Оценок - 3, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The trigger number and trigger name will be displayed. Presets are numbered 1-5 and user setups are numbered 6-9. * For more information on the preset trigger setup, refer to the [Trigger Setup List] (P. 49). * Once a setting is changed in the Trigger Edit mode, “*” will appear between “TRIG” and “=” until the data is stored. eTrigger Input Number [Range] 1-10 This number indicates the trigger input number of the pad that was last struck. Groove Check Function Function As you play the pads along with a song, the DTXPRESS II will compare your performance with its song clock and let you know how accurate your timing is. Display In the Drum Kit Play mode (from any display) press the [SHIFT]+[SEL>] (GRV) buttons. * The Groove Check function will quit when song playback is stopped. GRV -----.----- Groov=0 Avg=0 e q w q Groov (Groove) [Range] –48 to 0 to +48 The difference in the timing of each stroke on the pad is displayed. If the timing of the stroke is late compared to the just time, a minus value will be displayed. If your timing is early, a plus value will be displayed. If you timing is perfect, “0” will be displayed. w Avg (Average) [Range] –48 to 0 to +48 This function displays the average value of your timing accuracy after the Groove Check function is switched ON. This function checks your performance on the entire drum set and can check your performance on one song. The information shown in the display is the same as in q Groov. * To reset the data, press the [SHIFT]+[SEL>] buttons twice. e Graph Indicates the timing by means of a graph. About the Song The DTXPRESS II can internally store data for a maximum of 127 songs that can be played back freely. Song numbers 1-95 are preset songs and song data in those songs cannot be changed or rewritten. Song numbers 96-127 are user songs that can be used to record new performance data and also edit song data in. Song Makeup The Song consists of two sequencer tracks plus header data. Header data is written at the front of the song and holds information related to the song’s tempo, beat, program numbers (voice) for each MIDI channel and volume, etc. Header data is read every time the song is played from the beginning. Both tracks possess data for MIDI channels 1-16 (except system exclusive data). Durring song playback, the sequencer data that is written in the song will be transmitted to the DTXPRESS II’s tone generator to produce the song. Main Song and Pad Song Up to four songs can be played back simultaneously. The song that is selected in the Drum Kit Play mode (P. 6) is called the Main Song. Pressing the [>/] button will start playback of this song. The remaining three songs are called Pad Song(s). These songs are played back according to the trigger input (hitting a pad). Metronome The sequencer produces the metronome. The metronome can be used either alone or with the Song. Press the [CLICK] button, in any mode, to start the metronome. The metronome’s tempo, voice, etc. are set in the Utility mode [4. Sequencer Group] (P. 33). Song Playback Main Song Playback • Select a Song 1. Press the [SONG] button to enter the Song & Tempo display. SONG .=110 4/4= . 1 HighRise -. Song Number Song Name 2. Use the [VALUE–]/[VALUE+] buttons to set the song number of the song you want to playback. • Set the Tempo, Repeat Playback, Beat and Metronome 1. In the previously selected Song & Tempo display, use the [SEL<]/[SEL>] buttons to move the cursor to the parameter you want to edit, then use the [VALUE–]/ [VALUE+] buttons to set the value. SONG .=110 4/4= . 1 HighRise -. Tempo Beat Metronome Note Value Repeat Playback • Song Playback (Start/Stop) Press the [>/] button, in any display, to start playback of the song (main song). During playback, press the [>/] button to stop playback of the song. Press the [>/] button again and the song will start playback from the beginning. * If the pad’s function is previously set to the “Main Song Control” function (m Drum Kit Voice Edit Mode [2-6. Function] P. 20), you can start/stop the main song by hitting the assigned pad. * During song playback, the [SONG] button’s LED will blink for a moment at the beginning of each measure. * During song playback, the song cannot be changed. * If the song’s tempo or voices are irregular, re-select the song. About the Song About the Song Pad Song Playback (Start/Stop) To playback a Pad Song, hit the pad that is assigned to the Pad Song you want to playback. Hit the same pad during playback will stop the song. Hit the pad again to start the song from the beginning. * Before using, set the pad’s function to “Pad Song Control” and assign a song to the pad (m Drum Kit Voice Edit mode [2-6. Function], [2-7. Pad Song] P. 20). * The song can be played one measure at a time, each measure triggered with a stroke on the pad (m Drum Kit Voice Edit mode [2-7. Pad Song] P. 20) * If the Pad Song’s tempo or voices are irregular, re-select the Drum Kit. Song Playback Functions During song playback, the song ...