Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
When you are not using the optical cable, be sure to put the cap back in place. • When inserting the cable into the optical digital jack, make sure the direction is correct. 5 ¦ Affixing cables To prevent cables from becoming unplugged, place the supplied cable clamp with the open side facing upward, attach it to the rear panel of this unit in a suitable position, and then affix cables in the cable clamp. Optical cable Attach to this unit ¦ Information on HDMI™ Audio signals Input source Audio signal type DVD video Dolby Digital, DTS, PCM DVD audio 2-channel stereo (up to 96 kHz/24 bit) Blu-ray Disc HD DVD Dolby Digital, DTS, PCM Notes • When CPPM copy-protected DVD audio is played back, video and audio signals may not be output depending on the type of DVD player. • This unit is not compatible with HDCP-incompatible HDMI or DVI components. y • We recommend that you use an HDMI cable shorter than 5 m (16 ft) with the HDMI logo printed on it. • Use a conversion cable (HDMI jack - DVI-D jack) to connect this unit to other DVI components. ¦ Priority order for audio input signals When multiple types of audio signals are simultaneously being input from a single source component, this unit plays back the audio signals in the following priority order: HDMI > Digital > Analog As default settings, the following input jacks are assigned to the corresponding input sources: Input jack Input Source HDMI Digital Analog TV/STB DVD AUX 1 AUX 2 AUX 3 Cap 21 En PREPARATION English Connections Connections This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 23 to 26. If your TV has a built-in digital satellite tuner and an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit. y • We recommend that you secure the HDMI cable(s) with adhesive tape, etc. once you have connected the HDMI cable(s) to the HDMI jack(s) of this unit. • This unit outputs analog video signal and analog/digital audio signals input at the video/component video jacks and analog/digital input jacks at the HDMI OUT jack. Rear panel of this unit AUX 1 DVD IN OUT HDMI AAATV HDMI output HDMI input HDMI output DVD player/recorder Digital satellite tuner, cable TV tuner, digital airwave tuner, or game console * This connection (except for a game console) is not necessary if your TV has a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner. * Audio/Video A HDMI cable 22 En Connections Connections For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO IN jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit. For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD for easy viewing when you adjust the system parameters in SET MENU. If your TV has component video input jacks, connect the component video input jacks of your TV to the COMPONENT VIDEO OUT jacks of this unit in addition to the composite video connection. Once the component video connection is made, you can enjoy images with better resolution. y To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 21). Note If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals input at the TV/STB OPTICAL DIGITAL IN jack take priority over the analog audio signals input at the TV/STB AUDIO IN jacks. Rear panel of this unit AUX 1 TV/STBAUDIO IN COMPONENT VIDEO OUT OPTICAL COAXIAL DVD AUX 2 AUX 1 TV/STB DIGITAL IN Optical digital output R L Video input Analog audio output Component video input TV Video Audio PREPARATION OSD video pin cable Audio pin cable Component video pin cable Optical cable 23 En English Connections Connections For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to the coaxial digital audio connection. For video connection, connect the video output jack of your DVD player/recorder to the DVD/AUX 2 VIDEO IN jack of this unit. If your DVD player/recorder has component video output jacks, connect the component video output jacks of your DVD player/recorder to the DVD/AUX 2 COMPONENT VIDEO IN jacks of this unit. Once the component video connection is made, you can enjoy images with better resolution. y To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 21). N...