Оценок - 2, средний балл: 3.5 ( )

Производитель: Roland Размер: 697.06 kb Название файла: Язык инструкции:

1] Transposing C to E key —» While holding the Key Transpose Button down, push the $ Buton four times. KEY piano TRANSPOSE ? ? 3 (While holding down) r‘ G g' a a' b c c‘ d d’ e f b button # button f’ G G* A a' B C c* D d' E F • button + □ □□ [e.g. 2] Transposing E to G key —* While holding the Key Transpose Button down, push the • Button once to return to C key, then without releasing the Transpose Button, push the b Button five times. (While holding down) Push as many times as necessary. While you are taking the transposing procedure, the piano cannot be played. + b • i □ □ □ (While holding down) Push " •" button, once, then " b ” button five times. F’ G G* A A* B C C’ D D' E F 9 2j SETUP WITH AUXILLARY AUDIO EQUIPMENT • Input Jacks The external input jacks are provided for connecting the outputs of other electronic instruments (rhythm machines CR-1000, TR-626 or sound module MT-32, etc.) to the internal speakers and amplifier of the Roland Piano. A level switch is also provided to match the output of the device(s) to the input of the speaker/amplifier. Usually, the switch should be set to the high (H) position. However, if you detect audible distortion through the speakers, select either the middle (M) or low (L) position. • Output Jacks These Output Jacks are provided for connecting the Roland Piano to larger sound systems such as a home stereo system, multi-track recorders, mixers, and/or auxiliary instrument amplifiers. As with the input Jacks, the Output Jacks have a three-way switch for setting the output leivel. The Output Jacks can be used in a stereo or monoural configuration. © Turn down the volume of the external amplifier connected to the piano. © Connect the Output Jacks of the piano to the Line In's (e.g. AUX) of the amplifier. (D Adjust the volume of the piano with the Output Level Switch (see page 3). © Adjust the volume of the amplifier. * Connecting the headphone plug to the headphone jack will disconnect the internal speakers. 10 3 MIDI Part of the power of your Roland Plano is in the use of the MIDI (Musical Instrument Digital Interface). To learn more about MIDI and the various music systems that can be added to your HP-Piano, refer to the enclosed booklet "MIDI'' and the MIDI implementation chart in the back of this owner's manual. 1. MIDI Connectors The Roland Piano has MIDI IN, MIDI OUT and MIDI THRU Connectors on the rear panel. 2. Setting MIDI Channels The Roland Piano cannot have different MIDI channels for transmitting and receiving. While holding the MIDI Button down, push the key that corresponds to the MIDI Channel number you want. (See page 15.) KEY TRANSPOSE MID MID OUT Con m IN Connector T lector к MIDI THRU Connector Push the key which corresponds to the MIDI channel you want. (holding down) • MIDI IN Connector * Usually, the default setting for receive channel is When using the piano as a MIDI sound module OMNI OFF, and transmit channel is CH 1. controlled by the external MIDI device, connect the MIDI IN Connector to the MIDI OUT or MIDI THRU on the external device. • MIDI OUT Connector When using the piano as a keyboard controller that drives the external device, connect the MIDI OUT Connector to the MIDI IN on the external device. • MIDI THRU Connector Through this, the exact copy of the signal fed into the MIDI IN is sent out. 11 3. Program Change a. Transmit The Roland Piano can send the Program Change in the following two different ways; with the Tone Selector buttons or with the keyboard. Program change messages 1 to 8 can be transmitted in either way, but 9 to 128 can be transmitted in the later way. ► Using the Program Change Button and Tone Selectors Using the Program Change Button and the Tone Selectors 1 to 8, Program Change messages can be transmitted. While holding the Program Change Switch down, press one of the Tone Selector buttons <1 to 8). In this way, the corresponding Program Change 1 to 8 can be transmitted. PIANO HARPSI- VIBRA- £ PIANO 1 2 3 CHORD CLAVI PHONE I 2 b • I ■ ■ ■ ■ I— ■ ■ w ■""VSÜT»"« ......■■—■Il— * 11 >M|'| f i PH [ l \ I i l f i r i 1 1 PROGRAM 1 2 3 4 5 6 7 B CHANGE ___ rt b (While holding down) ► Using the Key Transpose Button and Keyboard Using the Key Transpose Button and keyboard, 1 to 128 Program Change messages can be trasmit-ted. The upper right table shows how the Group/ Bank/Voice numbers on the piano correspond to the Program numbers. Program Change Table GROUP v. BANK \ 1 2 3 4 5 6 7 8 1 1 2 3 4 5 6 7 8 2 9 10 11 12 13 14 15 16 3 17 18 19 20 21 22 23 24 4 25 26 27 28 29 30 31 32 A 5 33 34 35 36 37 38 39 40 6 41 42 43 44 45 46 47 48 7 49 50 51 52 53 54 55 56 8 57 58 59 60 61 62 63 64 1 65 66 67 68 69 70 71 72 2 73 74 75 76 77 78 79 80 3 81 82 83 84 85 co co 87 88 B 4 89 90 91 92 93 94 95 96 5 97 98 99 100 101 102 103 104 6 105 106 107 108 109 110 111 112 7 113 114 115 11...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: