NOTE • The tune selection and playback stop operations described above are the only operations that are possible during demo tune play. The Music Library includes both built-in songs (01 to 60), plus one song (61) that have been saved to digital piano memory from a computer*. You can use the procedure below to select one of these songs and play it back. * You can download music data from the Internet and then transfer it from your computer to digital piano memory. See “Transferring Song Data with a Computer” on page E-25 for more information. 1. Find the song number of the song you want to play in the song list on page A-1. 2. To change to another song, hold down the FUNCTION button as you use the SONG SELECT keys to specify a song number. • Each press of the + or – key raises or lowers the song number by 1. • You can use the value input keys (0 to 9) to enter a specific two-digit song number. Be sure to input both digits. Example:To select song 08, enter 0 and then 8. RECORDER SONG aFUNCTION METRONOME Playing Back All of the Built-in Songs Playing Back a Specific Music Library Song E-13 Playing Back Built-in Songs 3. Press the SONG a button. • This starts the playback of the song. 4. To stop playback, press the SONG a button again. • Playback will stop automatically when the end of the song is reached. NOTE • Pressing the + and – keys at the same time will select song number 01. • You also can adjust the playback tempo and volume of the song. See “Configuring Settings with the Keyboard” on page E-19 for more information. Practicing with a Music Library Song You can turn off the left hand part or right hand part of a song and play along on the piano. NOTE • The Music Library includes a number of duets. While a duet is selected, you can turn off the first piano or second piano tone and play along with the song. PREPARATION • Select the song you want to practice and adjust the tempo. See “Configuring Settings with the Keyboard” on page E-19. • A number of tunes have tempo changes part way through in order to produce specific musical effects. 1. While holding down the FUNCTION button, press the RECORDER (L) button or METRONOME (R) button to select the part you want to turn off. • Pressing a button toggles its part on (button lamp on) and off (button lamp off). Both parts on Right hand part off Left hand part off Left hand Right hand 2. Press the SONG a button. • This starts playback, without the part you turned off in step 1. 3. Play the missing part on the keyboard. 4. To stop playback, press the SONG a button again. E-14 English Recording and Play Back You can store the notes you play in digital piano memory for later playback. A track is a container of recorded data, and a song consists of two tracks: Track 1 and Track 2. You can record each track separately and then combine them so they play back together as a single song. Memory Capacity • You can record approximately 5,000 notes in digital piano memory. •The RECORDER button lamp will flash at high speed when memory runs low. • Recording stops automatically if the number of notes in memory exceeds the maximum. Recorded Data • Keyboard play • Tone used • Pedal operations • Reverb and chorus settings (Track 1 only) • Tempo setting (Track 1 only) • Layer setting (Track 1 only) • Split setting (Track 1 only) • Temperament and base note settings (Track 1 only) • Octave shift setting (Track 1 only) Recording Data Storage • Starting a new recording deletes any data that was previously recorded in memory. • Should power fail during recording, all of the data in the track you are recording will be deleted. IMPORTANT! • CASIO COMPUTER CO., LTD. takes no responsibility for any damages, lost profits, or claims by third parties arising from the deletion of recorded data due to malfunction, repair, or for any other reason. Using the RECORDER Button Each press of the RECORDER button cycles through the recording options in the sequence shown below. RECORDER SONG aFUNCTION METRONOME Tracks Track 1 Record While playing back. . . Track 2 Record Song Lit Flashing Off Playback Standby Record Standby Normal English Recording and Play Back You can store the notes you play in digital piano memory for later playback. A track is a container of recorded data, and a song consists of two tracks: Track 1 and Track 2. You can record each track separately and then combine them so they play back together as a single song. Memory Capacity • You can record approximately 5,000 notes in digital piano memory. •The RECORDER button lamp will flash at high speed when memory runs low. • Recording stops automatically if the number of notes in memory exceeds the maximum. Recorded Data • Keyboard play • Tone used • Pedal operations • Reverb and chorus settings (Track 1 only) • Tempo setting (Track 1 only) • Layer setting (Track 1 only) • Split setting (Track 1 only) • Temperament and base note settings (Track 1 only) • Octave shift setting (Track 1 only) Recording Data Storage • St...
)
