Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If you want to return all parameters of the selected rhythm set to the preset state, simply re-select the preset rhythm set from which you started editing. The Initialize operation applies only to the currently selected tone; it will not change the content of other sounds stored in user memory. If you want to restore all settings to the factory-set condition, execute the Factory Reset operation (p. 17). 1. Press [PATCH] so it is lit and you are in Patch mode. 2. Select the rhythm set that contains the rhythm tone you want to initialize. 3. Press [UTILITY]. 4. Use PAGE/CURSOR [ ]/[ ] to select “2:RHY INITIALIZE.” 5. Press [ENTER]. 6. Use VALUE [-]/[+] to select the rhythm tone that you want to initialize. VALUE: A 0 (key#21)–C 8 (key#108) You can also press a key to select the rhythm tone to edit. 7. Press [ENTER] once again to execute. When initialization is finished, the display will indicate “COMPLETED.” This ends the procedure. Erasing a rhythm set you saved (RHY REMOVE) This operation erases the specified user rhythm set. When you erase a rhythm set, it will no longer be possible to select the rhythm set of that number. If you newly save a rhythm set in that number, you will again be able to select it. 1. Press [PATCH] so it is lit and you are in Patch mode. 2. Press [UTILITY]. 3. Use PAGE/CURSOR [ ]/[ ] to select “3:RHY REMOVE.” 4. Press [ENTER]. 5. Use VALUE [-]/[+] to select the user rhythm set that you want to erase. 6. Press [ENTER]. When the data has been erased, the display will indicate “COMPLETED.” This ends the procedure. Refer to Creating a Patch (Patch Mode) (p. 51) about Transmitting patch/rhythm settings from the MIDI OUT connector (XFER to MIDI), or Restoring the factory settings (FACTORY RESET). Playing more than one sound simultaneously (Performance mode) Choosing a part and selecting the sound A performance contains sixteen parts that let you play different sounds simultaneously. Here’s how to switch parts and assign a patch (or rhythm set) to each part. 1. Press [PERFORM] so it is lit and you are in Performance mode. 2. Press [PART SELECT] so it is lit, and use [0]–[9] to select a part. Press [0] to select part 10 (Rhythm). To select the parts 11–16, hold down [SHIFT] and press [1]–[6] (p. 43). 3. Use VALUE [-]/[+] to specify a patch or a rhythm set for the part. You can also select a patch using the [NUMERIC] function. Assigning patches of the same category to multiple parts While [PART SELECT] is lit, you can hold down [SHIFT] and use PAGE/CURSOR [ ]/[ ] to step through the categories assigned to each part, selecting patches of the previous or next category group regardless of the button that is selected. This lets you assign patches of other categories than printed on the panel to each part. For example, if you want to prepare multiple patches of the same category, such as two types of organ, you can use the above method to select organ patches for a category that you do not use. Quickly and consecutively auditioning the built-in sound of the JUNO-D / Viewing a list of just the user patches Using the above procedure, you can listen consecutively to all the built-in sounds of the JUNO-D without pressing a category select button. Among the user patches organized into category groups, you can also view a list of just the user patches. Hold down [SHIFT] and press [ ] to switch categories, and after the “Bass” category you will see the user patches (u001–u128) displayed as a category. * Only when viewing a list, the “u” at the beginning of user patch numbers will be displayed as a lowercase character. Selecting performance numbers Press [PART SELECT] so it will go out. Using VALUE [-]/[+] Pressing VALUE [-]/[+] will select the performance that precedes or follows the currently selected performance. You do not need to press [ENTER] after making your selection. The number you select will take effect immediately, and the performance will be selected. Using the direct access buttons • When not using the [NUMERIC] function Use the [0]–[9] buttons to input a number. The upper digit will remain fixed, and only the lower digit will change. This is a convenient way to step through the numbers in succession. You do not need to press [ENTER] after making your selection. The number you select will take effect immediately, and the performance will be selected. • When using the [NUMERIC] function 1. Press [NUMERIC] so it is lit. 2. Use the [0]–[9] buttons to input a two-digit number. The indication will blink. 3. If you want to finalize the value, press [ENTER]. The value will be finalized, and [NUMERIC] will go out. If you decide to cancel, press [EXIT]. User performances will be displayed after the end of the preset performances. You can hold down [SHIFT] and use PAGE/ CURSOR [ ]/[ ] to switch between display of user and preset performances. Editing the settings of a performance The performances of the JUNO-D contain settings that are made for the entire performance, and settings that are made indi...