Оценок - 2, средний балл: 4
(
)
)
|
Фото и характеристики Yamaha YSP-4300 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
2 Troubleshooting ............................................................ 3 Specifications................................................................ 3 Features of the Wireless Subwoofer NS-WSW160 Installing the subwoofer Notes • The subwoofer requires sufficient space for heat discharge. When installing the subwoofer, be sure to leave a minimum space of 20 cm of open space above and behind and to the sides of the subwoofer. Do not cover the subwoofer heat discharge unit on the back of the subwoofer. • Be sure to install the subwoofer where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children. • When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV. • If the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV. An audio device such as the Digital Sound Projector Subwoofer 2 En The subwoofer can be laid on its side when positioned on a rack. To connect the subwoofer to other AirWired-enabled Yamaha devices wirelessly, the same group ID must be assigned to all the devices. The default group ID of the subwoofer is A1. The LINK indicator lights when the subwoofer is on and the subwoofer and other devices are connected wirelessly. Positioning the subwoofer on its side Removing the legs and sheets Turn clockwise Turn counterclockwise Attaching the legs and sheets Leg Sheet Connecting the subwoofer wirelessly A BC 123 LINK A BC 123 LINK Group ID switches LINK indicator Blinks: Establishing connection Lights: Connection established To AC wall outlet 3 En English Eng lis h Fr a nc a is De uts ch Sv en sk a Ita li an o Esp an ol N e derl ands If this product doesn’t work as expected, look for a possible cause below. If the issue you are experiencing is not listed, or you cannot resolve it after reading through these instructions, disconnect the power cable and contact an authorized Yamaha dealer or service center. Type ......................Advanced Yamaha Active Servo Technology Driver ...............................................................16 cm cone woofer non-magnetic shielding type Output power .............................75 W (100 Hz, 5 ., 10% T.H.D) Dynamic power....................................................................130 W Frequency response................................................. 30 Hz–200 Hz Wireless Frequency...................................................................2.4 GHz Transmission Range...... Approx. 20 m (without interference) Power supply [U.S.A. and Canada models] ...................... AC 120 V, 60 Hz [Taiwan model]................................... AC 110–120 V, 60 Hz [Australia model] ........................................ AC 240 V, 50 Hz [U.K., Europe and Russia models] ............. AC 230 V, 50 Hz [China model] ............................................. AC 220 V, 50 Hz [Korea model] ............................................. AC 220 V, 60 Hz [Asia model] .................................. AC 220–240 V, 50/60 Hz Power comsumption ..............................................................70 W Dimensions (W x H x D) Upright positioning ................................145 . 446 . 371 mm Positioned on side ..................................435 . 146 . 371 mm Weight.................................................................................. 9.0 kg Specifications are subject to change without notice. Troubleshooting Problem Cause Remedy No sound from the subwoofer. The subwoofer is not connected wirelessly. Make sure the power cable is connected properly. Check if the LINK indicator lights on the rear of the subwoofer (.p. 2). When the indicator does not light, check that devices to be connected wirelessly are assigned the same group ID. The volume of the subwoofer is low. Increase the volume of the subwoofer with the volume control for subwoofer on the connected device wirelessly. The subwoofer is too quiet. The source material doesn’t contain much bass. Try playing source material that contains more bass. Reposition the subwoofer (.p. 1). Specifications Caution-i Fr • Pour utiliser l'appareil au mieux de ses possibilites, lisez attentivement ce mode d'emploi. Conservez-le soigneusement pour reference. • Installez cet appareil dans un endroit frais, sec et propre, a l'ecart des fenetres et a l'abri des sources de chaleur, des vibrations, de la poussiere, de l'humidite et du froid. Evitez toute source de bruit electrique (transformateurs, moteurs). Pour eviter un incendie ou une electrocution, n'exposez pas cet appareil a la pluie ni a l'humidite. • La tension a utiliser est indiquee sur le panneau arriere. Il est dangereux d'utiliser cet appareil avec une tension superieure a celle specifiee, car vous risquez de provoquer un incendie et/ou de vous electrocuter. • Ne forcez pas sur les prises, les commandes ou les cables de connexion. Lorsque vous deplacez cet appareil, veillez tout d'abord a ...
Эта инструкция также подходит к моделям:Музыкальные инструменты - YSP-3300 (1.59 mb)