Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Note: For details on VCA functions, refer to page 38. S Channel fader This fader adjusts the signal output level of the stereo input channel. This fader will affect the level of the signal that is sent to the ST bus and to the MIX buses (if the PRE switch is off). If one or more VCA groups are selected by the VCA GROUP select switches (R), the signal output level of that channel will also be affected by the corresponding VCA master fader(s). T PFL (pre-fader listen) switch When this switch is on ( ), the indicator will light, and the pre-fader/post-EQ signal of this stereo input channel will be sent to the PFL bus, allowing it to be monitored from the MONITOR OUT jacks or the PHONES jack. Control panel 13 Variable/fixed select section The M3000A’s GA (Group/Aux) diversity function allows MIX buses 1–8 to function either as group buses or as AUX buses. In this section, you can switch each pair of MIX buses (1/2, 3/4, 5/6, 7/8) between functioning as group buses or as AUX buses. A Variable/fixed select switches These switches select whether the level of the signals sent from the input channels to MIX buses 1–8 will be fixed (FIX) or variable (VARIABLE). From top to bottom, these switch MIX buses 1/2, 3/4, 5/6 and 7/8. lWhen FIX ( ) is selected The corresponding pair of MIX buses (1/2, 3/4, 5/6, 7/ 8) will function as a group bus, and the signal of the MIX (FIX) bus will be output to the corresponding mix channel. In this case, the settings of the mix level controls M1–M8 (mono input channels J, stereo input channels 7) will have no effect. lWhen VARIABLE ( ) is selected The corresponding pair of MIX buses (1/2, 3/4, 5/6, 7/ 8) will function as an AUX bus, and the signal of the MIX (VARIABLE) bus will be output to the corresponding mix channel. In this case, the mix level controls M1–M8 (mono input channels J, stereo input channels 7) will take effect just as they are set. –15 +15 0 10 0 10 0 10 0 10 0 10 EQ PRE PRE M1 M2 M3 M4 M5 0 10 M6 0 10 M7 0 10 M8 VARIABLE FIX –15 +15 0 10 0 10 0 10 0 10 0 10 EQ PRE PRE M1 M2 M3 M4 M5 0 10 M6 0 10 M7 0 10 M8 –15 +15 0 10 0 10 0 10 0 10 0 10 EQ PRE PRE M1 M2 M3 M4 M5 0 10 M6 0 10 M7 0 10 M8 –15 +15 0 10 0 10 0 10 0 10 0 10 EQ PRE PRE M1 M2 M3 M4 M5 0 10 M6 0 10 M7 0 10 M8 1 (SUB)(ST) from INPUT MIX 3-4, 5-6, 7-8: Same as MIX 1-2 MIX 2: Same as MIX 1 to Meter VARIABLE FIX PFLAFL L R ON MAS AFL MAS (MIX) TO MATRIX CONTROL CHECK ON ON/EDIT MIX OUT 1 AFL PAN TO STEREO TO MATRIX MIX INSERT I/O ST L R L R MIX (FIX) MIX (VARIABLE) 1 3 5 7 1 2 3 4 5 6 7 8 2 4 6 8 9 11 13 15 10 12 14 16 from..Ctrl Master 1 3 5 7 2 4 6 8 9 11 13 15 10 12 14 16 L R L R Control panel Control panel Mix section The function of these switches and indicators will depend on the mode of the M3000A. These output channels control the signals of MIX buses 1–16. MIX buses 13/14 and 15/16 are controlled as stereo pairs respectively. The signal that passes through these output channels is output individually from the MIX OUT 1–16 jacks (page 27), and can also be sent to the MAS AFL bus, MAS PFL bus, ST bus, and the matrix. MIX 13/14MIX 11/12 MIX 15/16 MIX 13/14MIX 11/12 MIX 15/16 BAL TO STEREO TO MATRIX TO MATRIX TO STEREO L RPAN L R PAN L R AFLAFL ON/EDITON/EDIT CHECK ON CHECK ON 10 5 0 5 10 20 40 BAL TO STEREO TO MATRIX L R AFL ON/EDIT CHECK ON 10 5 0 5 10 20 40 10 5 0 5 10 20 40 MIX 9/10 MIX 9/10 TO MATRIX TO STEREO PAN L R PAN L R AFL ON/EDIT CHECK ON 10 5 0 5 10 20 40 MIX 7/8 MIX 7/8 TO MATRIX TO STEREO PAN L R PAN L R AFL ON/EDIT CHECK ON 10 5 0 5 10 20 40 MIX 5/6 MIX 5/6 TO MATRIX TO STEREO PAN L R PAN L R AFL ON/EDIT CHECK ON 10 5 0 5 10 20 40 MIX 3/4 MIX 3/4 TO MATRIX TO STEREO PAN L R PAN L R AFL ON/EDIT CHECK ON 10 5 0 5 10 20 40 MIX 1/2 MIX 1/2 TO MATRIX TO STEREO PAN L R PAN L R AFL ON/EDIT CHECK ON 10 5 0 5 10 20 40 A TO MATRIX switches When these switches are on ( ), the signal of the corresponding MIX OUT will be sent to the matrix. B PAN controls/BAL controls These controls specify the pan (MIX OUT 1–12) or left/right balance (MIX OUT 13–16) when the MIX OUT signal is sent to the ST bus. C TO STEREO switches When these switches are on ( ), the signal of the corresponding MIX OUT will be sent to the ST bus. l In normal mode The ON/EDIT switches will turn each MIX OUT on/ off. When on, the ON indicator will light. MIX OUTs which are turned off will send no signal to the MIX OUT 1–16 jacks, the MAS AFL bus, the ST bus or the matrix. However even in this case, you can turn on the AFL switch (6) to monitor the pre-fader signal from the MONITOR OUT jacks or the PHONE jack. A l In check mode B You can use the CHECK indicators to view the on/off status of each MIX OUT stored in a scene before you C actually recall the scene. In check mode, you can also use the ON/EDIT switches to change only the lit/dark status of the CHECK indicators. (The actual on/off setting will not be affected.) For details on check mode, refer to page 33. E Mix master faders These faders adjust the output level of MIX OUT 1– D 1...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M3000A-24 (621.46 kb)
Музыкальные инструменты - M3000A-40C (621.46 kb)
Музыкальные инструменты - M3000A-56C (621.46 kb)