Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
This can be used to connect the GK-1 or a G-Series Guitar Controller (G-707, G-202, G-303, G-505 or G-808) to the GR-50. Please read this owner's manual carefuly before using the BC-13. ■ CONTENTS ■ IMPORTANT NOTES ................................................2 CD Sockets ..........................................................................................3 [2] Operation ............................................................4 1. Connections ...........................................................................4 2. Switch Functions ............................................................6 | Specifications ......................................................................9 ■ IMPORTANT NOTES • To connect the BC-13 to the GR-50, be sure to use the C-13A cable supplied with the GR-50. Using any other cable will lead to problems. • The BC-13 can only be connected with the GR-50. Connecting it to any other unit will lead to problems. • When connecting the BC-13 to the GR-50, be sure that the GR-50 is switched off. • The exclusive cable (C-13A, C-24G) is a lock type cable, and therefore cannot be disconnected unless it is unlocked. • Handle the cables, gently. • Do not use this unit in the following conditions of: o excessive heat (where it may be affected by direct sunlight or a heater) o excessive humidity o where it may be affected by dust • For cleaning use a soft cloth. • When you use a mild detergent for cleaning this unit, be sure to wipe it with a dry cloth afterwards. • Do not use solvents such as paint thinner or alcohol when cleaning. • If this unit does not work properly, switch it off immediately, then call your local Roland service center. 2 1 Sockets 0 Output Socket 0 Input Socket O Normal Guitar Input Socket o b aaooDqo oa o) a a o a O do o ) r ® I Q ] © 0 Normal Guitar Input Socket Normal guitar signals are input through this socket. When using a G-Series guitar, connect the Normal Socket on the guitar to this socket. When using the GK-1, you may connect the Normal Socket on the guitar to the Normal Guitar Input Socket on the GK-1 instead of the above setup. Use the cable supplied with the GK-1. 0 Input Socket (24 pins) Signals (for playing a synthesizer) are input from a G-Series guitar or a GK-1 's divided pickups through this socket. Connect the guitar to the BC-13 with the C-24G cable. * Do not use any cable other than the C-24G, the Roland GR connection cable. 0 Output Socket (13 pins) Signals from a normal guitar and divided pickups are output through this socket. Connect the GR-50 to this socket with the C-13A cable. 3 2\ Operation 1. Connections 0 Connect a G-Series guitar or the GK-1 to the BC-13 as shown above. * When using the GK-1, input normal guitar signals to the GK-1 's Normal Guitar Input Socket with the cable supplied with the GK-1. - ‘ 4 * When using a G-Series guitar, the Normal Guitar Input Socket feeds normal guitar sounds. Without this connection, normal guitar sound will be available, but you will not be able to control the volume with the Volume Knob on the guitar. * When connecting to the Input Socket (24 pins), do not use any cable other than the C-24G cable. To disconnect this cable, you must unlock it. (Roland GR connection cables such as the C-24D can be connected, but this is not a good idea, as they are not lock type cables.) (2) Make sure that the GR-50 is switched off, then connect the GR-50 to the BC-13 as shown above using the C-13A cable which is supplied with the GR-50. * Do not use any cable other than the C-13A or problems may result. * The C-13A, the cable supplied with the GR-50, is a lock type cable and therefore cannot be disconnected unless it is unlocked. Pulling it hard without unlocking it will only damage it. (3) Switch on the GR-50. 5 2. Switch Functions The following switches canbe used for controlling the GR-50 with the GK-1 or a G-Series Guitar Controller (G-707, G-202, G-303, G-505 or G-808). [When using a G-Series Guitar] G-707 Touch Plate A (XXXXX) Touch Plate B Cutoff Frequency Knob Resonance Knob (or Edit Knob) Vibrato Depth Knob G-202, 303, 505, 808 Volume Knob Guitar Tone Knob Balance Knob Mode Switch Touch Plate A (XXXXX) Touch Plate B Volume Knob Cutoff Frequency Knob I I I I I I Resonance Knob (or Edit Knob) Vibrato Depth Knob Guitar Tone Knob Balance Knob Mode Switch • Volume Knob This controls the volume of the guitar's normal sound. • This knob does not work unless the Normal Guitar Socket on the guitar is connected to the Normal Guitar Input Socket on the BC-13. • Guitar Tone Knob This controls the tone of the guitar's normal sound. • This knob does not work unless the Normal Guitar Socket on the guitar is connected to the Normal Guitar Input Socket on the BC-13. • Cutoff Frequency Knob • This controls the volume of the signal sent from the divided pickups. • Resonance Knob (or Edit Knob) This selects one of the three t...