Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• For assembly, you will require four individual packages – an RS500 Rack System, a DTP520C Pad Set, a DTP700P Pad Set*, and a DTX500 Drum Trigger Module. (*: The DTX520K uses a DTP520P Pad Set instead.) • This pamphlet describes how to attach the pads and drum trigger module to the RS500 Rack System. Before carrying out the procedures described below, ensure that you have correctly assembled the rack system as described in its assembly manual. • Although this pamphlet uses illustrations of the DTX540K, the assembly procedures described also apply to the DTX520K. Before starting assembly, lay a drum mat (sold separately) on the floor. Alternatively, before setting up the HH65 Hi-hat Controller and KP65 Kick Pad, you can place the packages' cardboard boxes on the floor to protect it from damage. Before using, please read this assembly manual, and use this product in a safe and proper manner. * Please keep this manual in a safe place for future reference. * Make sure to read the Assembly Manual of the Rack System and the Owner’s Manual of the Pad. NOTICE • Make sure you hold onto the plug, not the cable, when connecting or disconnecting the cable. Also, never place any heavy or sharp objects on the cable. Applying excessive force to the cable may result in damage to the cable, such as the wires being severed, etc. • Do not step on or place heavy objects on the product. It may result in damage. • Do not use or keep the product in places with extremely high temperature (places in direct sunlight, close to a heater, in a closed car, etc.) or high humidity (bathroom, outside on a rainy day, etc.). Doing so may result in deformation, discoloration, damage or deterioration. • When cleaning the product, do not use benzine, thinner or alcohol as it may result in discoloration or deformation. Please wipe with a soft cloth or a damp cloth that has been wrung out thoroughly. If the product is soiled or sticky, use a neutral detergent on a cloth then wipe with a damp cloth that has been wrung out thoroughly to remove any remaining detergent. Also pay close attention so as not to let the water and detergent come into contact with the cushions used in the product; doing so may result in deterioration. * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. EN PRECAUTIONS Example of standard DTX540K assembly PCY100 (Cymbal Pad) XP70 (Tom Pad) XP70 (Tom Pad) KP65 (Kick Pad) XP80 (Snare Pad) HH65 (Hi-hat Controller) DTX500 Drum Trigger Module PCY100 (Hi-hat Pad) RS500 (Rack System) PCY135 (Cymbal Pad) IMPORTANT NOTICE If this symbol is ignored and the equipment is used improperly, fatal injury to persons or serious damage could occur. • Do not let small children assemble or set up this product by themselves, or they may be injured. Always assemble this product with adult supervision. • Be careful with the edges of the Cymbal Holders and the Tom Holders. The sharp holder ends may result in injury. • Be careful with the edges of the spurs attached to the Kick Pad and foot pedal. The sharp ends may result in injury. • If this product is used with a Rack System or Cymbal Stand, make sure all bolts are tightened firmly. Also, when adjusting the height or angle, do not suddenly loosen the bolts. Loose bolts may result in the rack overturning or parts dropping, causing injury. • Always set the product on a flat and solid surface. Placement on a sloping, unstable surface or on steps may result in the product being unstable and subject to overturning. • When setting up the product, please pay close attention to the handling and setting of cables. Carelessly placed cables may cause the user and others to trip and fall. • Do not alter the product. Doing so may result in injury or damage/deterioration to the product. • Do not sit or step on the rack. The rack may overturn or be damaged, resulting in injury. If this symbol is ignored and the equipment is used improperly, there is a danger or injury to persons handling the equipment, and material damage could occur. • Watch your fingers when adjusting clamps. They may become pinched, resulting in injury. • Be careful around pipe ends, inside the pipe and screw ends. Metal shavings, etc. may injure your fingers. • Do not put your hands or feet under the foot pedal or foot switch. They may be pinched, resulting in injury. • Do not attach acoustic drums to the electronic drum rack. Clamps may be damaged and drums may drop, causing injury. Digital Musical Instruments Division ©2011 Yamaha Corporation WW60810 110PO***.*01C0 WARNING CAUTION Assemble the RS500 Rack System. For details, refer to the assembly manual that came with the rack system. Check the contents of each package. Mount the pads and the drum trigger module on the rack...
Эта инструкция также подходит к моделям:Музыкальные инструменты - DTX540K (2.63 mb)