Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Turning the Power On/OFF Press the mixer’s power switch to the ON position. When you are ready to turn the power off, press the power switch to the STANDBY position. Note that trace current continues to flow while the switch is in the STANDBY position. If you do not plan CAUTION to use the mixer again for a long while, please be sure to unplug the adaptor from the wall outlet. Windows Vista Computer Windows-based computer with built-in USB interface OS Windows Vista CPU 1 GHz or higher Intel Core/Pentium/Celeron processor Memory 1 GB or more Windows XP Computer Windows-based computer with built-in USB interface OS Windows XP Professional/XP Home Edition CPU 750 MHz or higher Intel Core/Pentium/Celeron processor Memory 96 MB or more (128 MB or more recommended) Macintosh Computer Macintosh computer with built-in USB interface OS MacOS X 10.3.3 or higher CPU Macintosh G3 300 MHz or higher/Intel processor Memory 128 MB or more Cubase AI 4 System Require- ments Windows OS Windows XP Professional/XP Home Edition CPU 1.4 GHz or higher Intel Pentium processor Memory 512 MB or more Audio Interface Windows DirectX compatible Hard Disk 400 MB or more Macintosh OS MacOS X 10.4 or higher CPU Power Mac G4 1 GHz/Core Solo 1.5 GHz or higher Memory 512 MB or more Hard Disk 400 MB or more NOTE •A DVD driver is required for installation. •To activate your software license, install the application while the computer is connected to the internet. 6 MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual Mixer Basics MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual 7 Quick Guide This quick setup and operation guide covers everything from installing the Cubase AI 4 software to using Cubase AI 4 for recording and mixdown. While going through this section you might find it useful to also refer to the “Front and Rear Panels” section on page Mixer Basics MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual 7 Quick Guide This quick setup and operation guide covers everything from installing the Cubase AI 4 software to using Cubase AI 4 for recording and mixdown. While going through this section you might find it useful to also refer to the “Front and Rear Panels” section on page supplied with the Cubase AI 4 software. Since the End-User Software License Agreement (EUSLA) shown on your PC-display in your installing the “DAW” software is replaced by the agreement at the end of this manual, you should disregard the EUSLA. Read the Software License Agreement at the end of this man- ual carefully, and install the software if you agree to it. 1 Start the computer and log on to the Administrator account. 2 Insert the included DVD-ROM into the computer’s DVD-ROM drive. 3 Open the “Cubase AI 4 for Windows” folder and double-click on the “CubaseAI4.msi”. Follow the on-screen instructions to install the Cubase AI 4 software. • When installing Cubase AI 4, you will need a working internet connection to register your Cubase AI 4. Make sure to fill in all required fields for user registration. If you do not register the product, you will be unable to use the application after a limited period of time expires. •For a Macintosh computer, double-click the “CubaseAI4.mkpg” icon for installation. 1 Turn the power to the MG mixer and all gear that is to be connected to the MG mixer off/standby (except the computer), and set the channel faders, STEREO OUT Master fader, GROUP 1-2 fader and GROUP 3-4 fader to their minimum settings. 2 Connect the MG mixer to your computer using the supplied USB cable. When connecting or disconnecting the USB cable be sure to turn the 2TR IN/USB control all the way down. Disconnect the USB cable when using the MG mixer without the computer. Step 1 Installing Cubase AI 4 IMPORTANT ! NOTE Step 2 Connecting to the MG mixer Channel fader STEREO OUT Master fader GROUP 3-4 fader GROUP 1-2 fader USB Connection Precautions Be sure to observe the following points when connecting to the computer’s USB interface. Failure to observe these rules can result in computer freezes/ hang-ups and possibly data loss or corruption. If the MG mixer or computer does hang up, turn the power to both devices off and then on again, and restart the computer. • Be sure to wake the computer from sleep/sus- pended/standby mode before making a con- nection to the computer’s USB connector. • Connect the MG mixer to the computer before turning the MG mixer power on. •Always quit all applications running on the computer before turning the MG mixer’s power on or off, or connecting or disconnecting the USB cable. •Wait at least 6 seconds between turning the MG mixer on or off, and between connecting or disconnecting the USB cable. CAUTION CAUTION NOTE Quick Guide MG206C-USB/MG166CX-USB/MG166C-USB Owner’s Manual Mixer Basics 8 3 Connecting Microphones and/or Instruments. For details on making connections refer to the “Setup” section on page 15 and the “Front & Rear Panels” section on page 16. To prevent loud pops and noises, turn on the power to your sound gear starting wi...
Эта инструкция также подходит к моделям:Музыкальные инструменты - MG166CX-USB (2.05 mb)
Музыкальные инструменты - MG206C-USB (2.05 mb)