Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
If the CD player, tuner, tape deck, etc. connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control transmitter will also control various functions of each component. YAMAHA HiFi SYSTEM REMOTE CONTROL TRANSMITTER MD VOLUME AUX – SLEEP TAPE TUNER CD PHONO POWER 13122 For Control of This Unit 1 SLEEP timer key This unit is automatically turned into the standby mode one hour after this key is pressed (so that SLEEP indicator lights up). 2 POWER key Turns the power to this unit on and turns this unit into the standby mode alternately. 3 Input selector keys Select input source. 4 VOLUME +/– keys Turn the volume level up/down. 3 For Other Component Control Identify the remote control transmitter keys with your component’s keys. If these keys are identical, their functions will be the same. For each key function, refer to the corresponding instruction in your component’s manual. 1 Tape deck keys 4 Control tape deck. * DIR A, B and A/B are applicable only to double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running. 2 Tuner keys Control tuner. +: Selects higher preset station number. –: Selects lower preset station number. A/B/C/D/E: Selects the group (A – E) of preset station numbers. 3 CD player keys Control compact disc player. * DISC is applicable only to compact disc changer. OPERATIONS TO PLAY A SOURCE 37 English 1, 6 2 BALANCE 5 5 4 3 2 l 0 l 2 3 4 L R LOUDNESS SLEEP AUX TAPE MD CD TUNER PHONO TAPE 6 BASS 5 5 4 3 3 2 2 l l0 4 TREBLE 5 5 4 3 3 2 2 l l0 4 NATURAL SOUND STEREO AMPLIFIER AX 392 SPEAKERSPHONES A ON B OFF VOLUMEINPUT MONITOR CD DIRECT AMP l6 20 28 40 60 l2 8 4 2 0 –dB STANDBY/ON l 5 7 4 3 2 l FLAT l0 9 8 –30dB 4 7 3 1 Set to the “°” position. l6 20 28 40 60 l2 8 4 2 0 –dB VOLUME 2 Turn the power on. Lights up. STANDBY/ON 3 Select a desired input source. The indicator for the selected source lights up. INPUT CDMDTAPE TUNERAUX PHONO 4 Select the speakers to be used. * If you use two speaker systems, press both the A and B switches. SPEAKERS A ON OFF B 5 Play the source. 6 Adjust to the desired output level. l6 20 28 40 60 l2 8 4 2 0 –dB VOLUME 7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls or turn on the CD DIRECT AMP switch. (Refer to page 13). Note If the TAPE MONITOR indicator is illuminated when you listen to a source, press the TAPE MONITOR switch to turn off the TAPE MONITOR indicator. When you finish using this unit Press the STANDBY/ON switch again to turn this unit into the standby mode. Standby mode In this state, this unit consumes a very small quantity of power to receive infrared-signals from the remote control transmitter. 11 TO RECORD A SOURCE TO TAPE (OR MD) 14 BALANCE 5 5 4 3 2 l 0 l 2 3 4 L R LOUDNESS SLEEP AUX TAPE MD CD TUNER PHONO TAPE 6 BASS 5 5 4 3 3 2 2 l l0 4 TREBLE 5 5 4 3 3 2 2 l l0 4 NATURAL SOUND STEREO AMPLIFIER AX 392 SPEAKERSPHONES A ON B OFF VOLUMEINPUT MONITOR CD DIRECT AMP l6 20 28 40 60 l2 8 4 2 0 –dB STANDBY/ON l 5 7 4 3 2 l FLAT l0 9 8 –30dB 12 1 Select the source you want to record. INPUT CDMDTAPE TUNERAUX PHONO 2 Play the source and then turn the VOLUME control up to confirm the input source. l6 20 28 40 60 l2 8 4 2 0 –dB VOLUME 3 Begin recording on the tape deck (or MD recorder etc.) connected to this unit. 4 If the tape deck connected to the TAPE terminals on the rear of this unit is used for recording, you can monitor the sounds being recorded by pressing the TAPE MONITOR switch so that the TAPE MONITOR indicator lights up. TAPE MONITOR Lights up. Note VOLUME, BASS, TREBLE, BALANCE, LOUDNESS controls and CD DIRECT AMP switch settings have no effect on the material being recorded. English Adjusting the BALANCE control Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions. 0 l l 22 3 3 44 L5 5R BALANCE Adjusting the BASS and TREBLE controls 0 0 l ll l 2 22 2 3 33 3 4 44 4 55 55 BASS TREBLE BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response. TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response. Selecting the SPEAKER system Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once. SPEAKERS AB ON OFF Using the CD DIRECT AMP switch You can enjoy the purest possible CD sound from your CD player by pressing this switch inward. By doing so, CD’s input signals are sent to the built-in special amplifier for CD directly bypassing the INPUT selector, the BASS, TREBLE, BALANCE and LOUDNESS controls, and then sent to the power amplifier. This signal routing reproduces the purest CD sound eliminating any alterations to the CD signals. CD DIRECT AMP Adjusting the continuously variable LOUDNESS control This control provi...