Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Program Change Table....................................33 3-5. MIDI Mode.......................................................33 3-6. Device Number, Local Control.........................33 3-7. MIDI Merge......................................................33 3-8. Dump Interval..................................................34 3-9. Send Hi-Hat Control........................................34 3-10. Host Thru Port.................................................34 * Please refer to the [MIDI Data Format] (P 52) section for more information related to MIDI. 3-1. Bulk Dump With the Bulk Dump operation, data stored in the DTXPRESS III can be transmitted via the MIDI OUT or TO HOST jack. q © Fmt (Bulk Dump Format) Selects the type of data to be transmitted with the Bulk Dump operation. all data : All the data in the DTXPRESS III system data : Data set in the Utility mode (except User Map). user map : User Map data. one drumkit : Data for the currently selected Drum Kit. all drumkit : All User Drum Kit Data. one trigger : Data for the currently selected Trigger Setup. all trigger : All User Trigger Setup data one song : Data for the currently selected User Song. all song : All User Song data. Procedure 1. After reading the [Connecting a MIDI Device] (Basic Guide : P. 14) or the [Connecting a Computer] (Basic Guide : P. 28) section, connect the external MIDI device or computer to the MIDI OUT or TO HOST jack on the DTXPRESS III. Set the HOST SELECT switch. 31 Utility Mode 2. Select the type of bulk data (that will be sent) in the display shown above and press the [SAVE/ENT] button. The display shown below will appear. i!!!1 i i i i/" *"■ "i "i ■"■! ■■■. '!* ■■■. BULK all data Are you sure ? 3. Press the [SAVE/ENT] or [VALUE+] button, the bulk dump will be carried out. * Press [VALUE-] to cancel the bulk dump. When the operation is complete, the LCD will display “Complete” as shown below. ! "' :v. :■■■. "i cui'ipiete ■ * The device number must be set for bulk dumps [3-6. Device Number, Local Control] (P 33) * Refer to the [MIDI Data Format] section (P 52) for more information on bulk dump operations. 3-2. Channel 10 Program Change/Channel Event Receive This enables or disables the DTXPRESS III to receive program change messages/channel events through MIDI channel 10. Program change messages received or transmitted through channel 10 can be used to switch DTXPRESS III drum kits. It is necessary to set the receive parameter to “on” in this display in order to switch the DTXPRESS III’s drum kits from a song or an external MIDI device. UT MIDI RECEIVE 10PC= un 10= un © 10PC (Receive Program Change) This enables or disables the DTXPRESS III to receive program change messages through MIDI channel 10. off: Does not receive. on: Receives. * Even if the © 10PC parameter is set to “on”, program change messages from MIDI channel 10 will not be received in the following cases. • If the © 10 (receive channel event) parameter is set to “off” • If the [3-3. Receive Program Change/System Exclusive Message's] © PC (program change) parameter is set to “off”. © 10 (Receive Channel Event) This enables or disables the DTXPRESS III to receive MIDI channel messages through MIDI channel 10. off: Does not receive. on: Receives. 3-3. Receive Program Change/System Exclusive Messages This enables or disables the DTXPRESS III to receive program change messages/system exclusive messages from all MIDI channels. Receiving Bulk Data DTXPRESS III data stored in an external device can be sent back to the DTXPRESS III’s MIDI IN/TO HOST jack using Bulk Data Receive. 1. After reading the [Connecting a MIDI Device] (Basic Guide : P. 14) or the [Connecting a Computer] (Basic Guide : P. 28) section, connect the MIDI device or computer to the MIDI OUT jack/TO HOST jack on the DTXPRESS III. Set the HOST SELECT switch. 2. With the sequencer (song, metronome) stopped, send bulk data from the external device. 3. When the DTXPRESS III starts receiving data, the following screen will appear on the LCD. !!!!'! !! i/" i!!!1 .■■■. .■■■ .■■■. ■!::■! ¡,*. :*"! bulk Receiving 4. When the DTXPRESS III has completed receiving all the data, the following screen will appear on the LCD for a few seconds, then the screen will return to the original display (before receiving bulk data). Ü!!1 i ! ! B .■■■. .■■■ .■■■. ■! : : .■■■. bulk Received« * Before receiving bulk data, it is necessary to match the de- vice numbers (P. 33 [3-6]) of the DTXPRESS III and the external device. It is also necessary to enable the DTXPRESS III to receive exclusive messages (P. 32 [3-3]). P'l !*"• ...» ...... 1*”’ . . I*“* i**”............. PC= on jyjLA= on © w © PC (Receive Program Change) off: Does not receive program change messages. on: Receives program change messages. @ SySex (Receive System Exclusive Messages) off: Does not receive system exclusive messages. on: Receives system exclusive messages. 32 Utility Mode 3-...