Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
E-16 413A-E-018A Learning to Play the Built-in Tunes Playing a Built-in T une Your piano comes with 25 Music Library tunes built in. See the Song List on page A-2 of this manual for more information. 1 Press the SONG button so SONG indicator lamp (below the button) is lit. • Each press of the button toggles between the upper indicator lamp and lower indicator lamp. 2 While holding down the CONTROL button, press the keyboard keys shown below to input a tune number. 1 4 6 9 0 2 3 5 7 8 ^ ^ ^ ^ ^ ^ ^ ^ C1 C2 C3 C4 C5 C6 C7 C8 • To select tune number 5, for example, press the 0 key and then the 5 key. Always input two digits for the tune number. 3 4 Press the PLAY/STOP button. • This starts the playback of the tune. Press the PLAY/STOP button again to stop tune playback. NOTE • You can also cycle through the available tunes in step 2 by holding down the CONTROL button and pressing the RHYTHM/SONG SELECT [ ] or [ ] button. Practicing a Built-in T une You can turn off the left hand part or right hand part of a built-in tune and play along on the piano. PREPARATION • Select the tune you want to practice and adjust the tempo. If you are playing a tune for the first time, a slow tempo is probably best. 1 2 3 4 Use the TRACK 1/L TRACK 2/R button to turn parts on or off. . The indicator lamps above the button show the current on/off status of the parts. • To turn off the left hand part, the TRACK 1/ L indicator lamp should be unlit. • To turn off the right hand part, the TRACK 2/ R indicator lamp should be unlit. Press the PLAY/STOP button. • This starts playback of the tune, without the part you selected in step 1. Play the missing part on the piano’s keyboard. Press the PLAY/STOP button again to stop song playback. E-17 TRACK 1/L TRACK 2/R CONTROL PLAY/ STOP SONG RHYTHM/SONG SELECT 413A-E-019A Recording to and Playing Back from Song Memory You can store the notes you play in Song Memory for later playback. Tracks The song memory of this piano records and plays back notes much like a standard tape recorder. There are two tracks, each of which can be recorded separately. Besides notes, each track can be assigned its own tone number. During playback you can adjust the tempo to change the speed of playback. Start End Auto Accompaniment Track 1 (rhythm, bass, chords), melody Track 2 Melody Data recorded in track Song Memory Capacity • You can store a total of up to about 5,200 notes (Track 1 + Track 2) in Song Memory. • Recording stops automatically if the number of notes in Song Memory exceeds the maximum while you are recording. This is indicated by the SONG MEMORY indicator lamp turning on. Other Song Memory Data The following data is included when recording to Song Memory: selected tone, tempo and beat settings, pedal operations, reverb and chorus settings, selected rhythm (Track 1 only). Recorded Data Storage This digital piano has a lithium battery to supply power to retain memory contents even while power is off.* The life of the lithium battery is five years after the date of manufacture of the digital piano. Be sure to contact your CASIO service provider about having the lithium battery replaced every five years. * Never turn off piano power while a recor d operation is in progress. IMPORTANT! • If the data recorded in a single track uses up all the available Song Memory capacity, you will not be able to record anything in the other track. • Recording new data to a track automatically deletes any data previously stored in that track. • Turning off power while a record operation is in progress deletes anything recorded up to that point. • CASIO shall not be held responsible for any losses by you or any third party due to loss of data caused by malfunction or repair of this digital piano, or by battery replacement. SONG MEMORY Button Operation Each press of the SONG MEMORY button cycles through the functions shown below. Playback Standby Record Standby Normal Lit Flash Unlit E-18 SYNCHRO/ FILL-IN INTRO/ ENDING SONG MEMORY START/ STOP METRONOME TRACK 1/L TRACK 2/R 413A-E-020A Recording to and Playing Back from Song Memory Recording Your Keyboard Play You can record to either track with or without playback of the other track. To record to one track without playing back the other Press the SONG MEMORY button twice so the SONG MEMORY indicator lamp is flashing. • At this time the TRACK 1/L indicator lamp should also be flashing. This indicates that the piano is standing by for recording to Track 1. • If you want to record to Track 2, press the TRACK 1/L TRACK 2/R button here. This will cause the TRACK 2/R indicator lamp to flash, which indicates that the piano is standing by for recording to Track 2. NOTE • Select the tone and effects you want to use in your recording, and configure the tempo and beat settings. • If you want to use the metronome during recording, press the METRONOME button to start it. • If you want to use a rhythm and/or auto accompaniment during recording (to Track 1 only), select the rhythm and cho...