Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
* Be sure to use a connecting cord that has a stereo mini plug on the end you connect to the keyboard, and a connector that provides dual channel (left and right) input to the amplifier to which you are connecting. The wrong type of connector at either end can cause one of the stereo channels to be lost. When connecting to a musical instrument amplifier, set the volume of the keyboard to a relatively low level and make output volume adjustments using the amplifier’s controls. [Connection Example] PIN plug (red) PIN jack To keyboard’s PHONES/ OUTPUT terminal INPUT 1 INPUT 2 Stereo mini PIN plug Standard Keyboard or plug (white) plug guitar amp .NOTE • You can also connect the keyboard ’s MIDI terminal to a computer or sequencer. See “Using MIDI” on page E-25 for details. Accessories and Options Use only the accessories and options specified for this keyboard. Use of non-authorized items creates the danger of fire, electric shock, and personal injury. E-12 274B-E-014A MA150_e_08-14.p65 Page 12 03.10.8, 10:45 AM Adobe PageMaker 6.5J/PPC Playing the Keyboard 1. Set the POWER switch to “ON” to turn on power. 2. Use the VOLUME buttons to adjust the volume level. • Press [] to raise the volume and [] to lower it. • The “MAIN” (main volume) value on the display indicates the current volume level. • You can set the main volume to one of 11 levels, from 0 to 10. Playing the Demo Tunes 1. Press the DEMO button. This starts playback of the demo tunes in sequence, starting from the currently selected tune. • Press the DEMO button again to stop demo tune play. 3. Now try playing something on the keyboard. C D E F G A B (H) C C2 C3 C4 C5 C6 .NOTE Note Names A value next to a note name indicates the relative position of the note on the keyboard as shown below. 274B-E-015A E-13 MA150_e_08-14.p65 Page 13 03.10.8, 10:45 AM Adobe PageMaker 6.5J/PPC Selecting a Tone You can select from among 50 built-in tones. A tone list on the console shows the names and numbers of all the tones. 1. Press the TONE button. • This causes “TONE” to appear on the display, along with the number of the currently selected tone. 2. Find the tone you want in the tone list, and then use the number buttons to input its two-digit number. • To select “06 MARIMBA”, for example, press [0] then [6]. • You can also use the + (higher) and – (lower) buttons to change the displayed tone number. 3. After selecting the tone, play something on the keyboard to hear what it sounds like. .NOTE • The initial power on default tone setting is “00 GRAND PIANO”. • This keyboard has 8-note polyphony, which means it can play up to eight notes at the same time. • When tone “49 PERCUSSION” is selected, keyboard keys are assigned the percussion sounds shown in the illustration below. Keyboard Key C3 D3 E3 F3 G3 A3 B3 C4 Name BASS DRUM 1 BASS DRUM 2 ACOUSTIC SNARE 1 ACOUSTIC SNARE 2 TAMBOURINE CLOSED HI-HAT OPEN HI-HAT HIGH TOM — Keyboard Key D4 E4 F4 G4 A4 B4 C5 D5 Name LOW TOM CLAVES RIDE CYMBAL HIGH CONGA LOW CONGA HIGH AGOGO LOW AGOGO MUTE TRIANGLE — Percussion Pad Percussion Pad E-14 274B-E-016A MA150_e_08-14.p65 Page 14 03.10.8, 10:45 AM Adobe PageMaker 6.5J/PPC Selecting a Rhythm You can select from among 30 rhythms. See the rhythm list at the end of this manual (page A-1) for information about what rhythms ar e available. 1. Press the RHYTHM button. • This causes “RHYTHM” to appear on the display, along with the number of the currently selected rhythm. 2. Find the rhythm you want in the “Rhythm List” on page A-1, and then use the number buttons to input its two-digit number. • To select “02 DANCE”, for example, press [0] then [2]. • You can also use the + (higher) and – (lower) buttons to change the displayed rhythm number. 3. Press the START/STOP button to start the currently selected rhythm. 4. Use the [] and [] TEMPO buttons to adjust the speed of the rhythm. • You can set the tempo value in the range of 40 to 240. • To return the tempo setting to the initial default value for the selected rhythm, press the [] and [] TEMPO buttons at the same time. 5. Press the START/STOP button again to stop rhythm play. Initial Default Tempo Settings The following are the rules that govern the initial default tempo settings of built-in rhythms. • Each rhythm has an initial default tempo setting that best matches the rhythm. • Changing the selected rhythm while rhythm play is stopped automatically changes the tempo setting to initial default for the newly selected rhythm. • Changing the selected rhythm while rhythm is playing changes the rhythm without changing the tempo setting. If One-Touch Preset is turned on (page E-19), the tempo setting is always changed with selection of a different rhythm, regardless of whether the rhythm is playing or not. 274B-E-017A E-15 MA150_e_15-22.p65 Page 15 03.10.8, 10:45 AM Adobe PageMaker 6.5J/PPC Using Auto Accompaniment The 19 keys (C2 through F3) on the far left of the keyboard are the “auto accompaniment keyboard”. Pressing the keys of the...