Оценок - 3, средний балл: 4.7
(
)
)
|
Фото и характеристики Casio PX-750 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• When a GRAND PIANO tone (CONCERT/ MODERN/CLASSIC/MELLOW/BRIGHT) is selected as the tone, pressing this pedal will cause notes to reverberate (with damper resonance) just like the damper pedal on an acoustic grand piano. Half-pedal operation (pressing the pedal part way) is also supported. • Soft Pedal Pressing this pedal while playing suppresses notes played on the keyboard after the pedal was pressed, and makes them sound softer. • Sostenuto Pedal Only the notes of the keys that are depressed when this pedal is pressed are sustained until the pedal is released. English E-11 Playing with Different Tones Using the Metronome 1. Press the METRONOME button. • This starts the metronome. • The lamp above the SONG a button flash in time with the metronome beat. 2. To change the beat, hold down the FUNCTION button as you press one of the METRONOME BEAT keys to select a beat setting. • You can specify beats per measure value of 0, 2, 3, 4, 5, or 6. Specifying 0 as the setting plays a straight click, without any chime. This setting lets you practice with a steady beat. 3. While holding down the FUNCTION button, use the TEMPO keys to specify a tempo value in the range of 20 to 255 beats per minute. 4. Press the METRONOME button or SONG a button to turn off the metronome. NOTE • To return the tempo setting to the default tempo of the currently selected Music Library tune, press the + and – keys at the same time in step 3. Pressing + and – while recording will return the tempo value to 120. To adjust the metronome volume You can perform the following procedure at any time, regardless of whether or not the metronome is sounding. 1. While holding down the FUNCTION button, use the METRONOME VOLUME keys to specify a volume value in the range of 0 to 42. • For details about using the keyboard keys for settings, see “Keyboard Keys Used for Configuring Settings” on page E-21. • Each press of the .. or .. key raises or lowers the metronome volume value by 1. NOTE • To return to the initial default setting, press .. and .. at the same time. •Each press of the + or – key raises or lowers the tempo value by 1. •You can use the value input keys (0 to 9) to enter a specific three-digit. Be sure to input all three digits. Example:To enter “96”, press keys 0, 9, 6. E-12 Playing with Different Tones Playing a Piano Duet You can use the Duet Mode to split the piano’s keyboard in the center so two people can play a duet. The left and right side keyboards have virtually the same range. The left pedal operates as the left side damper pedal, while the right pedal is the right side damper pedal. This makes it possible to configure the keyboard so, for example, the teacher can play on the left and the student can follow along on the right. Or one person can play the left hand part on the left, while another plays the right hand part on the right. Keyboard Split point C3 C4 C5 C6 C3 C4 C5 C6 Left keyboard Right keyboard (middle C) (middle C) Pedal Operation when Playing a Duet Left side damper pedal Right side damper pedal (Half-pedal operation supported) Left and right side damper pedal NOTE • Only the damper pedal for the right side keyboard supports half-pedal operations. 1. Select the piano tone you want to use for the duet. Example: GRAND PIANO (MODERN) 2. While holding down the FUNCTION button, press the METRONOME button to toggle duet on and off. IMPORTANT! • You cannot use the Duet Mode while recording (page E-16). Changing the Octaves of the duet keyboards You can change the ranges of the left and right keyboards in octave units from their initial default settings. This comes in handy, for example, if the initial default range is not enough when one person is playing the left hand part and another person is playing the right hand part. 1. While holding down the FUNCTION and METRONOME buttons, press the keyboard C key that you want located at C4 (middle C) of the left keyboard. C4 C5 C6 C7 C3 C4 C5 C6 Left keyboard Right keyboard Example: Press the keyboard key of the leftmost C (C4) will assign the range shown below. (Pressed key) 1 octave higher than initial Unchanged setting 2. While holding down the FUNCTION and METRONOME buttons, press the keyboard C key that you want located at C4 (middle C) of the right keyboard. NOTE • You can return the keyboards to their initial default ranges by exiting and then re-entering the Duet Mode. English E-13 Playing Back Built-in Songs Your digital piano comes with a Music Library of 60 built-in tunes. You can play all 60 tunes in sequence, from beginning to end. IMPORTANT! • After you select a built-in song, it can take a number of seconds for the song data to be loaded. While the data is being loaded, the keyboard keys and button operations will be disabled. If you are playing something on the keyboard, the following operation will cause output to stop. 1. While holding down the FUNCTION button, press the SONG a button. • This will start repeat demo playback of the built-in songs in sequence, f...