Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
) + --+LEFT AC INPUT ~230/115V 50/60Hz VOLTAGE SELECT GND TAPE 115V AC 115V INPUT FUSE 250V/T5A AC 230V INPUT FUSE 250V/T2.5A 1.MIC #3 INPUT jack -1/4 inch inputs for microphones. AUDIO/VIDEO INPUT jacks 2.VIDEO INPUT jacks (VCD,TAPE and DVD) -VIDEO RCA inputs for these three source inputs. 3.AUDIO INPUT jacks (VCD,TAPE and DVD) -Each columm consists of a complete set of AUDIO LEFT & AUDIO RIGHT RCA inputs. R -AUDIO RIGHT RCA input. Connect to the audio right output from an external component. L -AUDIO LEFT RCA input. Connect to the audio left output from an external component. 4.AUDIO OUTPUT jacks- R -AUDIO RIGHT RCA output. Connect to the audio right input on an external component. L -AUDIO LEFT RCA output. Connect to the audio left input on an external component. 5.VIDEO OUTPUT jacks-VIDEO RCA output. Connect to the video input on an external component like TV or monitor. 6.AUDIO LINE OUTPUT jacks- AUDIO RCA outputs provide line audio signal to other external component like another amplifier. 7.SUB WOOFER LINE OUTPUT jacks- AUDIO RCA outputs provide line audio signal to other external sub woofer component. 8.SPEAKER SYSTEM - One set of banana connector ports provide audio output to stereo external speakers. Banana connector ports designed to be used with bare speaker wire as well as banana connectors. The LEFT and RIGHT outputs each consist of a positive (+, red) and negative (-, black) signal that correspond with the inputs on each speaker. (Please see connection diagram on page 8 for proper configuration) 9.POWER FUSE-Replaceable 250V/T10A fuse to protect the machine in 110V using condition. 10.AC inlet -Male inlet for power cable. 11.AC 115/230V SELECT - Voltage selection switch. Push the switch right for 115V, and left for 230V. (Note: different regions of the world use different voltage strengths. Please check to make sure the correct voltage is selected for your area.) 16.COMPONENT VIDEO OUTPUT jacks -RED, GREEN, BLUE component video RCA outputs. Connect to the red, green and blue component video inputs, respectively, on an external component. 17.COMPONENT VIDOE INPUT jacks(from BGM and DVD input) -RED, GREEN, BLUE component video RCA inputs. Connect to the red, green and blue component video outputs, respectively, from an external component. 6 Remote Control: 1 2 3 4 1.Manual Input Source Selection: 1.VCD button -Selects the external source connected to the VCD INPUT. 2.TAPE button -Selects the external source connected to the TAPE INPUT. connected to the AUX INPUT. connected to the DVDINPUT. 2.DYNAMIC ON/OFF buttons enhancement on or off. 3.DYNAMIC ON/OFF buttons of off. 4.MIC VOL +/- buttons the microphone master output volume. 5.MUSIC LOUDNESS ON/OFF buttons music enhancement on or off. 6.MUSIC VOL +/- buttons decrease the music output volume. 5 6 VOL + VOL VOL + MUTE MIC VOL MUSIC AM-145 DYNAMIC LOUDNESS TAPE DVD AUXVCD cesonic -Turns 3.AUX button -Selects the external source 4.DVD button -Selects the external source -Turns sound(including music and microphone vocal) -Turns sound on - Increase or decrease - Increase or 7 Player Connections Make sure all power is disconnected from each component before connecting. Plug all cables and cords securely to prevent unwanted noise. RIGHT BOX LEFT BOX DVD 1 2 3 4 5 10+ 20+6 7 8 9 0 R TAPE 1 2 3 4 5 10+ 20+6 7 8 9 0 R VCD L R WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTORE RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION KARAOKE AMPLIFIER MODEL:AM-145 INPUT:AC115V-230V S/N CITY OF INDUSTRY,CA,USA acesonic.com cesonicMIC 3 INPUT VCD VCD VIDEO INPUT AUDIO INPUT L R DVDTAPE AUDIO OUT DVD VIDEO OUT OUTPUT LINE SUB RIGHT SPEAKER SYSTEM(4-8.) + --+LEFT AC INPUT ~230/115V 50/60Hz VOLTAGE SELECT GND TAPE 115V AC 115V INPUT FUSE 250V/T5A AC 230V INPUT FUSE 250V/T2.5A 8 Troubleshooting If you are having problems operating the AM-145, or suspect something is wrong with the unit, please check the troubleshoot list below to see if the issue is a result of incorrect operation rather than equipment malfunction. If you are still unable to resolve the problem, please contact our Acesonic tech. service center at 626-820-0670. Symptom Possible Causes Solution Will not turn on No audio can be heard, audio signal meter shows signalAC power adapter cord is incorrectly attached or not plugged into outlet Incorrect input source selected MUSIC VOL control is down Check both the AC adapter connection as well as the AC outlet connection. Check the fuse below the AC adapter and see if it is broken. Check to make sure the correct corresponding button is pressed on the input selector in relation to your audio source. Check to see if MUSIC VOL control is all the way down. If so, turn the knob slowly clockwise. Poor or incorrect output Double check all output connections to speakers or other units. Try using another set of cables/cords. Make sure to turn POWER OFF before reconnecting cables. external units, or bad/defective cables, wires...