Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Installation Manual Manuel d’installation Installationsanleitung Instllationsanvisningar Manuale d’installazione Manual de instalacion Installatiehandleiding .......... DIMENSIONS DIMENSIONS ABMESSUNGEN MATTSKISSER DIMENSIONI DIMENSIONES AFMETINGEN .......... Large wall mount bracket Grand support mural Gro.e Wandhalterung Stort vaggmonteringsfaste Staffa di installazione a muro grande Soporte de montaje en pared grande Grote wandbevestigingsbeugel ................ Small wall mount bracket Petit support mural Kleine Wandhalterung Litet vaggmonteringsfaste Staffa di installazione a muro piccola Soporte de montaje en pared pequeno Kleine wandbevestigingsbeugel ................ Unit with bracket Le systeme avec son support Einheit mit Halterung Ljudprojektorn med fastet Unita con staffa Unidad con mensula Toestel met de beugel ............ 200 138 800 150 187.5 187.5 225 225 262.5 262.5 300 300 150 355 355 385 385 (mm) 1.3kg 50 20 25.2 76 129.5 5 M6TAP 4 0 1 1 1 4 3 3 1 3 0 1 2 5 1 1 0 (mm) (mm) YSP-1 0.1kg . 2 SPM-K1 Eng lish English SPM-K1 Installation Manual Thank you very much for purchasing the Wall Mount Bracket SPM-K1. Be sure to read this manual thoroughly before using this bracket. After you have read this manual, retain it for future reference. When installing the Sound Projector using this bracket, all installation work must be performed by a qualified contractor or dealer personnel. The customer must never attempt to perform this installation work. Improper or inadequate installation could cause the Sound Projector to fall, resulting in personal injury. SAFETY INSTRUCTIONS • Always follow the instructions set forth in this manual when installing the Sound Projector using this bracket. Improper or inadequate installation could cause the Sound Projector to fall, resulting in personal injury. • The installation must be secure enough to bear the weight of the Sound Projector, the wall bracket and other hardware indefinitely, and must also be secure enough to withstand vibrations. Improper or inadequate installation could cause the Sound Projector to fall, resulting in personal injury. • To ensure safety, all screws must be tightened securely. Loose screws could cause the Sound Projector to fall, resulting in personal injury. • Make sure to leave adequate ventilation space around the unit to allow heat generated by the Sound Projector to dissipate. Failure to provide adequate space around the unit could cause the Sound Projector to overheat internally, resulting in a fire. • Never hang from the Sound Projector or the wall bracket. Hanging from the Sound Projector or the wall bracket could cause the Sound Projector or the wall bracket to fall, resulting in personal injury. • Once the Sound Projector is installed, safety checks should be conducted on a regular basis. If the Sound Projector is used over an extended period of time, screws can become loose and the installation can become weaker due to the passage of time, vibrations, etc. E-1 ACCESSORIES ACCESSORIES Small wall mount brackets (2) Projector mounting screws (M6 x 16) (6) Safety wires (2) M4 x 10 Screws (2) Length 300mm Prepare more than six sets of commercially available screws (M5-M6, 25 mm or more in length) and washers in addition to the accessories shown above. INSTALLATION PROCEDURE INSTALLATION PROCEDURE Attach the large wall mount bracket to the wall. In order to secure the unit to the wall, you will need to attach the bracket to the wall first in a manner befitting the structure and quality of the wall. Choose a location where the wall can bear the weight of the whole unit. Before installing the bracket, make sure of the size (see “DIMENSIONS” on the first page of this manual). Installation example Washer (commercially available) 5~6mm Tapping Screw (commercially available) In order to secure the unit to the wall, attach four (or more) tapping screws using the outside of the holes in the wall mount bracket. Installing into a dry wall. Installing directly into a wall, etc.. 25mm or more 25mm or more Beam, etc. Dry wall Choose a secure wall or beam to fasten the screws. Do not install them into walls mafe of weak material that can easily come off, such as mortar or plywood wall panels. Loose screws could cause the projector to fall, resulting in personal injury. Attach the safety wire. Choose a method (A or B) when attaching the safety wire. When you choose the method A, attach the safety wire using M4 screws provided. (Some of the projectors have no screw hole depending on the date of manufacture.) A When attaching to the projector. B When attaching to the small wall mount bracket. Slip one end M4 screw through the loop at provided the other end Attach the Slip the safety safety wires wire through a to the left and hole in the right sides of bracket the projector. Repeat the same procedure for the other bracket. Safety wire Rear panel of the projector If you tighten the screws on the slant, the screw threads in the projector might be bro...