Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Музыкальные инструменты - LK-50 (63.16 kb)
Музыкальные инструменты - LK-50 (63.47 kb)
Музыкальные инструменты - LK-50 (10.49 mb)
Фрагмент инструкции
Because of this, the entire keyboard is a melody keyboard, regardless of the MODE switch setting. To record to Track 2 without playing back Track 1 1. Use the MEMORY button to enter record standby. 2. Press the LEFT/TRACK 1 button to turn off playback of Track 1. 3. Continue from step 1 under "To record to Track 2 while placing back Track 1." • Note that the above procedure does not turn off rhythm and Auto Accompaniment. Track 2 Contents After Real-time Recording The following data is recorded to Track 2 during real-time recording. • Tone number • Rhythm number • Pedal operations E-27 -e- -e- SYNCHRO/ENDING- INTRO- LEFT/TRACK 1 - RIGHT/TRACK 2 Number buttons MODE NORMAL/FILL-IN ■ START/STOP ■VARIATION/FILL-IN - STEP MEMORY -e- Recording Chords with Step Recording With step recording, you can record a chord progression in Track 1 chord-by-chord. You can then use the chord progression as an Auto Accompaniment or later add melody notes to Track 2. To record chords to Track 1 using step recording 1. Use the MEMORY button to enter record standby, and then use [+] and [-] to select 0 or 1 as the song number. iRec.No. 2. 3. Press the LEFT/TRACK 1 button to select Track 1. Press the STEP button. » GM MEMORY STEP—' 4. 5. 6. Make any of the following settings if you want. • Rhythm number (page E-16) • MODE switch (page E-16) Press the SYNCHRO/ENDING button. Play a chord. • Use the chord play method that is specified by the current MODE switch setting: FINGERED, CASIO CHORD, NORMAL. • When the MODE switch is set to NORMAL, specify the chord using the root input keyboard and chord type input keyboard. See "Specifying Chords in the Normal Mode" on this page for details. Measure number Beat number “ 48 clocks = lbeat 8. Input the length of the chord (how long it should be played until the next chord is played). • Use the number keys to specify the length of a chord. See "Specifying the Length of a Note" on page E-29 for details. • Repeat steps 6 and 7 to input all the chords you want. • If you make a mistake while step recording chords, use the procedure under "Editing Data While Step Recording" to make corrections. After you finish step recording, press the START/STOP, MEMORY, or STEP button. • This enters playback standby for the song you have just input. Pressing the START/STOP button plays it back. f NOTES f • You can use the FF and REW buttons to change the current input position during step recording. See “Editing Data While Step Recording” on page E-30 for details. • Pressing the [0] button in step 7 inputs a rest. Note, however, that any rests you input do not have any effect on Auto Accompaniment. Track 1 Contents After Step Recording In addition to chords, the following data is also recorded to Track 1 during step recording. • Tone number • Rhythm number (step 4) • INTRO, SYNCHRO/ENDING, NORMAL/FILL-IN, VARIATION/ FILL-IN button operations (step 6) Specifying Chords in the Normal Mode When the MODE switch is set to NORMAL during step recording, you can specify chords using a method that is different from CASIO Chord and Fingered fingerings. This chord specification method can be used to input 18 different chord types using only two keyboard keys, so chords can be specified even if you don't know how to actually play them. Root input keyboard - Chord specification -keyboard © Major Seventh flat five © Minor © Minor seventh flat five © Augmented Seventh suspended four © Diminished ® Diminished seventh © Suspended fourth Minor add ninth Seventh © Add ninth 7 Minor seventh ® Minor sixth ® Major seventh © Sixth ® Minor major seventh ® Six ninth -e- E-28 474A-E-030A ■e- Flash ■e- To specify a chord, hold down the key on the root input keyboard that specifies the root, and press the key in the chord type input keyboard to specify the chord type. When inputting a chord with a specified bass note, pressing two keys of the root input keyboard causes the lower note to be specified as a bass note. Example 1: To input Gm7, hold down G on the root input keyboard and press the m7 key on the chord type input keyboard. (G) Hold down key to specify chord root. (m7) Press key to specify chord type. Example 2: To input Gm/C, hold down C and G on the root input keyboard and press the m key on the chord type input keyboard. llllllllll (G^ (m) (C^ (G) Hold down keys to specify on bass and chord root. (m) Press key to specify chord type. Specifying the Length of a Note During step recording, the number buttons are used to specify the length of each note. • Note lengths Use number buttons [1] through [6] to specify whole notes (o), half notes (J), quarter notes (J), eighth notes (J)), 16th notes (J)), and 32nd notes (ji). Example: To specify a quarter note (J), press [3]. • Dots ( • ) and triplicates ( i—3—i ) While holding down the [7] (dot) or [9] (triplicate), use buttons [1] through [6] to input the lengths of the notes. Example...