Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you select the TX UPPER part, the indicators of the part select and Group/Category /Variation buttons will light red. If you select the TX LOWER part, the indicators of the part select and Group/Category/Variation buttons will light green. 2. Press the Group/Category/Variation buttons. The program number in the [ ] of the display will change, and a program change message will be transmitted from MIDI OUT. Make sure that the selected Group/Category/Variation and the program number are shown in the display. 25 * Instead of using Group/Category/Variation, you can use the ¡INC/YES] [DEC/NO] buttons to directly specify the program number. When you press the [INC/YES] and [DEC/NO] buttons simultaneously, the setting will be turned off, and program numbers will no longer be transmitted. Example: Selecting the Tone of program number 20 on an external MIDI device program number 20 is transmitted When you select Tone A34 MIDI OUT and the Tone corresponding to program number 20 will be selected. t MIDI IN öö © @ О О 0 0 S£ »das Play the keyboard of the RD-600, and the Tone of the external MIDI device will sound. Selecting a greater number of Tones (Bank Select) By specifying a program number you can select 128 different Tones. However many MIDI instruments have more than 128 sounds. For such instruments, you can select Tones by combining Bank Select messages with Program Change messages. Bank Select messages consist of an MSB (a value 0-127 for controller number 0) and a LSB (a value 0-127 for controller number 32). Some devices recognize the LSB while other devices do not. * Some MIDI devices cannot use Bank Select messages. For details refer to the owner's manual for the MIDI device that you nnsh to connect. Using Bank Select to select a Tone Let's assign Bank Select MSB: 8, LSB: 0, and Program Number 5 to the TX UPPER part. 1. Press the TX UPPER part select button to make the indicator light. 2. Use the PAGE [-*][►] buttons to move the cursor to the Bank Select MSB location. 3.Use the [INC/YES] [DEC/NO] buttons to set the value to 8. Move the cursor -1- fill[OFF] 8- 0 fillC0FF] 0FF-0FF Bank Select LSB can be left at 0, so next you will specify the program number. * If you wish to specify the LSB, use the PAGE [ ■* ][ ► ] buttons to move the cursor to the Bank Select LSB location, and use the [INC/YES] IDEC/NOJ buttons to modify the value. 4.Press the Group/Category/Variation (A15) buttons to select the program number. The program number display in the [ ] of the screen will change, and the Bank Select MSB, LSB and a program change message will be transmitted from MIDI OUT. Й15С 5] 8- 0 fill[OFF] 0FF-0FF 26 Make sure that the selected program number appears in the display. * Instead of using the Group/Categonj/Variation buttons, you can use the [INC/YES] [DEC/NO] buttons to directly select the program number. When you press the [INC/YES] and [DEC/NO] buttons simultaneously, the setting will be turned off, and Bank Select messages will no longer be transmitted. Using settings that you stored (Setup Memory) The RD-600's settings can be stored in a setup memory. This memory remembers the Tones that are assigned to the INT UPPER/LOWER parts, the effect settings, and the program change messages of the TX parts, etc. If you store your favorite settings or settings that are suitable for a particular song, you will always be able to play the RD-600 using those settings whenever you wish. Setup memories are selected using the eight Category buttons and the eight Variation buttons. This means that you can store a total of 64 different setups. For the storing procedure, refer to p.52. Recalling a Setup Memory With the factory settings, setup memories 11-18 already contain settings. Let's try recalling one of these setup memories. © I I DEC/NO INC/YES J L 1 .Make sure that the [EDIT] button indicator is dark. If it is lit, press the [EDIT] button to make the indicator go dark. 2. Simultaneously press the GROUP [A] button and [B] button. All of the Group/Category/Variation button indicators will blink orange. P1 ease be 1 ect-SETUP 3.Use Category 1-8 and Variation 1-8 to select the setup memory that you wish to recall. While the Group/Category/Variation button indicators are blinking orange, the Category and Variation buttons will function to select setups. If you wish to exit this setup selection mode, press one of the Group buttons. You will return to the condition in which a Tone is selected. * For the factory settings of setup memories 11-18, refer to p.28. * If the TX part tone setting is OFF (p.31), TX part tone data will not be transmitted from MIDI OUT when a setup memory is selected. * When a setup memory is recalled, the current settings will be lost. If you wish to keep the current settings, save them to another setup memory beforehand (p.52, Storing various settings in a setup memory). * By setting the System parameter Control Ch. (p.51) you can use one...