Оценок - 3, средний балл: 3.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
EIMPORT (Import a CSV file) Input patch, output patch, and channel name data from CSV files written by the PM5D can be loaded into the PATCH LIST page by clicking this button. When you click this button, a dialog box will appear as shown at right, allowing you to specify the folder containing the CSV files you want to load. Specify the folder that contains CSV files, and click the OK button. If the specified folder contains CSV files, that data will be loaded into the PATCH LIST page. NOTE If the specified folder does not contain the necessary CSV file, the settings in the PATCH LIST page will not change. For example if the folder contains only an input patch CSV file, only the input patch settings of the PATCH LIST page will be loaded, and the remaining settings will not change. FEXPORT (Export a CSV file) By clicking this button, input patch, output patch, and channel name data can be written to a CSV file that can be loaded by the PM5D. When you click this button a dialog box will appear, allowing you to specify a folder for the exported CSV files. Specify the folder in which the CSV files will be saved, and click the OK button. Separate CSV files containing the input patch, output patch, and channel name data will be saved in the folder you specified. You can use a memory card to load these CSV files into the PM5D. PM5DV2/DSP5D Editor Owner’s Manual 44 Surround Editor window Surround Editor window 1 2 3 54 ASELECT (Channel selection) This area displays the name and number of the two channels selected for operations (two adjacent odd-numbered/ even-numbered input channels, a ST IN channel, or an FX RTN channel). To switch channels, use the SELECT button or the / buttons at left and right. You can also edit the channel name in the text box. BPAIR Indicates the pair status of the two selected channels. If an input channel is selected, you can click the heart symbol to enable/disable pairing. CLINK Specifies whether movement of the sound image will be linked for the two selected channels. If this button is on, the sound image of the two channels will be linked according to the link pattern you select using LINK PATTERN SELECT buttons 1–8. DLINK PATTERN SELECT These buttons select link patterns 1–8. The currently selected pattern is shown graphically at the left. ESURROUND MODE This indicates the currently selected surround mode. You can click this area to switch the mode. PM5DV2/DSP5D Editor Owner’s Manual 45 7 6 K J 8 9 7 6 K J 8 9 E These controls specify the proportion at which the signals are sent to each surround bus when the input channel is positioned in the center. The operable parameters will change as follows, according to the surround mode that is currently selected. • Surround mode= 3-1ch/5.1ch The Div knob will be operable, allowing you to adjust the front divergence. Use this knob to specify the proportion (0–100) at which a signal positioned in the center will be sent to the center bus (C) and the left/right buses (L, R). • Surround mode= 6.1ch The F knob and R knob will be operable, allowing you to adjust the front and rear divergence separately. Use these two knobs to specify the proportion (0–100) at which a signal positioned in the center will be sent to the center buses (C, Bs) and the left/right buses (L, R, Ls, Rs). In addition, a LINK button that links front and rear divergence is displayed between the F knob and R knob. If you turn the LINK button on, the value of the F knob will be copied to the R knob, and the two knobs will be linked. GLFE (Low Frequency Effect) Use the LFE knob to adjust the level of the signal sent from the input channel to the subwoofer LFE bus, over a range of –. to 0 dB. The ON/OFF button is an on/off switch for sending to the MIX bus assigned to the LFE channel. HSURROUND BUS ON (Surround bus on/off) These buttons are on/off switches for the signal sent from the currently selected input channel to the corresponding surround bus. You can click the surround bus name buttons at left to move the panning to the position of the corresponding surround bus. IPANNING buttons These buttons correspond to each surround bus. Speaker icons are displayed to indicate the surround buses that are available for the current surround mode. JGrid This specifies the surround panning for the currently selected input channel, relative to the mid-point of the speaker locations. The current setting is indicated by a symbol. You can drag this symbol up, down, left, or right to move the panning. KPAN POSITION The surround panning of the currently selected input channel is shown here as front/rear left/right coordinate values. PM5DV2/DSP5D Editor Owner’s Manual 46 In this window you can select the insertion destination of GEQ modules 1–20, and edit the parameters. The number of GEQ modules will depend on the “Number of Effects” setting specified in the Mixer Setup window. 2 3 6541 GEQ window In this window you can select the insertion destination of GEQ modules 1–20, and edit the paramet...
Эта инструкция также подходит к моделям:Музыкальные инструменты - PM5D (3.68 mb)
Музыкальные инструменты - PM5D-RH (3.68 mb)