Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
On an acoustic piano, holding down the damper pedal will cause the strings for notes other than the ones you actually play to vibrate in sympathy with what you’ve played, producing a rich resonance. The FP-4 simulates this sympathetic vibration (damper resonance). Set the switch on the included pedal to “Continuous” when the pedal is connected. Sostenuto Pedal The notes you are pressing when this pedal is depressed will be sustained. With the pedal connected to the Sostenuto / (FC1) jack, it can be assigned other functions as well. Refer to “Changing How the Pedals Work” (p. 82), “Using a Pedal to Switch Registrations” (p. 64). Soft Pedal This pedal is used to make the sound softer. Playing with the soft pedal depressed produces a sound that is not as strong as when otherwise played with the equivalent strength. This is the same function as the left pedal of an acoustic piano. The softness of the tone can be varied subtly by the depth to which you press the pedal. With the pedal connected to the Soft / (FC2) jack, it can be assigned other functions as well. Refer to “Changing How the Pedals Work” (p. 82), “Using a Pedal to Switch Registrations” (p. 64). Listening through Headphones Listening through Headphones You can use headphones to enjoy the FP-4 without disturbing those around you, such as at night. Since the FP-4 has two headphone jacks, two people can also use headphones simultaneously. If you’re using only one set of headphones, you may connect them to either of the two headphone jacks. Headphones 1. Plug the headphones into the Phones jack. If headphones are connected, no sound will be output from the FP-4’s speakers. 2. Use the FP-4’s [Volume] knob (p. 17) to adjust the headphone volume. Cautions when Using Headphones • To prevent damage to the cord’s internal conductors, avoid rough handling. When using headphones, mainly try to handle either the plug or the headset. • Your headphones may be damaged if the volume of a device is already turned up when you plug them in. Minimize the volume before you plug in the headphones. • Excessive input will not only damage your hearing, but may also strain the headphones. Please enjoy music at an appropriate volume. • Use headphones that have a stereo 1/4” phone plug. s Listening to Demo Songs Now, try listening to demo songs. The FP-4 comes with eight demo songs. The six Tone buttons, the [Session Partner] button, and the [Play] button are each assigned one demo song. Button Indication Composer/Copyright Piano Masasi & Kazuko Hirashita / © 2006 Roland Corporation E.Piano Masasi & Kazuko Hirashita / © 2006 Roland Corporation Organ Masasi & Kazuko Hirashita / © 2006 Roland Corporation Strings/Pad Masasi & Kazuko Hirashita / © 2006 Roland Corporation Guitar/Bass Masasi & Kazuko Hirashita / © 2006 Roland Corporation Voice/GM2 Masasi & Kazuko Hirashita / © 2006 Roland Corporation Session Partner © 2006 Roland Corporation Play Masasi & Kazuko Hirashita / © 2006 Roland Corporation NOTE NOTE All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. No MIDI data for the music that is played will be output. Listening to Songs Listening to Songs . Hold down the [Function] button and press the [Transpose] button. The indicators for the six Tone and [Function], [Transpose], [Session Partner] and [Play] buttons flash. The following appears in the display. NOTE You can’t play back the demo songs if your recorded performance has not been saved. Either erase your performance (p. 26), or save your recorded performance (p. 76). 2. Press one of the six Tone buttons, the [Session Partner] button, or the [Play] button. The songs will play consecutively, starting with the demo song you selected. The button for the song currently being played back flashes on and off. When playback of the last song is reached, playback continues by returning to the first song and playing that again. The display will show the name of the currently playing demo song. 3. To stop playback, press the flashing button. 4. Press the [Function] button or the [Transpose] button to exit Demo mode. The indicators return to their previous state. A demo song will not play if you press an unlit button. Listening to Songs Listening to Internal Songs Listening to Songs Listening to Internal Songs The FP-4 contains 65 built-in songs. Here’s how to select and play back one of these songs. About the name of the internal song, refer to “Internal Song List” (p. 124). Selecting a Song 1. Press the [Display] button several times so it’s lit in green. The following appears in the display. Each time you press the [Display] button, the display will alternate between showing the currently selected tone number, the currently selected song number (a “U” or “P” is shown before the number), the currently selected rhythm number (an “r” is shown before the number), and tempo. If you press the [Display] button while using Session Partner, the rhythm n...