Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Casio, модель AP-31

Производитель: Casio
Размер: 1.6 mb
Название файла:
Язык инструкции:enes
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Modulation Depth = 00H to 7FH Portamento Time Format Byte 1 Byte 2 Byte 3 BnH 05H vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Portamento Time = 00H to 7FH Data Entry Format Byte 1 Byte 2 Byte 3 BnH 06H mmH (Data Entry MSB) BnH 26H llH (Data Entry LSB) n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) mm .. Data entry MSB value for the parameter that is selected by RPN and NRPN ll ....... Data entry LSB value for the parameter that is selected by RPN and NRPN 427B-E-066B 03.10.22, 4:23 PM Adobe PageMaker 6.5J/PPC Channel Volume Format Byte 1 Byte 2 Byte 3 BnH 07H vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Volume = 00H to 7FH Pan Format Byte 1 Byte 2 Byte 3 BnH 0AH vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Pan = 00H (left) to 40H (center) to 7FH (right) Expression Controller Format Byte 1 Byte 2 Byte 3 BnH 0BH vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Expression = 00H to 7FH Hold 1 (Damper Pedal) Format Byte 1 Byte 2 Byte 3 BnH 40H vvH Recognition n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Hold 1 = 00H to 7FH (00H to 3FH:OFF, 40H to 7FH:ON) Send n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Hold 1 = 00H,7FH(00H:OFF, 7FH:ON) Portamento Format Byte 1 Byte 2 Byte 3 BnH 41H vvH Recognition n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Portamento = 00H to 7FH (00H to 3FH:OFF, 40H to 7FH:ON) 427B-E-067B AP31/33_E_MIDI Data.p65 Page 3 Sostenuto Format Byte 1 Byte 2 Byte 3 BnH 42H vvH Recognition n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Sostenuto = 00H to 7FH (00H to 3FH:OFF, 40H to 7FH:ON) Send n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Sostenuto = 00H, 7FH (00H:OFF, 7FH:ON) Soft Format Byte 1 Byte 2 Byte 3 BnH 43H vvH Recognition n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Soft = 00H to 7FH (00H to 3FH:OFF, 40H to 7FH:ON) Send n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Soft = 00H, 7FH(00H:OFF, 7FH:ON) Resonance Format Byte 1 Byte 2 Byte 3 BnH 47H vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Filter Resonance = 00H to 7FH Release Time Format Byte 1 Byte 2 Byte 3 BnH 48H vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... AMP Release Time = 00H to 7FH Attack Time Format Byte 1 Byte 2 Byte 3 BnH 49H vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... AMP Attack Time = 00H to 7FH A-3 03.10.22, 4:23 PM Adobe PageMaker 6.5J/PPC Brightness Format Byte 1 Byte 2 Byte 3 BnH 4AH vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Filter Cutoff Frequency = 00H to 7FH Portamento Control Format Byte 1 Byte 2 Byte 3 BnH 54H kkH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) kk .... Source Note Number = 00H to 7FH Effect 1 Depth (Reverb Send Level) Format Byte 1 Byte 2 Byte 3 BnH 5BH vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Reverb Send Level = 00H to 7FH Effect 3 Depth (Chorus Send Level) Format Byte 1 Byte 2 Byte 3 BnH 5DH vvH n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) vv .... Chorus Send Level = 00H to 7FH NRPN (Non-Registered Parameter Numbers) With the instrument, NRPN are defined as tone editing parameters and drawbar parameters. The MSB and LSB of an NRPN specify the parameter being controlled, while the specified parameter’s value is set in accordance with the subsequent data entry. The following table shows the relationship between parameters and NRPN as defined by the instrument. NRPN MSB NRPN LSB Parameter 01H 08H Vibrato Rate 01H 09H Vibrato Depth 01H 0AH Vibrato Delay 01H 20H TVF Cut Off Frequency 01H 21H TVF Resonance 01H 63H TVF/TVA Envelope Attack Time 01H 64H TVF/TVA Envelope Decay Time 01H 66H TVF/TVA Envelope Release Time See “Vibrato Rate” through “TVF/TVA Envelope Release Time” for the data entry MSB value range and other details. A-4 AP31/33_E_MIDI Data.p65 Page 4 Format Byte 1 Byte 2 Byte 3 BnH 63H pmH (MSB) BnH 62H plH (LSB) n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16) pm ... MSB of NRPN pl ..... LSB of NRPN Recognition • NRPN messages not defined by the instrument can also be received, but subsequent data entry values after undefined NRPN messages are ignored. • After the NRPN MSB and LSB are received and the applicable control parameters settings are made, the value is set by receipt of the MSB of the subsequent data entry. The data entry LSB is ignored. V ibrato Rate NRPN MSB = 01H NRPN LSB = 08H Data Entry MSB = mmH mm .. Vibrato Rate = 00H to 40H to 7FH (-64 to 0 to +63) Recognition When the instrument receives this message, the preset Vibrato Rate value for the tone is changed to the Vibrato Rate value that corresponds to the data entry MSB of the received message. There is no change when the value of the data entry MSB is 40H(0). V i brato Depth NRPN MSB = 01H NRPN LSB ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории