Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
2. Place the fader for track 1 at the location shown below. 3. Use the repeat function to repeat the playback of the song and adjust the volume of the input source using the INPUT LEVEL knob. Listen to the track you will be re-recording and the input source and adjust the volume of the input source so that it is the same level as the track. 4. Press AUTO PUNCH [ON/OFF]. The indicator lights, showing that the auto punch in and out have been set. 5. When you are ready to record, hold down [REC] and press [PLAY] to begin recording. After you press [REC], you can record from the time the first punch-in is reached until the time the punch-out is reached. Re-record the portion as desired. When the song is repeated, you can check the result of what you just recorded. If the recording is not satisfactory, press [REC] and perform the recording again. 6. Press [STOP] to stop recording. * During automatic updating, “Keep Power On!” appears in the upper line of the display, while the lower line shows what is being processed. 7. Press [REPEAT] to make the button indicator go dark. 8. Press AUTO PUNCH [ON/OFF] to make the indicator go dark. Registering time—Locator Function Registering time—Locator Function Using the locator function, you can register any desired time Registering a locator point in a song as a “locator point ” so that you can jump to that point later with just the press of a button. 1. At the Play screen, move to the location where you This function is quite useful during editing. want to register the locator point. 2. Press [LOCATOR]. When the [LOCATOR] indicator lights up, registration is complete. Moving to the locator point Press [LOCATOR] to move to the time in the song registered as a locator point. Deleting a locator point Press and hold AUTO PUNCH [ON/OFF], then press [LOCATOR] to delete the locator point. Advanced 49 Editing the performance on a track (Track Editing) Editing the performance on a track (Track Editing) The BR-532 allows you to edit your songs by performing editing functions such as copying and moving data recorded on the tracks. Choosing to specify in terms of measures rather than time During Track Editing, if you press PARAMETER [ ] several times in screens where specification of a measures value is expected (“Start” “End” “To”), you can switch to a screen where the specification can be made in terms of time. Data is saved in its edited form when you return to the Play screen from the Track Edit screen. * During automatic updating, “Keep Power On!” appears in the upper line of the display, while the lower line shows what is being processed. Copying recorded data (Track Copy) Track Copy allows you to copy a specific part of recorded data and then place it in a different location. You can perform editing operations such as copying the recorded data on a track all at once, or copying the recorded data from a specified part as many times as you wish. If, for example, you want to use a phrase from a certain track, or have the same phrase repeated again and again, the copy function will help save you time. To copy recorded data, align the beginning of the data being copied to the position where you want it placed. * If data exists at the position being copied to, that data will be overwritten. * The portion being copied must be longer than 1.0 seconds long. If the copied portion is 1.0 seconds or less, no sound will be heard even if the copy is carried out. The three types of Track Copy are given below. Copying the repeated portion (AB) Perform the procedure given below to copy the portion from the repeat start (A) to the repeat end (B). Ex. 1: Copying twice to the same track Repeat Repeat TO Time Start (A) End (B) Ex. 2: Copying twice to another track Repeat Repeat TO Time Start (A) End (B) Editing the performance on a track (Track Editing) 1. Press [UTILITY]. 2. Press PARAMETER [ ] [ ] to move the cursor to “TRK,” and press [ENTER]. 3. Press PARAMETER [ ] [ ] to move the cursor to “CPY,” and press [ENTER]. 4. Turn the TIME/VALUE dial to select “AB” and press [ENTER]. 5. Press PARAMETER [ ] [ ] to move the cursor, and turn the TIME/VALUE dial to select the track/V- Track to copy from, and track/V-Track to copy to. 6. Press [ENTER]. 7. Press PARAMETER [ ] [ ] to move the cursor, and turn the TIME/VALUE dial to specify the time of the beginning of the location where you want the copied data to be placed. 8. Press [ENTER]. 9. Turn the TIME/VALUE dial to select the number of copies you want to be placed. 10. When you are ready to execute the copy, press [ENTER]. The display will ask “Are you sure?,” so that you can confirm the operation. 11. Press [ENTER]. The copy is executed. 12. Press [EXIT] several times to return to the Play page. Copying by specifying the time (TIME/MES) Perform the procedure given below to copy the portion between specific times. Ex. 1: Copying twice to the same track START END TO Time Ex. 2: Copying twice to another track START END TOTime 1. Press [UTILITY]. 2. Pr...