Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
2Play a chord and the rhythm pattern starts to play automatically. NOTE • If the MODE button is set to Normal, only the rhythm plays (without a chord) when you play on the accompaniment keyboard. • If you press the INTRO/ENDING button 1 or 2 before playing anything on the keyboard, the rhythm starts automatically with an intro pattern when you play something on the accompaniment keyboard. • To cancel synchro start standby, press the SYNCHRO/ FILL-IN NEXT button one more time. Finishing with an Ending Pattern You can end your performances with an ending pattern that brings the rhythm pattern you are using to a natural-sounding conclusion. The following procedure describes how to insert an ending pattern. Note that the actual ending pattern played depends on the rhythm pattern you are using. T o finish with an ending pattern 1While the rhythm is playing, press INTRO/ENDING button 1 or 2. • The timing when the ending pattern starts depends on when you press the INTRO/ENDING button 1 or 2. If you press the button before the second beat of the current measure, the ending pattern starts playing immediately. NOTE • Pressing the INTRO/ENDING button prior to the first half beat at the beginning of a measure plays the ending immediately. Pressing the button after the first half beat of a measure causes the ending to be played from the beginning of the following measure. SYNCHRO/FILL-IN NEXT AUTO HARMONIZEINTRO/ENDING 1/2 ONE TOUCH PRESETMODE E-44 735A-E-046B WK3000_e_38-46.p65 44 04.3.26, 0:11 PM Auto Accompaniment Using One-touch Preset One-touch preset automatically makes the main settings listed below in accordance with the rhythm pattern you are using. • Keyboard tone • Layer on/off • Split on/off • Auto Harmonize on/off • Auto Harmonize type • Accompaniment volume level • Tempo • Effect settings To use one-touch preset 1 Select the rhythm you want to use. 2 Use the MODE button to select the accompaniment mode you want to use. 3 Press the ONE TOUCH PRESET button. • This automatically makes the one-touch preset settings in accordance with the rhythm you selected. • The keyboard automatically enters synchro standby at this time. 4 Start rhythm and Auto Accompaniment, and play something on the keyboard. • Accompaniment is played using the one-touch preset settings. Using Auto Harmonize When you are using Auto Accompaniment, Auto Harmonize automatically adds additional notes to your melody in accordance with the chord that is being played. The result is a harmony effect that makes your melody line richer and fuller. To use Auto Harmonize 1 Use the MODE button to select FINGERED or CASIO CHORD as the accompaniment mode. • The currently selected accompaniment mode is the one whose lamp is lit. See “About the MODE Button” on page E-38 for details. Normal (Auto Accompaniment off) FULL RANGE CHORD FINGERED CASIO CHORD 2 Press AUTO HARMONIZE button to turn on Auto Harmonize. • This causes the AUTO HARMONIZE indicator to appear on the display. 3 Start Auto Accompaniment play, and play something on the keyboard. 4 To turn off Auto Harmonize, press AUTO HARMONIZE button once. • This causes the AUTO HARMONIZE indicator to disappear. NOTE • Auto Harmonize turns off temporarily whenever you start demo tune play. It turns back on as soon as the operation or function that caused it to turn off is finished. • Auto Harmonize is enabled only when the Auto Accompaniment mode is FINGERED or CASIO CHORD. 735A-E-047B E-45 WK3000_e_38-46.p65 45 04.3.26, 0:11 PM Auto Accompaniment Auto Harmonize Types Auto Harmonize lets you select from among the 10 Auto Harmonize types. Type changing is performed by the setting item using the TRANSPOSE/FUNCTION button. See “Changing Other Settings” on page E-79 for more information. About Auto Harmonize notes and tones The notes you play on the keyboard are called “melody notes”, while the notes added to the melody by Auto Harmonize is called the “harmonize notes”. Auto Harmonize normally uses the tone you selected for the melody notes as the tone for the harmonize notes, but you can use the Mixer (page E-47) to specify a different tone for the harmonize notes. The harmonize note tone is assigned to Mixer Channel 5, so change Channel 5 to the tone you want to use for the harmonize notes. In addition to the tone, you can also use the Mixer to change a number of other parameters, such as volume balance. See “Using the Parameter Edit Mode” on page E-48 for details on these procedures. NOTE • The default harmonize note tone when you first turn on Auto Harmonize is the same tone as the melody note tone. • Changing the melody tone setting automatically changes the harmonize note tone to the same setting. Adjusting the Accompaniment Volume You can adjust the volume of the accompaniment parts as a value in the range of 000 (minimum) to 127 (maximum). 1Press the ACCOMP VOLUME button. 2Use the number buttons or the [+]/[–] buttons to change the current volume setting value. Example: 110 NOTE • Pressing the ACCOMP V...
Эта инструкция также подходит к моделям:Музыкальные инструменты - WK-3000 (6.33 mb)
Музыкальные инструменты - WK-3500 (6.33 mb)