Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Q l™| SYNTHESIZER —J V CU 1_I Owner’s Manual introduction Thank you for purchasing the Roland JV-80 Multi Timbral Synthesizer, To take full advantage of the JV-80’s functions, and to enjoy long and trouble-free use, please read this owner’s manual carefully. Copyright © 1991 by ROLAND CORPORATION All rights reserved. No part o'f this publication may be reproduced in any form without the permission of ROLAND CORPORATION. HOW TO USE THIS MANUAL This manual consists of the following sections describing the respective modes of the JV-80. Though we recommend that you take time to read through this entire manual once, those who have a general knowledge about synthesizers can read the desired sections as needed when using the instrument. Section 1 : Setting Up and Flaying the JV^80 This section covers preparation before play, ROM Play operations, connection to external devices, and .trying out the various sounds of the JV-BO. Section 2 : General Overview This section covers the structure of the sound sources of the JV-80, and Patches and Performances, which are the units of sound. Section 3 : Play This section covers the operations for using the JV-80 in the Play mode (Patch Play/Performance Play) and describes the functions of the parameters related to this mode. Section 4 : Edit This section covers the operations of the modes (Patch Edit/Performance Edit/Rhythm Edit) which are used to edit sound program data (Patch/Performance/Rhythm Tone), and describes the functions of parameters related to these modes. Section 5 : Command This section covers the operations and functions of the Write mode, which Include the storing of edited data and organization of the data. Section 6: Reference This section includes a list of error messages, a sound program data list and MIDI implementation. Also, an Index of operations and the main Index will help you in using this manual. By using the index of operations, you can quickly find the pages that contain information about the operations and functions you want to know about #The explanations contained in the pages you refer to have been made as comprehensive as possible. Since many functions and operations throughout the JV-80 are quite simitar, you may find repetition of the same or similar information in several sections. #in the Play section and the Edit section, concrete application examples are given before explanation of the parameters of a function and the method for operating and setting them. (An asterisk it indicates the examples.) The resulting sound applications in using the parameters (and the effective ways of setting them) are given at the beginning of each section of Patch/Performance in the Play section and at the beginning of each item of Patch/Performance in the Edit section. Following these explanations, the basic functions of each parameter are explained. ■ Pane! Indications The buttons and switches used in operation are referred to in this manual just as their names appear on the panel, printed above (or below) each button. (Example] Chorus button —-I CHORUS | Tone switch -»I tone switch j Cursor buttons — The parameter names are expressed as (¡523*1 or . Since they are usually given as abbreviations, the full names are written next to them; for example, “key mode” and “chorus rate." Then the editable range of the parameter is given: for example, 0—127 for a continuous one, or - 100/ - 50/0/50/100 for specified (step) ones. ■ Display The various functions of the instrument are accessed through the display. Piease keep in mind that there may be slight differences between the data (like in sound program names) in factory settings and the displays shown in the manual. ChoRate 4 CONTENTS ■ MAIN FEATURES OF THE JV-80................ 7 ■ IMPORTANT NOTES............................. 8 ■ PANEL CONTROLS AND TERMINALS.......... 8 SECT!ONI SETTING UP AND PLAYING THE JV-80 1. CONNECTING THE JV-80 TO EXTERNAL EQUIPMENT..............12 2. TURN THE POWER ON ........................13 ■ Adjusting the Comrast of the LCD................14 3. LISTENING TO THE ROM PLAY FEATURE - - • • 15 4. PLAYING THE JV-BO......................- - - • 17 ■ Trying Out the Realtime Performance Functions •••18 ■ Switches..................................-— 19 [ SECT1QN2 GENERAL OVERVIEW OF THE JV-SO 1. MODES.......................................•■■ 22 2. TWO TYPES OF SOUND UNITS (PATCHES AND PERFORMANCES)......23 ■ PatchBs and Tones...........................* ■ 23 ■ Performances and Patches......................24 3. SOUND SOURCE AND CONTROLLERS.......25 4. ORGANIZATION OF THE SOUND SOURCE • •27 ■ Internal.Sound Source..........................27 SECTIQN3 PLAY PLAYING PATCHES............................30 ■ What is the Patch Play mode?...................30 ■ Parameters Available for RealtimB Control........31 ■ Operation......................................33 • Selecting the Patch Play Mode...............33 • Changing Patches................