Оценок - 4, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
. Clean the inside of the valves. • Dust has scratched the inside of the valve casings. . Wash out the dust as soon as possible. • Dropping or hitting the piston has damaged it. . Never use the instrument with a damaged piston. Contact the dealer from whom you purchased the instrument. • The pistons or valve casings are corroded. . Contact the dealer from whom you purchased the instrument. The rotors are sluggish. • Dirt has accumulated between the rotors and valve casings. . Oil the lever mechanisms with lever oil. . Contact the dealer from whom you purchased the instrument. The valve slide is stuck and cannot be removed. The slide is sluggish. • There is dirt or dust inside the slide. . Thoroughly remove dirt and apply some slide grease that matches the type of slide. Or apply some tuning slide oil to the slide. • Dropping or hitting the slide has caused a dent, or the slide was bent while cleaning. . Contact the dealer from whom you purchased the instrument. The screw is too tight and cannot be removed. • The screw is corroded. • Hitting the instrument has damaged the screw. . Contact the dealer from whom you purchased the instrument. Air does not pass through the instrument. • The piston is in the wrong valve casing. . Set the piston into its proper valve casing. The mouthpiece cannot be removed. • The instrument was dropped or hit with the mouthpiece attached. Or, the mouthpiece was inserted with too much force. • The instrument has been left for a long period of time with the mouthpiece inserted in the instrument. . Contact the dealer from whom you purchased the instrument. The instrument makes an abnormal sound when played. • Solder on the instrument has come loose, or a foreign object is in the pipe. . Contact the dealer from whom you purchased the instrument. Troubleshooting 33 The piston makes a metallic sound when moved. • The felt is torn or lost. . Replace the felt with a new one. • The screws on the piston valve or valve casing are loose. . Firmly tighten the screws. • The piston shaft is bent. . Contact the dealer from whom you purchased the instrument. The rotor lever makes a metallic sound when moved. • There is contact or scraping with the lever’s springs. . Oil the lever mechanisms with lever oil. • The lever comes into contact with the pipes. . Contact the dealer from whom you purchased the instrument. • The screws are loose. . Firmly tighten the screws. • The rotor and valve casing have come loose. . Contact the dealer from whom you purchased the instrument. Water leaks from the slides. • Not enough grease. . Apply grease to the slides. Troubleshooting 130 3 2 1 ¦................................¦ Baritone/Euphonium......¦ Bariton/Euphonium......¦ Baryton/Euphonium......¦ Baritono/Eufonio ...... 3 2 1 ........b ........ 4 ....................../Fingering Chart/Grifftabelle/ . ....................... .. Denotes alternate fingerings..... . .. Kennzeichnet alternative Griffe........ .. Autres doigtes de remplacement....... ¦........
Эта инструкция также подходит к моделям:Музыкальные инструменты - YBB-105 (9.73 mb)
Музыкальные инструменты - YBB-105S (9.73 mb)
Музыкальные инструменты - YBB-201 (9.73 mb)
Музыкальные инструменты - YBB-201S (9.73 mb)