Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Never allow your amplifier to be driven into “clipping”. Otherwise the speaker may be damaged. l When using an amplifier with a rated output power higher than the nominal input power of the speaker, care should be taken never to exceed the speaker’s maximum input. l Do not attempt to clean the speaker with chemical solvents as this might damage the finish. To clean, wipe with a dry, soft cloth. l To prevent the enclosure from warping or discoloring, do not place the speaker where it will be exposed to direct sunlight or excessive humidity. l Do not place the speaker where it is liable to be knocked over or struck by falling objects. Stable placement will also ensure better sound performance. l Placing the speakers on the same shelf or rack as the turntable can result in feedback. l Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of the speaker. NS-100GT Speaker System Thank you for selecting this YAMAHA NS-100 speaker system. PRECAUTIONS PLACING THE SPEAKERS Place the speakers on a sturdy, vibration-free surface, on a wellbuilt stand. n Using as 2ch stereo speakers Better stereo images will be obtained when the speakers are slightly angled in towards the listeners. n Using as main speakers in a multi channel system Position the speakers on both sides of the TV. The positioning of speakers is important, because it controls the whole sound quality of a multi channel system. Set up the speakers on the basis of your listening position by following the owner’s manual supplied with your amplifier. OWNER’S MANUAL Type .......................... 2-way 2-speaker bass reflex speaker system (Magnetically-shielded type) Speaker Unit ............................................ 16 cm (6.5”) cone woofer 3 cm (1”) dome tweeter Nominal Impedance ............................................................. 6 ohms Frequency Response ............................................... 38 Hz – 35 kHz Nominal Input Power .............................................................. 100 W Maximum Input Power ........................................................... 300 W Sensitivity ................................................................ 90 dB/2.83 V/m Crossover Frequency .............................................................. 3 kHz Dimensions (WxHxD) ....................................... 212 x 416 x 270 mm (8.3” x 16.4” x 10.6”) Weight ................................................................... 8.6 kg (19.0 lbs.) l Specifications subject to change without notice due to product improvements. l Care should be taken not to exceed the input power values noted above. REMOVING THE FRONT COVER SPECIFICATIONS The front cover is fastened to the enclosure at four points, and can be removed if desired. To remove the cover, hold on to both sides and slowly pull straight away from the speaker. To reattach, line up the four pegs on the inside surface of the cover with the four corresponding holes on the speaker and push gently. Note When the cover is removed, take care not to touch the speaker units with your hands or to exert excessive force with tools. Surround L Surround R Subwoofer Center NS-100 (Main R) NS-100 (Main L) English SPEAKERS A B R L + – – + + – – + SPEAKERS R L SPEAKERS A B R L + – – + CONNECTIONS TO YOUR AMPLIFIER Leave the short bars in place when connecting. Short bar –