Оценок - 4, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
* The velocity values of Note Off messages are ignored. Note on Status 2nd bytes 3rd byte 9nH kkH vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) kk = note number : 00H-7FH (0-127) vv = note on velocity : 01H-7FH (1-127) * Not received when Rx.NOTE MESSAGE = OFF. (Initial value is ON) * For Drum Parts, not received when Rx.NOTE ON = OFF for each Instrument. Polyphonic Key Pressure Status 2nd bytes 3rd byte AnH kkH vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) kk = note number : 00H-7FH (0-127) vv = key pressure : 00H-7FH (0-127) * Not received when Rx.POLY PRESSURE (PAf) = OFF. (Initial value is ON) * The resulting effect is determined by System Exclusive messages. With the initial settings, there will be no effect. * Not Recieved in Keyboard Part. Control Change * When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel Mode messages will be ignored. * The value specified by a Control Change message will not be reset even by a Program Change, etc. .Bank Select (Controller number 0, 32) Status 2nd bytes 3rd byte BnH 00H mmH BnH 20H llH n = MIDI channel number : 0H-FH (ch.1-ch.16) mm, ll = Bank number : 00H, 00H-7FH, 7FH (bank.1-bank.16384), Initial Value = 00 00H (bank.1) * Not received when Rx.BANK SELECT = OFF. "Rx.BANK SELECT" is set to OFF by "Turn General MIDI System On," and set to ON by "GS RESET." (Power-on default value is ON.) * Bank Select processing will be suspended until a Program Change message is received. * The GS format "Variation number" is the value of the Bank Select MSB (Controller number 0) expressed in decimal. * Not Recieved in Keyboard Part. .Modulation (Controller number 1) Status 2nd bytes 3rd byte BnH 01H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Modulation depth : 00H-7FH (0-127) * Not received when Rx.MODULATION = OFF. (Initial value is ON) * The resulting effect is determined by System Exclusive messages. With the initial settings, this is Pitch Modulation Depth. .Portamento Time (Controller number 5) Status 2nd bytes 3rd byte BnH 05H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Portamento Time : 00H-7FH (0-127), Initial value = 00H (0) * This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control. A value of 0 results in the fastest change. .Data Entry (Controller number 6, 38) Status 2nd bytes 3rd byte BnH 06H mmH BnH 26H llH n = MIDI channel number : 0H-FH (ch.1-ch.16) mm, ll = the value of the parameter specified by RPN/NRPN .Volume (Controller number 7) Status 2nd bytes 3rd byte BnH 07H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Volume : 00H-7FH (0-127), Initial Value = 64H (100) * Volume messages are used to adjust the volume balance of each Part. * Not received when Rx.VOLUME = OFF. (Initial value is ON) * Not Recieved in Keyboard Part. .Pan (Controller number 10) Status 2nd bytes 3rd byte BnH 0AH vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = pan : 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center) * For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting. * Not received when Rx.PANPOT = OFF. (Initial value is ON) * Not Recieved in Keyboard Part. .Expression (Controller number 11) Status 2nd bytes 3rd byte BnH 0BH vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Expression : 00H-7FH (0-127), Initial Value = 7FH (127) * It can be used independently from Volume messages. Expression messages are used for musical expression within a performance; e.g., expression pedal movements, crescendo and decrescendo. * Not received when Rx.EXPRESSION = OFF. (Initial value is ON) * Not Recieved in Keyboard Part. .Glide (Controller number 16) Status 2nd bytes 3rd byte BnH 10H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON * It can be used on only keyborad part. Not recieved on GS part. .Hold 1 (Controller number 64) Status 2nd bytes 3rd byte BnH 40H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Control value : 00H-7FH (0-127) * Not received when Rx.HOLD1 = OFF. (Initial value is ON) .Portamento (Controller number 65) Status 2nd bytes 3rd byte BnH 41H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON * Not received when Rx.PORTAMENTO = OFF. (Initial value is ON) 1 AT-20R/30R MIDI IMPLEMENTATION .Sostenuto (Controller number 66) Status 2nd bytes 3rd byte BnH 42H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON * Not received when Rx.SOSTENUTO = OFF. (Initial value is ON) * Not Recieved in Keyboard Part. .Soft (Controller number 67) Status 2nd bytes 3rd byte BnH 43H vvH n = MIDI channel number : 0H-FH (ch.1-ch.16) vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON * Not received when Rx.SOFT = OFF. (Initial value is ON) * Not Recieved in Keyboard Part. .Portamento control (Controller number 84) Status 2nd bytes 3rd byte BnH 54H kkH n = MIDI channel num...