Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
Using this function, you can load data on the S - 550/330’s sound disk into the S - 50. When you load a patch, this function automatically loads tone parameters and wave data as well as the patch parameters. With the supplied software of the S - 50, you need to load patch parameters, then each tone (= tone parameters and wave data) of the patch. This includes various functions : saving the sound data loaded in the S - 50’s internal memory onto a disk, formatting a disk, changing the system to the S - 50’s supplied system disk, and backing up the SYS - 505 system disk. 1. Library Converter 2. Load Patch/Tone 3. System Command CONTENTS How to boot up the S - 50 with the SYS - 505 ■ 5 • 6 ■ 8 ■ 9 12 Outline 1. Library Converter 1. Convert Disk- 2. Convert Load 3. Save All..... 14 2. Load Patch/Tone— 1. Load Patch/Tone 2. Save All .......... 3. Delete All......... 16 18 19 20 21 22 23 24 15 3. System Commands......................... 1. Disk Format............................ 2. Backup of the SYS - 505 System Disk 3. Change system ........................ Specifications 3 For users of the S - 50 with Ver.1.0 system disks To utilize the SYS - 505, you need to update your system disk to Ver.2.0. All the S - 550/330 sound disks converted with the Library Converter function will be equivalent to Ver.2.0. The Load Patch function does not apply to loading data from S - 50 Ver.1.0. To update your system disk to Ver.2.0, execute “Convert” (see page 113 in the S - 50 Ver.2.0 owner’s manual) with “SYS - 502", the Ver.2.0 system disk for the S - 50. CRT Display This software requires a CRT display. (See page 9 in the S — 50 Ver.2.0 owner’s manual.) Caring for Your Floppy Disks Although your 3.5-inch floppy disks hard protective cases, the actual recording medium is a thin coating of magnetic material on a flimsy plastic disk, and the recording density is very high. To prevent irretrievable loss of your valuable data, always handle your disks with the proper care. Backup the SYS - 505 system disk. Backing up the SYS —505 system disk will retain the sound data in the S - 50’s internal memory, therefore, it is not necessary to save the sound data before taking the backup procedure. How to back up a disk is explained on page 22. 4 How to boot up the S — 50 with the SYS — 505 Before you switch on the unit, check the following points : (1) the unit is set up correctly with the other devices. (2) no disk is inserted into the disk drive. Procedure 1 Switch on the Display. Procedure 2 Switch on the S - 50. The Display shows the message “Please Insert System Disk", and the indicator of the floppy disk drive lights up. Procedure 3 Make sure that the protect tab on the SYS - 505's system disk is set to the PROTECT position, and insert the disk into the disk drive. When the system program has been correctly loaded, the Display shows the names of the three modes. This is the basic display of this system, where you select a mode. *Do not remove the disk or turn the unit off until the basic display appears. It may damage the floppy disk permanently. *When editing sound data in the internal memory with the S - 50 Ver.2.0 system, you can move to the SYS - 505 system leaving sound data in the internal memory intact, using the “Change SYS” function. 5 OUTLINE 1. The three Modes of SYS — 505 Each of the three Modes has several commands. Mode —| Library Converter —| Load Patch/Tone —| System Command Command Convert Disk 1,2 Convert Disk 1 Convert Disk 2 Convert Load 1 Convert Load 2 Save All Load Patch/Tone Save All Delete All Format Disk System Backup Change System 2. Display Layout The Mode currently selected The command currently selected 6 3. Basic Procedure SYS - 505 requires only four buttons : the upper and lower Cursor buttons, ENTER button and 0 button. ■ Selecting a Mode, Command or Patch Name. Use the upper and lower Cursor buttons. Г Library Converter 4 1 Load Patch/Tone H- V........ System Command J 11111 WMmm b ■ Executing and canceling If you wish to enter the mode, command, or patch name where the cursor currently resides, press the ENTER button. To cancel and leave the current mode or command, press the 0 button. STU vwx YZ/ 17 II 8 ZId 9 1 JKL MNO PQR 1 4 II ft 1 1 6 1 ABC DEF GHI I 1 II 2 II 3 1 + - * SPACE I o I 1 7 LIBRARY CONVERTER 1. LIBRARY CONVERTER Library Converter Mode Step 1 Call the basic display, (press the 0 button until the basic display is called,) Step 2 Move the cursor to “Library Converter", and press the ENTER button. This Mode provides the following three functions : 1. Convert Disk......................................Page 9 This function loads sound data from the S - 550/330 disk into the S - 50, then saves it onto a disk formatted with the S - 50 Ver.2.0. 2. Convert Load ....................................Page 12 This function loads sound data from the S - 550/330 disk into the S - 50. ...