuration of the mLAN8P Internal Configuration of the mLAN8P mLAN output plugs (Indicated in the “From” field in mLAN Patchbay.) mLAN audio St Mix L (stereo mix L) St Mix R (Stereo mix R) AUX1 AUX2 *Dig In L (Digital In L) *Dig In R (Digital In R) *A/D In L (ANALOG In L) *A/D In R (ANALOG In R) mLAN MIDI *IN (MIDI IN) mLAN input plugs (Indicated in the “To” field in mLAN Patchbay.) mLAN audio Input1 Input2 Input3 Input4 Input5 Input6 Input7 Input8 mLAN MIDI *OUT-A (MIDI OUT-A) *OUT-B (MIDI OUT-B) English About the name of mLAN plugs: Some mLAN plug names start with an asterisk (*). This means that they are directly connected to the rear panel connectors of the mLAN8P. For example, “*IN (MIDI IN)” plug outputs signals input at the MIDI IN terminal (on the rear panel of the mLAN8P) to the mLAN bus. This plug is regarded as an mLAN output plug, but the name includes “*IN” since it outputs signals input at the MIDI IN terminal. In the same way, “*OUT-A (*MIDI OUT-A)” plug is an mLAN input plug, but the name includes “*OUTA” since it inputs signals output at MIDI OUT-A on the rear panel. The diagram on the left illustrates the entire signal flow. You can set the input source and output destination for audio and MIDI signals of the various devices after they are connected to the mLAN8P. The mLAN8P, especially with its 12-channel digital mixer function, supports a broad range of applications, serving as the core of a music production studio. You can set the input source and output destination for various signals and use the mixer function not only from the mLAN8P of the mLAN8P, but also from a computer by using the included mLAN Tools. NOTE The mLAN8P mixer section features Direct mode and Mixer mode. When the mLAN Mixer is not being used, the unit is in Direct mode, in which signals are input and output directly. When the mLAN Mixer is being used, the unit enters Mixer mo...