Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
The timing of the metronome sound will depend on the tempo map settings (p. 118). Off: The metronome sound will not be output. MASTER: Output the metronome sound from the MASTER. TRACK CUE: Output the metronome sound from the TRACK CUE. TR CUE+MST: Output the metronome sound from the MASTER and the TRACK CUE. MIDI: A Note message will be transmitted from MIDI OUT connector as the metronome. Select this when you wish to play the metronome using a sound of an external MIDI sound source. MODE Specify how the metronome will sound. Rec Only: The metronome will sound only during recording. Rec&Play: The metronome will sound during both recording and playback. LEVEL Adjust the volume level (0 to 127) of the metronome sound. * This is the volume level of the metronome built into the VS-840GX. If you are using an external MIDI sound source to sound the metronome, adjust the metronome volume on the external MIDI sound source. 4. This completes the metronome settings. Press [DISPLAY] to return to Play mode. ■ Using an external MIDI sound source to play the metronome A MIDI sound source can be used to play the metronome with a sound of your choosing. 1. Use a MIDI cable to connect the VS-840GX and your MIDI sound source as follows. 2. Press [UTILITY]. % Chapter 9, Other convenient functions 3. Use [CURSOR] to select the Metronome Parameter icon, and press [ENTER/TAP]. O' METRONOME TPl......ffl'r’IIM.n-- {■> ■>) Pi 4. The page for setting metronome-related parameters will appear. Use [CURSOR] to select the following parameters, and use the TIME/YALUE dial to set the value of each. OUTPUT: Set this to "MIDI." MODE: If you want the metronome to sound only during recording, select "Rec Only." If you want it to sound during both recording and playback, select "Rec&Play." * If you are using an external MIDI sound source to sound the metronome, adjust the metronome volume on the external MIDI sound source. MIDI CH (MIDI channel): Select the MIDI channel on which the metronome note messages will be transmitted. Set this to match the MIDI receive channel of your MIDI sound source. Acc.Note: Select the note number (C_0 to G_9) for the downbeat of the metronome. If you are playing a drum set, this will select the percussion instrument. Acc.Velo: Specify the velocity (1 to 127) of the metronome downbeat. Nrm.Note: Select the note number (C_0 to G_9) for the upbeats of the metronome. If you are playing a drum set, this will select the percussion instrument. Nrm.Velo: Specify the velocity (1 to 127) of the upbeats of the metronome. 5. This completes metronome settings. Press [DISPLAY] to return to Play mode. Using a foot switch to play-back/stop _ A foot switch connected to the FOOT SWITCH jack can be used instead of [PLAY][STOP]. This is convenient when your hands are already occupied, such as when you are playing a guitar on stage. 1. Press [UTILITY]. 2. Use [CURSOR] to select the System Utility icon, and press [ENTER/TAP]. tauTiLiTV № SYSTEM am 3. Use [CURSOR] to select the Global Parameter icon, and press [ENTER/TAP]. :vstem GLOBAL PRM tL I PRM j ©J QjUT’. 4. Use [CURSOR] to move the cursor to "Foot Switch," and use the TIME/VALUE dial to select "Play/Stop." 5. Press [DISPLAY] to return to Play mode. Foot Switch This sets the function of the foot switch connected to the FOOT SWITCH jack. Play/Stop: The song will alternately playback and stop each time the foot switch is pressed. Record: The foot switch will have the same function as the [REC]. Use this to switch between recording and playback during manual punch-in recording. Tap Marker: The foot switch will have the same function as the [TAP]. A Mark point will be placed at the time location where you press the foot switch. Previous: Each time you press the foot switch, you will move to the previous Mark point. Next: Each time you press the foot switch, you will move to the next Mark point. Effect: One parameter specified by each algorithm is assigned to the foot switch. TUNER: Pressing on the foot switch will alternately switch the On/Off status of the tuner. Efx Prev: Each time you press the foot switch, you will move to the previous effect patch. Efx Next: Each time you press the foot switch, you will move to the next effect patch. 17 Chapter 9. Other convenient functions Stopping automatically (Marker stop)__ You can cause song playback-to stop automatically at a mark point. 1. Press [UTILITY]. 2. Use [CURSOR] to select the System Utility icon, and press [ENTER/TAP]. . I'l l I' •'V'TTFM i dUTILITV ^ 3. Use [CURSOR] to select the Play/Rec Parameter icon, and press [ENTER/TAP]. |J' PLftV-ftECPRM 1 QiUTVtfVSTEM 4. Use [CURSOR] to move the cursor to "MARKER Stop," and use the TIME/VALUE dial to select "On." MARKER Stop Turn this "On" when you want song playback to automatically halt at time locations where a Mark point exists. 5. Press [DISPLAY] to return to Play mode. Changing the pitch durin...