Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
1 Press TEST. You will hear the test tone from each speaker in sequence. 2 From your listening position, use the remote to adjust the volume of each speaker so that the test tone can be heard at the same level from all speakers. A Press FRONT BAL L or R to adjust the balance between the front left and right speakers (±8 dB, 0.5 dB/steps). During this adjustment, the test tone is emitted from both speakers simultaneously. B Press REAR BAL L or R to adjust the balance between the rear left and right speakers (±8 dB, 0.5 dB/steps). During this adjustment, the test tone is emitted from both speakers simultaneously. C Press CENTER + or – to adjust the level of centre speaker (0.5 dB/steps). During this adjustment, the test tone is emitted from the centre speaker. D Press REAR + or – to adjust the level of rear speakers (0.5 dB/steps). During this adjustment, the test tone is emitted from both speakers simultaneously. 3 Press TEST to turn off the test tone. (continued) 9GB Getting Started Getting Started z To adjust the volume of all the speakers at one time Use MASTER VOLUME on the processor, remote, or your multichannel processor. When using an amplifier with 5.1 ch inputs, set this unit’s MASTER VOLUME to –20 dB (near the centre position) and adjust the amplifier’s volume control. z To set the test tone to a specific channel Set the menu mode to EXPAND and use the test tone parameter in the LEVEL ADJUST menu to select the channel you desire. For details about the menu mode, see page 15. For details about the test tone parameter, see page 15. Notes • The front balance, rear balance, centre level, and rear level are shown in the display during adjustment. • Although these adjustments can also be made with the LEVEL ADJUST menu using the knobs on the front panel, we recommend you follow the procedure described above and adjust the speaker levels from your listening position using the remote control. 10GB Processor Operations Processor Operations Selecting a Component To listen to or watch a connected component, first select the function on the processor or with the remote. Before you begin, make sure you have: • Connected all components securely and correctly as indicated on pages 4 to 7. • Turned MASTER VOLUME to –20 dB (near the centre position) (when using an amplifier with 5.1 ch inputs). • Turned MASTER VOLUME to –. dB (when using separate amplifiers for each speaker). 3 When connected to an amplifier with 5.1 ch inputs, turn on your amplifier, select the respective component, then select the 5.1 channel input. EXAMPLE: Turn FUNCTION to select “LD”, then press 5.1 INPUT (for Sony TA-VA8ES). At this time, set the MASTER VOLUME control on your amplifier to “0”. 4 Turn on the source component, the LD player for example, and start playback. 5 Use the MASTER VOLUME on your amplifier to adjust the volume. U INPUT buttons MASTER VOLUME To Do this 1 Press U(POWER) to turn on the processor. 2 Press an INPUT button to select the component you want to use: To listen to or watch Press An LD player connected to the AC-3 RF AC-3 RF INPUT jack The component connected to the DIGITAL 1, 2, or 3 DIGITAL 1, 2, or 3 optical input jack.* The component connected to the DIGITAL 4 DIGITAL 4 coaxial input jack. The component connected to the BYPASS** BYPASS input jacks. * This unit’s digital inputs detect MPEG, Dolby Digital (AC-3), or PCM signals automatically. (The AC-3 RF input terminal for use with LD players is for Dolby Digital (AC-3) signals only.) ** • The menu functions may not be available when the unit is set to the “BYPASS ON” mode. • If you connected an additional audio amplifier (etc.) to the BYPASS IN jacks on the processor as described on page 6, use the function selector on that component to select the component you want to listen to (“CD” for example). • This unit switches to the “BYPASS ON” mode while its POWER is set to off. Mute the sound Press MUTING on the remote. Press again to restore the sound Reinforce the bass Press BASS BOOST to turn on the B.BOOST indicator. Turn off the display Press DISPLAY on the remote. Adjust the level of the sub woofer* Press the SUB WOOFER +/– on the remote. * In order to take full advantage of the MPEG/Dolby Digital (AC-3) bass redirection circuitry, we recommend setting the sub woofer’s cut off frequency as high as possible. (However, when using an amplifier with 5.1 ch inputs, set the sub woofer’s cut off frequency to match the characteristics of the amplifier.) Using the remote Z The remote lets you operate the processor. EXAMPLE: To listen to a Dolby Digital (AC-3) encoded Laserdisc played back in INPUT SELECT BYPASS 1 Press U(POWER) on the front panel to turn on the processor. 2 Press INPUT SELECT < or > repeatedly to display the input for the component you want to use (or press BYPASS to display “BYPASS ON”). EXAMPLE: If you connected your LD player to the AC-3 RF INPUT, select “AC-3 RF”. 11GB Processor Operations Processor Operations z When you select DOLBY SURROUND S...
Эта инструкция также подходит к моделям:Музыкальные инструменты - SDP-EP90ES (681.45 kb)