Оценок - , средний балл:
(
)
)
Производитель: Roland
Размер: 3.16 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Read this along with the documentation for your DV recorder and audio recorder (such as the A-6). * It is impossible to connect to the Panasonic VHS recorder (5-pin editing terminal). * When the DV recorders of Som/ and Panasonic are connected simultaneously, select ivhich DV recorder to use, with the selector switch on the front panel. Synchronizing the Time Codes If you're using a Panasonic DV recorder, make the frame rate of the MTC (MIDI Time Code) that the SI-80SP sends to the audio recorder (such as the A-6) matches the frame rate of the video time code. The corresponding frame rate of the time code mav vary according to your country or video equipment. The types of MTC (MIDI Time Code) that the SI-80SP can send are listed below. The corresponding indicator lights up to show the MTC frame rate that is presently being sent. NTSC (29.97) DF: This is d rop frame at a rate of 29.97 frames per second.. It is used in the NTSC color video standard. NTSC (29.97) NDF :This is non-drop frame at a rate of 29.97 frames per second. It is used in the NTSC color video standard. PAL (25): This is a frame rate of 25 frames per second. It is used in SECAM- and SECAM-standard video and audio equipment as well as in motion pictures. About Time Codes (NTSC Format) Time codes such as the following are genera' ly used for NTSC-format video equipment. The setting should normal ly be left at NTSC (29.97) DF. MiniDV (consumer-use DV recorders): 29.97DF DVCAM (commercial-use DV recorders): 29.97NDF or 29.97DF (selectable) 1. Plug the AC adapter into a power outlet. 2. Press the [SELECT] button. Each press of the button switches the frame rate. 21 Using a Panasonic DV Recorder (Connected to the EDIT © Connector) Roland СП-еЗГ“ИСГ!!!Э viOEQ mo DUibn SYNC INTERFACE AUTO DETECT L-connectors m VIDEO MIDI TIME CODE ÍMTC) 0 — 0 ! 1 Î NTSC (29.S7Í PAL(25)fesltóiÉ DF NDF 1 0 О 0 П 1 1 1 V [ 5-PiN W/E01T0R 1 i_PIN ni © 3. The AUTO DETECT/SELECT indicator lights up or blinks to show the present frame rate. lit (or blink) AUTO DETECT i-1-! NTSC (29.97) PAL (25) ОГ/ NDF ;o: • ® /1 \ i i SELECT _ Frame Rate (Time Code) set by the SI-80SP 22 Using a Panasonic DV Recorder (Connected to the EDIT © Connector) Saving the Time Code Settings When the AUTO DETECT/SELECT indicator is blinking, it means the frame rate was changed. If the power to the SI-80SP is turned off while in this state, the time-code settings are lost. Follow the steps below to save the settings. 1. Hold d own the [SELECT] button for at least three seconds. The indicator showing the present frame rate blinks somewhat rapidly. Ф Roland SI-BDSP VIDEO MIDI SYNC INTERFACE AUTO DETECT T" NTSC (29.97) PAL (25' DF NDF 0 О О п 1 I I V L-CONNECTORS 5-PIN W/EDITOR I 5-PIN □и © 2. When all the indicator are lighted, release the [SELECT] button. The settings are saved in internal memory, and remain in memory even after the power is turned off. * Saving may take up to 30 seconds. Never switch the power off while all indicator: are lighted. Doiir? so may damage the STSOSP’s systems. 3. When the save is finished, only the indicator for the changed frame rate remains lighted. 23 Using a Panasonic DV Recorder (Connected to the EDIT © Connector) Recording a Video Tape's Simultaneous Audio Track on an Audio Recorder (A-6, Etc.) Now let's record the audio that's recorded on video tape simultaneously with the video (the synchronized audio) on an audio recorder (such as the A-6). Make the connections as shown below'. Stereo Set, etc. INPUT (VCR) Audio Output 5-PIN EDITING TERMINALS Min. „V.IP . ,.n, EDIT© IN SYNC MIDI W OUT (MTC) IN « Audio Input ■ ;'c OUTPUT (MASTER) a RoJand Si-BQSP DV Recorder (NV-DV10000, etc.) DC IN loo EEIEI: II Hi Ai Audio Recorder (Roland A-6, etc.) AC Adaptor ' To prevent malfunction and/or damage to speakers or other devices, alxvays turn doxvn the volume, and turn off the poxoer on all devices before making aim connections. ' Once the connections have been completed, turn on poxrer to i/our various devices in the order specified. By turning on devices in the xvrong order, you risk causing malfunction and/or damage to speakers and other devices. 24 Using a Panasonic DV Recorder (Connected to the EDIT © Connector) * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit