Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
RSS-8048 : Exact copy of codes is output. - ADA-8024 : Always at "0". RSS-8048 : Exact copy of received codes is output - Always at "0" on this unit. ■ Sampling frequency bit (fs ID code) 001 : 48 kHz 010: 44.1 kHz - Emphasis bit 100: Emphasis OFF 110: Emphasis ON (50}i sec/15|i sec) • Audio mode flag bit 0 : Audio mode 1 : Non-audio mode Always at "0" on this unit. Professional/Consumer mode flag bit 0 : Consumer-use 1 : Professional-use Always at "1" on this unit. IMPORTANT : In this system the last byte (24) of the Channel Status (CRC code) is not generated. Should you ever need to connect external equipment that "looks" for the CRC code, you must first turn off that function on that unit. ■ Specifications « RSS-8048 » • Signal Processing 24 bit • Sampling Frequency 44.1 kHz/48 kHz (automatically selected) • Controls/Switches Remote Channel Select Switch x 1 Power Switch x 1 • Displays/Indicators Remote Channel Number x 1 PLL Indicators x 2 Power Indicator x 1 • Connectors Remote In Connector x 1 Remote Out Connector x 1 Digital Input Connectors x 2 Digital Output Connectors x 4 • Digital Audio Signal AES/EBU Format (professional-use) • Power Supply AC 117V/230V/240V (50/60 Hz) • Power Consumption 25 W (117V/230V/240V) • Dimensions 482 (W) x 400 (D) x 88 (H) mm 19" (W) x 15-3/4" (D) x 3-1/2" (H) inches (Mounts on EIA-2U rack) « • Weight 6.4 kg 14.1 lbs. • Accessories Remote Cable; 7P DIN x 1 Power Cord x 1 Owner's Manual 16 « ADA-8024 » • Signal Processing A/D Conversion: 18-bit linear D/A Conversion: 20-bit linear • Sampling Frequency 44.1 kHz/48 kHz; A/D Conversion : Manually selected D/A Conversion : Automatically selected • Frequency Response 20 Hz to 20 kHz (+0.2 /-3 dB) • Nominal Input Level +4 dBm @ 0 dBm=0.775 Vrms • Input Impedance 20 kO • Output Impedance 200 Q • Connectors Analog Input Connectors x 2 (XLR type) Analog Output Connectors x 4 (XLR type) Digital Input Connectors x 2 (AES/EBU format; professional-use) Digital Output Connector x 1 (AES/EBU format; professional-use) • Power Supply AC 117V/230V/240V (50/60 Hz) • Power Consumption 38 W (117V/230V/240V) • Dimensions 482 (W) x 400 (D) x 88 (H) mm 19" (W) x 15-3/4" (D) x 3-1/2" (H) inches (Mounts on EIA-2U rack) • Weight 7.7 kg 17.0 lbs. Total Harmonic Distortion • Accessories 0.015% or less (1 kHz, at nominal input/output level) Connecting Cables; XLR type x 3 Power Cord x 1 S/N Ratio (Typical) Owner's Manual 86 dB (IHF-A) • Dynamic Range (Typical) 100 dB • Controls/Switches Input Levels x 2 Emphasis Switch x 1 Sampling Frequency Switch x 1 Power Switch x 1 • Displays/Indicators Input Level Meters x 2 Sampling Frequency Indicators x 6 Emphasis Indicators x 3 Power Indicator x 1 * In the interest of product development, the specifications and/or appearance of this unit are subject to change without prior notice. 17 ,———;—'—--—-----————:---- For West Germany Bescheiningung des Herstellers/Importeurs Hiermit wird bescheinigt, daß der/die/das in Übereinstimmung mit den Bestimmungen der SOUND SPACE PROCESSOR Rss-BMB Amtahl Vfn 104.fi/1QR4 ADA CONVERTER ADA-BDE4 _______ .Yi9. . .VftP. »! ..... (Gerät. Typ. Bezeichnung) (Amtsblattverfügung) funk-enstört ist. Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt. Roland Corporation Osaka/Japan Name des Herstellers/Importeurs • For the USA- RADIO AND TELEVISION INTERFERENCE WARNING — This equipment has been verified to comply with the limits for a Class B computing device, pursuant to Subpart J, of Part 15, of FCC rules. Operation with non-certified or non-verified equipment is likely to result in interference to radio and TV reception The equipment described in this manual generates and uses radio frequency energy. If it is not installed and used properly, that is. in strict accordance with our instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J, of Part 15, of FCC Rules. These rules are designed to provide reasonable protection against such a interference in a rasidential installation However, there is no guarantee that the interference will not occur in a particular installation If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by the following measure: • Disconnect other devices and their input/output cables one at a time If the interference stops, it is caused by either the other device or its I/O cable. These devices usually require Roland designated shielded I/O cables. For Roland devices, you can obtain the proper shielded cable from your dealer. For non Roland device...