Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
If this happens, adjust the Brightness value, (page 28, 31) OWhentheT remolo Depth value is set too low, the effect may not be obtained even if the T remolo Depth has been assigned to the controller. If this happens, change the Tremolo Depth to an appropriate value, (page 28, 30) ■ When using an external sound module • No sound is heard. □ Is the volume of the external sound module too low? □ Is the TX (Transmit) Channel set correctly? (page 42) □ Are the UPPER/LOWER buttons (in the TX CONTROL section) on? (page 41) □ Are the TX LOWER/TX UPPER Parts set to appropriate levels? (page 41) U When the TX/INT button is set to OFF (TX) setting the TX/INT LEVEL Slider to the MIN position will mute the external sound module, (page 41) 60 □ When Control Change #7 (Volume) is assigned to the C1 Slider or Pedal, check the position of the Slider or Pedal, (page 27,45) • The pitch is strange. □ Is the Transmit Transpose function for the TX LOWER/TX UPPER Part set correctly? (page 21,51) □ Check the Pitch Bender and its setting, (page 10) □ When Bend Up/Down or Control Change #1 is assigned to the Pedal or C1 Slider, check the position of the Pedal or Slider, (page 27,45) • Program Change/Bank Select messages cannot be output. □ Are Program Change/Bank Select set to OFF? (page 43,44) □ Are the LOWER/UPPER buttons (in the TX Control section) off? (page 41) □ Is the TX channel set correctly? (page 42) ■ When using a Sequencer • The sequencer will not record a performance. □ When the Local Switch is set to ON1, performance data of the INT LOWER/INT UPPER Parts is not output through MIDI OUT. To record such data, set the Local Switch to ON2 or OFF. (page 34,39,40) • The channel on which data is recorded does not respond. □ Are the RX and TX channels set correctly? (page 34,42) □ When the Local Switch is set to ON2 or OFF, performance data of the INT LOWER/INT UPPER Part(s) is output on the RX channel, and data of the TX LOWER/TX UPPER Part(s) is output on the TX channel through MIDI OUT. To record only the performance data of the INT LOWER/INT UPPER Part(s), set the LOWER/UPPER button(s) (in the TX Control section) OFF. (page 39,40) • Sounds are doubled or played improperly. □ When the sequencer's SOFT THRU function is on and the Local Switch of the RD-500 is set to ON2, the internal sound module of the piano will sound twice. Set the Local Switch to OFF. (page 34) ■ In the Multi Timbral Mode • No sound is heard. □ Is the RX channel of each Part turned OFF (0) ? (page 56) □ Is the RX channel of each Part set correctly? (page 56) □ Is the level of each Part set appropriately? (page 56) □ If the RD-500 is not set to the Multi Timbral mode, only two Parts (INT UPPER and INT LOWER) will be played, (page 55) • If the unexplained/inevitable occurs! □ If/when something unexpected happens — like someone tripping over a MIDI cable, thereby disconnecting it right in the middle of your solo — the RD-500 may produce some really strange sounds! When this happens (and it will!) quickly activate the PANIC function; press the FUNC and DEC buttons simultaneously. This will instantly kill any sound the piano may be making. (Remember: in a crowded club this function may be your only friend!) 61 Digital Piano Date : Dec. 10, 1993 Model RD-5oo MIDI Implementation Chart version m oo Function... T ransmitted Recognized Remarks Basic Channel Default Changed 1,2 1—15 1,2 1—15 Memorized Mode Default Messages Altered Mode 3 X ************** Mode 3 X Note Number : True Voice 3 — 125 ************** 0—127 0—127 Velocity Note ON Note OFF о о 0 О After Touch Key's Ch’s X х*2 X 0 Pitch Bend О 0 9 bit resolution 0 — 95 О Control Change 1 6,38 7 10 11 64 66 67 91 93 0 0 О О 0 о 0 0 о 0 Modulation Data Entry Volume Panpot Expression Hold 1 Sostenuto Soft Reverb Chorus 100, 101 121 X X 0 0 RPN LSB, MSB Reset All Controllers Prog Change : True # 0*1 ************** о 0—114 System Exclucive О о System Common : Song Pos : Song Sei : Tune X X X X X X System Real Time : Clock : Commands X X X X Aux Message : Local ON/OFF : All Notes OFF : Active Sense : Reset X X о X О 0(123 — 127) О X Notes *1 Can be set to O or x manually. *2 Can be assigned to the Pedal / C1 slider. Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO 62 О : Yes X : No SPECIFICATIONS RD-500 : Roland Digital Piano • Keyboard 88 keys (Weighted-counterlever mechanism) • Maximum Polyphony 28voices • Tone Groups GRAND1, GRAND2, E.GRAND,MKS-20, RHODES, E.PIANO, CLAV/HARPSI, ORGAN, SYNTH, STRINGS, BASS, PERCUSSION Total 121 variations (including 1 Rhythm set) • Setup Memory Preset: 1 User: 31 • Effects Chorus, Reverb, Equalizer • Connectors Output Jacks (L (MONO) / R) Fixed Output Jacks(L/R) Pedal Jacks (DAMPER / INT+TX,TX) MIDI Connectors (In, Out, Thru) Headphone Jack (Stereo) • Power Supply AC117V, AC230V or AC240V • Power Consumption 16W(AC117V), 17W (AC230V, AC24...