Оценок - 4, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1. Hold down 9 until the beats per measure setting screen appears on the display. Bea t • If you do not perform any operation for a few seconds after the beats per measure setting screen appears, the display will return to the screen displayed before you pressed 9. 2. Use cl (10-key) to enter the number of beats per measure. • The bell will not sound if you specify 0 for this setting. In this case, all beats are indicated by a click sound. This setting lets you practice with a steady beat, without worrying how many beats there are in each measure. Changing the Metronome Tempo Use the following procedure to change the tempo of the metronome. 1. Press bq. Use w (slower) and q (faster) to change the tempo setting. Holding down either button changes the setting at high speed. • Pressing q and w at the same time will initialize the tempo setting in accordance with the currently selected song or rhythm. • Pressing bq causes the tempo value to flash on the display. While the tempo value is flashing, you can use cl (10-key) to change it. Note that you must input leading zeros, so 89 is input as 089. • The tempo value will stop flashing if you do not perform any operation for a short while. Tempo value (flashes) Changing the Metronome Sound Volume The metronome volume setting is changed automatically with the volume level of the currently selected Auto Accompaniment or song. The metronome volume cannot be adjusted independently. • For information about changing the Auto Accompaniment volume, see page E-39. • For information about changing the song volume, see page E-26. • You cannot adjust the balance between the metronome and note volume during Auto Accompaniment and built-in tune play. English E-11 Controlling the Keyboard Sounds Your Digital Piano lets you select tones for a wide variety of musical instrument sounds, including violin, flute, orchestra, and more. Even the same song sound takes on a different feel by changing the instrument type. 1. Press bt. 2. Use cl (10-key) to select the tone number you want. The corresponding tone number and tone name will appear on the screen. • See the separate “Appendix” for a complete list of available tones. • Use the number buttons to enter the tone number. Specify three digits for the tone number. Example: To select 001, enter 0 3 0 3 1. • When one of the drum sets is selected (tone numbers 654 through 670), each keyboard key is assigned a different percussion sound. 3. Try playing something on the keyboard. The tone of the instrument you selected will sound. 1. Press bs and bt at the same time. This selects the grand piano tone. Settings 7 bs bt csct cl Select from a variety of musical instrument sounds To select an instrument for playing S t . G r P n o Tone number Tone name Playing with a Piano Tone (Piano Setup) Tone Number : “001” Reverb : “06” Transpose : 00 Touch Response : Off: Returns to initial default On:No change Peda...
Эта инструкция также подходит к моделям:Синтезаторы/фортепиано - Keyboard CDP-200R (4.52 mb)