Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Set the INPUT VOLUME control © REVERB VOLUME © fully counter-clockwise. 2. When using the RE-501 with mixer echo send and return circuits, set the DIRECT SIGNAL switcn©at OFF; for other situations, set at ON. 3. Set the INPUT LEVEL switchOas needed. 4. Set the OUTPUT LEVEL switch © as needed. 5. Turn the POWER switch © ON, 6. Turn up the INPUT VOLUME control©. Set the CHORUS ©, ECHO ©, and S ON S EFFECT ® switches at OFF (buttons in the raised positions). 7. Set the INPUT VOLUME controi©so that the INPUT LEVEL INDICATOR O reads an average of OdB when inputting sound. NOTE: The INPUT VOLUME controi©does not affect the balanced input. USING THE CHORUS EFFECT Set the controls at their normal positions as given previously, 1, Depress the CHORUS ON/OFF button © and note that the CHORUS indicator ©lights. 2. Adjust the depth of the chorus effect with the chorus intensity control ©. USING THE ECHO EFFECT Set the controls at their normal positions as given previously. 1. Depress the ECHO ON/OFF button © and note that the ECHO indicator © lights. 2. Adjust the depth of the echo effect with the ECHO/S ON S VOLUME control ©. 3. Set the ECHO MODE SELECTOR switch © for the desired echo pattern. 4. Set the ECHO/S ON S REPEAT RATE control © for the desired repeat rate. 5. Set the SINGLE DELAY switch © at REPEAT (up!. USING THE SOUND-ON-SOUND EFFECT Set the controls at their normal positions as given previously, 1. Depress the S ON S (sound-on-sound) EFFECT ON/OFF switch © and note that the S ON S indicator © lights. 2. For repetitive sound-on-sound effects, set the SINGLE DELAY switch © at REPEAT (up) and use the ECHO/S ON S INTENSITY control © to control the number of repetitions. USING THE SINGLE DELAY. When using echo or sound-on-sound effects, setting the SINGLE DELAY switch © at SINGLE (down) will produce only one repetition of the effect. USING REVERBERATION Set the controls at their normal positions as given previously. Set the REVERB VOLUME control © for the desired effect. The four effects: chorus, echo, sound-on-sound, and reverberation can be used alone, or mixed together freely in any combination. 6. Adjust the ECHO/S ON S INTENSITY control © so as to produce the desired number of echo repetitions. CONTROLS AND THEIR FUNCTIONS O INPUT LEVEL INDICATOR Set input level so norma! reading is OdB, with occasional peaks at -*-2dB, 0 BALANCED INPUT Connector (XLR) 16000) + 4dBm input causes INPUT LEVEL INDiCATOR O to read OdB. VOLUME control ©does not affect balanced input. © BALANCED OUTPUT Connector fXLR) (6000) When the INPUT LEVEL INDICATOR O reads OdB, the balanced output will be 4-4dBm. This connector has no relation with the A and B outputs © ©; all effects appear at this output. © UNBALANCED INPUT Jack For guitar, keyboard, microphone, etc. © VOLUME Control Controls input level from UNBALANCED INPUT o © INPUT LEVEL SELECTOR Switch For level matching. Example settings: Microphone: — 50dBm; Guitar: — 25dBm; Synthesizer: OdBm, Mixer: OdBmor -25dBm, © DIRECT SIGNAL Switch When OFF, only the effect signals will appear at the outputs. Use this mode in effect (oops such as with mixer SEND/RETURN jacks. When ON, the direct signal will be mixed with the effect outputs. © CHORUS indicator Lights when the chorus effect is ON. © CHORUS INTENSITY Control Controls the intensity of the chorus effect when ON. © CHORUS ON/OFF Button Depress for ON. © ECHO Indicator Lights when the echo effect is ON. © S ON S (Sound-on-sound) Indicator Lights when the sound-on-sound effect is ON. ® ECHO ON/OFF Button Depress for ON. Ф SONS (Sound-on-sound) EFFECT ON/OFF Button Depress for ON. © ECHO MODE SELECTOR Switch ECHO 1, 2, and 3 are single slap echo modes; ECHO 4, 5, and 6 are multiple slap echo modes. "\HEAD М0!Ж\ 1 2 3 4 5 6 PB1 • • PB2 « • • • PB3 • • • © ECHO/S ON S VOLUME Controi Controls the level of the echo and sound-on-sound effects without affecting the direct sound (when used). © SINGLE DELAY Switch For producing single delay echo and sound-on-sound effects. Double and triple delays will be produced with the ECHO MODE switch ® at 4, 5 or 6 because more than one playback head is being used. © ECHO/SONS INTENSITY Control Controls the number of echo and sound-on-sound repetitions. At about "7” or ''8" ¡"0" = 3 o’clock), self oscillation occurs. Single delays can be produced at SINGLE DELAY. © ECHO/SONS REPEAT RATE Control Controls the time between echo and sound-on-sound repetitions by changing the tape speed, interesting effects can be produced by changing the REPEAT RATE © while producing sound. ©, ®. ©. ©, © CANCEL REMOTE SWITCH Jacks. For remote ON/OFF control of the various effects. © controls ON/OFF of all effects. 21, ©, and © controls ON/OFF of the chorus, echo, and sound-on-sound effects. © allows switching between SINGLE and REPEAT effects. © OUTPUT LEVEL SELECTOR Switch For level matching of the UNBALANCED OUTPUTS © ©. Example of use...