If you touch , the Factory Reset will not be performed, and you will return to the System screen. 5. When you touch , the Factory Reset operation will begin, and the settings will return to the factory-set condition. NOTE Never switch off the power while this operation is in progress! NOTE Loading factory default settings will erase any Registrations currently in the memory of the AT-90S/80S/60S. To save the registrations you are currently using, refer to “Saving Registration Sets to a Floppy Disk” (p. 84). NOTE If you want to restore the factory settings for only the Rhythm [Disk] button and [World] button, refer to p. 70, 73. You can also use the following method to return to the factory-set condition. 1. Make sure there is no floppy disk in the disk drive before carrying out the procedure. 2. Turn off the power. 3. While holding down the [One Touch Program] button, press the [Power On] switch to turn the power on. Hold down the [One Touch Program] button until the following is displayed. NOTE Never switch off the power while this operation is in progress! Power On Program One Touch Set About the Display About the Display The AT-90S/80S/60S makes use of a Touch Screen. This lets you carry out a wide variety of actions just by touching the screen lightly. ¦ Understanding the Main and Related Screens Main Screen 1 3 4 5 2 6 7 9 8 10 11 13 14 16 12 15 Number Explanations 1 Tempo 2 Measure 3 Beat 4 Bouncing Ball A ball will bounce in time with the rhythm or song. 5 Chord Name Displays the name of the chord that is played in the lower keyboard. 6 Indication button Pressed to choose which name to have indicated; either the Rhythm Name, Song Name, or Registration Name. 7 Rhythm Name/Song Name/Registration Name 8 Transpose Displays the transpose setting. 9 Voice Name Displays the name of the upper keyboard voice. NOTE The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may not always match what appears in the manual. NOTE The Touch Screen is operated by touching it lightly with your finger. Pressing hard, or using a hard object can damage the Touch Screen. Be careful not to press too hard, and be sure to use only your fingers to operate the Touch Screen. NOTE The positioning of the Touch Screen may become displaced due to changes in the surrounding environment and over time. If this happens, follow the steps in “Repositioning the Touch Screen” (p. 175) to correct the pointer position. NOTE Do not place items on the touch screen. Min Max Min Max Min Max Min Max Harmony Intelligence Min Max Min Max Min Max Min Max Harmony Intelligence About the Display Number Explanations 10 Music Assist Press this when you want to use the Music Assistant function (p. 30). 11 Sound/Kbd Select a voice (tone), or make settings for the effect depth, keyboard, etc. 12 Rhythm Play the internal rhythms, and play disk rhythms or store them in internal memory. Rhythm-related settings can also be made here. 13 Registration Load registrations from disk into internal memory, or save registrations to disk. Registration-related settings can also be made here. 14 Rec/Play Play back or record a song. You can also view a score display while a song plays. 15 System Make various settings. 16 Quick Guide Use the Quick Guide function (p. 27). contrast (p. 178). About the principal icons and the Utility screen NOTE You can adjust the LCD Button Meaning Depending on the function, some screens are spread over multiple pages. You can touch < >< > < >< > to display the next or previous page of the screen. Touch this when you want to exit (close) the currently displayed screen. Normally, touching < > several times takes you back to the Main screen. 26 About the Display Sub-windows You can touch or in the Main screen or in other screens to access a screen like the following. This type of screen is called a “sub-window.” Sub-windows for setting values When you are making settings in the System screen, the following type of screen appears. Return to the factory settings. Modify the value. When you touch a menu in the sub-window, the subwindow will close, and the selected menu screen will appear. In a sub-window, touch to exit the subwindow. Min Max Min Max Min Max Min Max Harmony Intelligence 27 About the Display ¦ About the Quick Guide function The AT-90S/80S/60S offers a Quick Guide function, which makes it easy for you to access various functions. While the Quick Guide screen is displayed, you can press the keyboard, a button, or a foot switch to jump to the related setting screen. 1. Display the Main screen. 2. Touch on the Main screen. The following Quick Guide screen appears for several seconds. 3. While the Quick Guide screen is displayed, press a button, keyboard, pedal...
Войти: