Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(*1): We recommend using one input jack (i.e., either the LINE jack or the MIC/GUITAR jack) at a time. If devices are connected to both jacks at the same time, the sound input via both jacks is mixed together, but the DUO-CAPTURE cannot adjust the balance of the mix. n Note Do not connect the DUO-CAPTURE to the computer until you are directed to do so. A “driver” is software that transfers data between the DUO-CAPTURE and application software running on your computer, when your computer and the DUO-CAPTURE are connected. 1. Start up the computer without the DUO-CAPTURE connected Disconnect all USB cables other than those for a USB keyboard and/or USB mouse (if used). Windows Log on to the computer with a user account that has administrator privileges. 2. Exit all applications that are running 3. Insert the included CD-ROM into the CD-ROM drive Windows7/WindowsVista If the AutoPlay dialog box appears, click [Open folder to view files]. 4. Double-click the following file on the included CD-ROM and start the installer Refer to the Roland website for information about drivers and compatibility with the latest operating system versions. Windows Mac OS X Operating System File Windows [Setup] in the [Driver] folder Mac OS X [DuoCapture_USBDriver.mpkg] in the [Driver] folder WindowsMac OS X users: continue from p. 10 users: continue from p. 13 Driver Installation 5. When a confirmation screen regarding user account control appears, click [Yes] or [Continue] 6. When “The DUO-CAPTURE Driver will be installed on your computer ” appears, click [Next] 7. Click [Next] again If a dialog box regarding Windows security appears, click [Install]. If the “Software Install” dialog box appears, click [Continue] to proceed with the installation. If you cannot proceed, click [OK] to cancel the installation. Change the settings as Driver Installation 5. When a confirmation screen regarding user account control appears, click [Yes] or [Continue] 6. When “The DUO-CAPTURE Driver will be installed on your computer ” appears, click [Next] 7. Click [Next] again If a dialog box regarding Windows security appears, click [Install]. If the “Software Install” dialog box appears, click [Continue] to proceed with the installation. If you cannot proceed, click [OK] to cancel the installation. Change the settings as described in “Driver Signing Options Setting (Windows XP)” (p. 22) and try installing again. 8. When “Ready to install the driver ” appears, connect the DUO-CAPTURE to the computer using a USB cable * Turn down the volume on any peripheral devices before connecting the USB cable It may take several minutes for the driver to be installed. If other messages appear, follow the instructions on the screen. The driver will be installed automatically. “Found new hardware” will appear in the lower-right corner of the screen. users: continue from p. 11 users: continue from p. 12 Windows Windows7/WindowsVista WindowsXP Windows7/WindowsVista WindowsXP Windows7/WindowsVista WindowsXP Driver Installation Windows7/WindowsVista 9. When “Installation has been completed ” appears, click [Close] Close the "DUO-CAPTURE Driver Setup" dialog box. 10. Open the “Control Panel,” click [Hardware and Sound], and then click [Sound] If you have selected Icon view or Classic view, double-click [Sound]. 11. Click the [Playback] tab, select the DUO-CAPTURE’s [OUT], and then click [Set Default] 12. Click [OK] Driver Installation Windows7/WindowsVista 9. When “Installation has been completed ” appears, click [Close] Close the "DUO-CAPTURE Driver Setup" dialog box. 10. Open the “Control Panel,” click [Hardware and Sound], and then click [Sound] If you have selected Icon view or Classic view, double-click [Sound]. 11. Click the [Playback] tab, select the DUO-CAPTURE’s [OUT], and then click [Set Default] 12. Click [OK] Proceed to p. 14 If you cannot select the DUO-CAPTURE, refer to “Using the DUO-CAPTURE” (p. 18). If the DUO-CAPTURE is selected as the output device, the computer’s audio alerts will be played using the DUO-CAPTURE; they will not be heard from the computer’s speakers. 11 Driver Installation WindowsXP 9. If a dialog box that asks whether you want to connect to Windows Update appears, select [No, not this time] and click [Next] 10. Select [Install the software automatically (Recommended)] and click [Next] 11. If the “Hardware Installation” dialog box appears, click [Continue Anyway] to proceed with the installation 12. When “Completing the Found New Hardware Wizard” appears, click [Finish] 13. When “Installation has been completed ” appears, click [Close] to close the “DUO-CAPTURE Driver Setup” dialog box If the “Change System Settings” dialog box appears, click [Yes] to restart Windows. 14. Open the “Control Panel,” click [Sounds, Speech, and Audio Devices], and then click [Sounds and Audio Devices] If you have selected Classic view, double-click [Sounds and Audio Devices]. 15. Click the [Audio] tab and select [OUT (DUO-CAPTURE)] in ...