Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Spread out the tripod legs. Secure the legs in the fully opened position. Attaching the Percussion Pad 1. Disengage the stand holder. Loosen r I 2. Attach the stand holder to ê the percussion pad. Y I it I 3. Attach the assembly from Step 2 to the stand. Tighten 4 mm hexagonal wrench Bolts (M5 x 35 mm) (§jj—mi @ mat @ (jJpamiE (§ ©ma® ( * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice. Copyright © 2002 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner's manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. USING THE UNIT SAFELY INSTRUCTIONS FOR THE PREVENTION OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS About A WARNING and A CAUTION Notices About the Symbols Awarning Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. A caution Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. * Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well to domestic animals or pets. A The ^ symbol alerts the user to important instructions or vvarnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. The 0 symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled. £ The • symbol alerts tine user to things that must be carried out. The specific tiling that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet. ALWAYS OBSERVE THE FOLLOWING Awarning Before using this unit, make sure to read the instructions below, and the Owner's Manual. A Do not attempt to repair the unit, or replace parts within it (except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the "Information" page. Never use or store the unit in places that are: • Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are • Damp (e.g., baths, washrooms, on wet floors); or are • Humid; or are • Exposed to rain; or are • Dusty; or are • Subject to high levels of vibration. Make sure you always have the unit placed so it is level and sure to remain stable. Never place it on stands that could wabble, or on inclined surfaces. 0 © In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. A A caution This stand intended for use only with the following pads or drum modules; PAD-8, PAD-80, HPD-15, PM-16, SPD-6, SPD-8, SPD-11, SPD-20, TD-5, TD-6, TD-8 and TD-10. Use with other apparatus is capable of resulting in instability causing possible injury. A Never climb on top of, nor place heavy objects on the unit. Make sure to firmly tighten all bolts and bolts after you have assembled the stand and attached a pad or unit to it. You should probably also try to make a habit of checking and retightening them if necessary before every performance. You risk injury if you have loose screws or clamps, since a pad or unit can fall unexpectedly. When setting up or storing the tripod stand, be careful not to pinch the fingers you use to handle the stand. o A • Should you remove the bolts included or screw's, make sure to put them in a safe place out of children's reach, so there is no chance of them being swallowed accidentally. IMPORTANT NOTES In addition to the items listed under “USING THE UNIT SAFELY,” please read and observe the following: To prevent accidents, never allow small children to play near A K Maintenance the stand. A For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoro...