Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
This battery should, as a rule, be changed every 5 years. (The actual lifetime of the battery may vary depending on the conditions of use.) When it is time to replace the battery, check with your nearest Roland Service Station. [Additional Precautions] • Be careful not get your fingers caught when closing the lid. Special arrangements may need to be mode for children. To close the lid, slowly puli it completely forward, then lower it gently. • Never allow any foreign objects to enter the unit through any of its openings. • Protect the unit from strong impact. 9 Do not allow objects or liquids of any kind to penetrate the unit. In the event of such an occurrence, discontinue use immediately. Contact qualified service personnel as soon as possible. • Before using the unit in a foreign country, consult with qualified service personnel. 5 1. Getting Started Turning Power On (T) Insert the plug on the power cord into an outlet. Rear Panel © Turn the power switch on. (Press the POWER button at the left side of the panel.) On Off * This unit is equipped with a circuit protection device. A brief interval after power up is required before the unit will operate. Using Headphones To use headphones, insert the plug into the jack located at the left side of the instrument. * HP-37nn nwnprs ran (J^^_rr|_rTT: hang the headphones OB on the nook provided. r * The un you ha playint not Wc * Use th ume if Headphones I hook JJ H l it's speakers will no longer produce sound once ve headphones connected. This is convenient for 3 the keyboard in circumstances where you do int to disturb others, such as late at night. e VOLUME knob on the panel to adjust the vol-necessary. Adjusting the Volume. The VOLUME Slider The further the slider is moved toward "MAX" the greater the volume becomes. Volume is lowered as the slider is moved toward "MIN." VOLUME MIN_MAX IT Adjusting the Brilliance of the Sound. The BRILLIANCE Slider The sound becomes brighter as the slider is moved to the right (toward BRIGHT). When moved to the left (toward MELLOW) the sound becomes more relaxed and mellow. BRILLIANCE MELLOW_T_BRIGHT KEY TEMPERA-TRANSPOSE MENT PIANO 1 PIANO 2 HONK't TONK Selecting the Timbre The voice Buttons Press one of the Voice buttons to select the sound that you want. Timbre PIANO 1 A thick, rich concert grand piano sound. PIANO 2 The timbre produced by a somewhat smaller grand piano. HONKYTONK The sound of a piano on the verge of going out of tune, and as such having a bright, pleasant familiarity. HARPSICHORD A distinctively sensitive and refined harpsichord sound, indispensable for baroque themes. VIBRAPHONE The sound of a large vibraphone. E. PIANO (Electric Piano) Provides the timbre of a luminous, transparent electric piano. [About DUAL] The DUAL function allows two different sounds to be combined and played simultaneously. You may wish to experiment with the creative possibilities afforded by the sound mixtures that can be obtained. To mix sounds, simple press any two Voice buttons simultaneously (such as PIANO 1 and HARPSICHORD). * Regarding the treatment of effects when the DUAL mode is being used: The settings for effects pertaining to the left one of the two Voices selected will be active. B 1. Getting Started Applying Reverberation to the Sound Reverberation, creates a sense of spaciousness, and conveys the realistic presence an instrument would have in one of 3 different environments. The Reverb effect is made active by pressing one of the REVERB buttons (ROOM/STAGE/HALL). The indicator for the button will light. The REVERB Button To select the Depth of the reverberation, hold down one of the REVERB buttons while you use the VALUE buttons to choose from the 8 levels that are available. ▲ Deepens the Reverb effect. (Standard -»level +3) ▼ Provides a more shallow Reverb effect. (Standard -* level -4) * To set Reverb at the standard Depth, simultaneously press both A and ▼. The Reverb effect is turned off by pressing one of the REVERB buttons again. Its indicator will go out. * Once a Reverb setting is made, it will apply to any voice which is selected. ROOM Provides the ambience that would exist when playing in a room that is "live," that is, reverberates well. STAGE Provides the feeling of presence that would be obtained if playing on stage in a small hall. HALL Provides the reverberation of a concert hall. HARPSI- VIBRA- E. PIANO CHORUS CHORD PHONE I LJ I I ~ I I “ I n TREMOLO RFVFRR VAI I IF DEMO Using the Chorus Effect to Add Breadth The CHORUS Button The Chorus effect is made active by pressing the CHORUS button. The indicator for the button will light. Further, if you press a VALUE button while the CHORUS button is held down, you can select the particular Depth for the Chorus effect that you wish, from among the 8 levels provided. ▲ Deepens the Chorus effect. (Standard -» level +3) ▼ Provides a more shallow Chorus effect. (Standar...